From: Thomas Themel <themel@iwoars.net>
To: linux-kernel@vger.kernel.org
Subject: [themel@iwoars.net: PDC202XX_OLD regression between 2.6 and 2.4]
Date: Sat, 13 Mar 2004 14:20:50 +0100 [thread overview]
Message-ID: <20040313132050.GW19928@iwoars.net> (raw)
Hi,
[Repost, I tried on linux-ide first, but the list seems to be somewhat dead
(no traffic for the past three days other than someone who has similar
problems), so here we go again. Also, it seems linux-ide is not archived
anywhere.]
I'm currently trying to set up a system that contains a Promise 20267
controller, and it seems that DMA on that controller causes problems in
2.6.
My test case consists of simply creating an empty ext3 file system and
running bonnie++ on it. In 2.4.25, this works as expected. In 2.6.3-rc4,
however, it breaks after a few seconds:
Mar 11 17:27:19 sophokles kernel: hdg: dma_timer_expiry: dma status == 0x60
Mar 11 17:27:19 sophokles kernel: hdg: DMA timeout retry
Mar 11 17:27:19 sophokles kernel: PDC202XX: Secondary channel reset.
Mar 11 17:27:19 sophokles kernel: PDC202XX: Primary channel reset.
Mar 11 17:27:19 sophokles kernel: hdg: timeout waiting for DMA
Mar 11 17:27:40 sophokles kernel: hdg: dma_timer_expiry: dma status == 0x60
Mar 11 17:27:40 sophokles kernel: hdg: DMA timeout retry
Mar 11 17:27:40 sophokles kernel: PDC202XX: Secondary channel reset.
Mar 11 17:27:40 sophokles kernel: PDC202XX: Primary channel reset.
Mar 11 17:27:40 sophokles kernel: hdg: timeout waiting for DMA
Mar 11 17:28:02 sophokles kernel: hdg: dma_timer_expiry: dma status == 0x60
Mar 11 17:28:02 sophokles kernel: hdg: DMA timeout retry
Mar 11 17:28:02 sophokles kernel: PDC202XX: Secondary channel reset.
Mar 11 17:28:02 sophokles kernel: PDC202XX: Primary channel reset.
Mar 11 17:28:02 sophokles kernel: hdg: timeout waiting for DMA
Mar 11 17:28:22 sophokles kernel: hdg: dma_timer_expiry: dma status == 0x60
Mar 11 17:28:22 sophokles kernel: hdg: DMA timeout retry
Mar 11 17:28:22 sophokles kernel: PDC202XX: Secondary channel reset.
Mar 11 17:28:22 sophokles kernel: PDC202XX: Primary channel reset.
Mar 11 17:28:22 sophokles kernel: hdg: timeout waiting for DMA
Other information:
hdparm output is slightly different between 2.4 and 2.6 (hda is an
identical drive on a vt8233a controller on the motherboard) -
sophokles:~# diff -Nrua 2.4.25/ 2.6.4-rc3/
diff -Nrua 2.4.25/hda 2.6.4-rc3/hda
--- 2.4.25/hda 2004-03-11 19:48:29.000000000 +0100
+++ 2.6.4-rc3/hda 2004-03-11 19:52:28.000000000 +0100
@@ -6,5 +6,5 @@
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
- readahead = 8 (on)
- geometry = 14593/255/63, sectors = 234441648, start = 0
+ readahead = 256 (on)
+ geometry = 16383/255/63, sectors = 234441648, start = 0
diff -Nrua 2.4.25/hdg 2.6.4-rc3/hdg
--- 2.4.25/hdg 2004-03-11 19:48:32.000000000 +0100
+++ 2.6.4-rc3/hdg 2004-03-11 19:52:31.000000000 +0100
@@ -6,5 +6,5 @@
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
- readahead = 8 (on)
- geometry = 14593/255/63, sectors = 234441648, start = 0
+ readahead = 256 (on)
+ geometry = 16383/255/63, sectors = 234441648, start = 0
I am a bit confused by the geometry changes, but they can hardly
cause the problem since hda works nicely under 2.6.
Can I do anything to narrow this down, is there a way to get more
debugging output?
ciao,
--
[*Thomas Themel*] While differing widely in the various little bits we know,
[extended contact] in our infinite ignorance we are all equal.
[info provided in]
[*message header*] - Karl Popper
reply other threads:[~2004-03-13 13:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040313132050.GW19928@iwoars.net \
--to=themel@iwoars.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®