From: Dub Spencer <dub@lazy.shacknet.nu>
To: Linux Kernel <linux-kernel@vger.kernel.org>
Cc: linuxbugs@nvidia.com
Subject: 2.6.5 hangs when burning cdrom while watching tv
Date: Sat, 10 Apr 2004 12:51:36 +0200 [thread overview]
Message-ID: <20040410105136.GA2177@lazy.shacknet.nu> (raw)
[-- Attachment #1: Type: text/plain, Size: 485 bytes --]
hello,
when motv is running (bttv module, overlay mode) and then burning a cd
at higher speeds, the system stops: ie. shift led on keyboard no longer
lights. when burning at lower speeds (10x for cdrw) the system only
hung, when starting mozilla firebird (aka heavy application).
unfortunately, there is nothing in the logs; kernel configured for
preemption, nvidia binary module loaded. uname, lspci, lsmod and
config.gz attached.
anything I can do, to get an oops?
regards
dub
[-- Attachment #2: uname --]
[-- Type: text/plain, Size: 65 bytes --]
Linux lazy 2.6.5 #13 Sun Apr 4 17:08:39 CEST 2004 i686 GNU/Linux
[-- Attachment #3: lspci --]
[-- Type: text/plain, Size: 1257 bytes --]
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:00:08.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
0000:00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
0000:00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2)
[-- Attachment #4: lsmod --]
[-- Type: text/plain, Size: 1292 bytes --]
Module Size Used by
snd_seq_midi 6240 -
snd_seq_oss 31488 -
snd_seq_midi_event 6080 -
snd_seq 50736 -
snd_via82xx 21984 -
snd_mpu401_uart 5952 -
ehci_hcd 23940 -
uhci_hcd 29424 -
usbcore 90844 -
snd_bt87x 10980 -
tuner 16908 -
tvaudio 20268 -
bttv 141708 -
video_buf 16388 -
i2c_algo_bit 8680 -
v4l2_common 4704 -
btcx_risc 3656 -
videodev 6720 -
snd_ens1371 19748 -
snd_rawmidi 20000 -
snd_seq_device 6248 -
snd_pcm_oss 48772 -
snd_mixer_oss 16960 -
snd_pcm 84900 -
snd_page_alloc 8740 -
snd_timer 21092 -
snd_ac97_codec 61220 -
snd 44036 -
soundcore 6752 -
8139too 20288 -
w83627hf 26276 -
eeprom 6024 -
i2c_sensor 2144 -
i2c_isa 1472 -
i2c_viapro 5676 -
i2c_core 17924 -
loop 12232 -
nvidia 2067400 -
[-- Attachment #5: config.gz --]
[-- Type: application/octet-stream, Size: 1234 bytes --]
next reply other threads:[~2004-04-10 10:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-10 10:51 Dub Spencer [this message]
2004-04-10 12:21 ` Dub Spencer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040410105136.GA2177@lazy.shacknet.nu \
--to=dub@lazy.shacknet.nu \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxbugs@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®