From: Jon Smirl <jonsmirl@yahoo.com>
To: lkml <linux-kernel@vger.kernel.org>
Subject: libata and RAID
Date: Tue, 9 Mar 2004 15:42:23 -0800 (PST) [thread overview]
Message-ID: <20040309234223.20649.qmail@web14912.mail.yahoo.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 1545 bytes --]
My RAID setup broke with something I pulled in the last 24 hours on the 2.6
kernel. If I back off a version everything works fine.
I have an Intel i875P based motherboard with ICH5. Dell PE400SC. One RAID drive
is SATA other is IDE. dmesg shows the normal startup. My non-RAID SATA and IDE
parititions are working ok.
ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 18
ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors (lba48)
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
ata2: port disabled. ignoring.
ata2: thread exiting
scsi1 : ata_piix
Vendor: ATA Model: ST380013AS Rev: 1.01
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: raid1 personality registered as nr 3
but when raidstart runs it can't find /dev/md0.
I'm running udev for /dev so I check in /sys/block for md0 and see that it is
missing.
Missing /sys/block/md0 means no /dev/md0 will get created.
So what do I have to do to get /sys/block/md0 back?
=====
Jon Smirl
jonsmirl@yahoo.com
__________________________________
Do you Yahoo!?
Yahoo! Search - Find what you’re looking for faster
http://search.yahoo.com
reply other threads:[~2004-03-09 23:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040309234223.20649.qmail@web14912.mail.yahoo.com \
--to=jonsmirl@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®