Slow network.

[Wakko Warner <wakko@animx.eu.org>]

I'm looking for some pointers as to why this is happening.

I have a machine with 2.4.25/2.6.4 (boots over network) that serves 2 hard
disks to my network.

It has a microstar ms-6163 systemboard (I think that's the right number), a
160gb maxtor as hda.  hda contains an ext3 filesystem.  Nic is a 3c905b with
MBA.  256mb memory.  700mhz (100fsb) pIII.

Reading a 2.9gb file off hda is took 1:51 minutes (~26mb/sec).
When I do this over nfs, it takes over 8 minutes (~5.7mb/sec).

I used to get around 11mb/sec transfer from this machine.  The changes I
made was a different board/cpu/memory/kernel version and used an 80wire ide
cable for hda.  The nic is the same, hda is the same.

The old machine was a celeron 333a, 40wire ide cable, 192mb ram.  I don't
know what the board model was.  With the old board, I saw about 32mb/sec on
the same file (local) and 11mb/sec (nfs).  The kernel was 2.4.20.

Does anyone have any ideas?  I looked at ifconfig, vmstat, /proc/interrupts
but nothing looks out of the ordinary.

I almost want to just downgrade the machine, but i like the microstar board
better (faster cpu).

-- 
 Lab tests show that use of micro$oft causes cancer in lab animals