/dev/hda:
 I/O support  =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  1 (on)
 readahead    = 256 (on)

 Model=AOPEN CD-RW CRW3248 1.12 20020417, FwRev=1.12, SerialNo=
 Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
 RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
 BuffType=unknown, BuffSize=0kB, MaxMultSect=0
 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 
 AdvancedPM=no
 Drive Supports : ATA/ATAPI-5 T13 1321D revision 3 : ATA-5 

 busstate     =  1 (on)

/dev/hdb:
 multcount    = 16 (on)
 I/O support  =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 6704/15/63, sectors = 6335280, start = 0

 Model=FUJITSU MPC3032AT, FwRev=6021, SerialNo=05996345
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=6704/15/63, TrkSize=0, SectSize=0, ECCbytes=4
 BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=16
 CurCHS=6704/15/63, CurSects=6335280, LBA=yes, LBAsects=6335280
 IORDY=yes, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 
 AdvancedPM=no WriteCache=disabled
 Drive Supports : Reserved : ATA-1 ATA-2 ATA-3 

 busstate     =  1 (on)

/dev/hdc:
 multcount    = 16 (on)
 I/O support  =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 16383/255/63, sectors = 120103200, start = 0

 Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2RAK8XH
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16
 CurCHS=4047/16/255, CurSects=16511760, LBA=yes, LBAsects=120103200
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4 udma5 
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive Supports : Reserved : Reserved : Reserved : ATA/ATAPI-6 T13 1410D revisio
n 1 : Reserved : Reserved : Reserved : ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 

 busstate     =  1 (on)

/dev/hdd:
 multcount    =  8 (on)
 I/O support  =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 19885/16/63, sectors = 20044080, start = 0

 Model=QUANTUM FIREBALLlct20 10, FwRev=APL.0900, SerialNo=551142872298
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=32256, SectSize=21298, ECCbytes=4
 BuffType=DualPortCache, BuffSize=418kB, MaxMultSect=8, MultSect=8
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=20044080
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes: pio0 pio1 pio2 pio3 pio4 
 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 
 AdvancedPM=no WriteCache=enabled
 Drive Supports : ATA/ATAPI-5 T13 1321D revision 1 : ATA-1 ATA-2 ATA-3 ATA-4 ATA
-5 

 busstate     =  1 (on)