From: Colin Leroy <colin@colino.net>
To: David Brownell <david-b@pacbell.net>
Cc: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net
Subject: Re: [PATCH] Re: [linux-usb-devel] 2.6.6-rc1: cdc-acm still (differently) broken
Date: Sat, 17 Apr 2004 11:54:25 +0200 [thread overview]
Message-ID: <20040417115425.0b2f0d6a@jack.colino.net> (raw)
In-Reply-To: <20040416234813.0aaa44cf@jack.colino.net>
[-- Attachment #1: Type: text/plain, Size: 187 bytes --]
On 16 Apr 2004 at 23h04, Colin Leroy wrote:
Hi,
> Ok, here is the cosmetic patch following the previous one, then :)
Uhm, previous patch is broken.
Here are the two again.
--
Colin
[-- Attachment #2: 1_cdc-acm.patch --]
[-- Type: application/octet-stream, Size: 3474 bytes --]
--- drivers/usb/class/cdc-acm.c.orig 2004-04-15 20:04:47.000000000 +0200
+++ drivers/usb/class/cdc-acm.c 2004-04-16 12:21:40.120865512 +0200
@@ -581,45 +581,47 @@
dev = interface_to_usbdev (intf);
- cfacm = dev->actconfig;
-
- for (j = 0; j < cfacm->desc.bNumInterfaces - 1; j++) {
-
- if (usb_interface_claimed(cfacm->interface[j]) ||
- usb_interface_claimed(cfacm->interface[j + 1]))
- continue;
+ cfacm = dev->actconfig;
+
+ /* We know we're probe()d with the control interface. */
+ ifcom = intf->cur_altsetting;
- /* We know we're probe()d with the control interface.
- * FIXME ACM doesn't guarantee the data interface is
+ /* ACM doesn't guarantee the data interface is
* adjacent to the control interface, or that if one
- * is there it's not for call management ... so use
- * the cdc union descriptor whenever there is one.
+ * is there it's not for call management ... so find
+ * it
*/
- ifcom = intf->cur_altsetting;
- if (intf == cfacm->interface[j]) {
- ifdata = cfacm->interface[j + 1]->cur_altsetting;
- data = cfacm->interface[j + 1];
- } else if (intf == cfacm->interface[j + 1]) {
+ for (j = 0; j < cfacm->desc.bNumInterfaces; j++) {
ifdata = cfacm->interface[j]->cur_altsetting;
data = cfacm->interface[j];
- } else
- continue;
-
- if (ifdata->desc.bInterfaceClass != 10 || ifdata->desc.bNumEndpoints < 2)
- continue;
-
- epctrl = &ifcom->endpoint[0].desc;
- epread = &ifdata->endpoint[0].desc;
- epwrite = &ifdata->endpoint[1].desc;
-
- if ((epctrl->bEndpointAddress & 0x80) != 0x80 || (epctrl->bmAttributes & 3) != 3 ||
- (epread->bmAttributes & 3) != 2 || (epwrite->bmAttributes & 3) != 2 ||
- ((epread->bEndpointAddress & 0x80) ^ (epwrite->bEndpointAddress & 0x80)) != 0x80)
- continue;
-
- if ((epread->bEndpointAddress & 0x80) != 0x80) {
- epread = &ifdata->endpoint[1].desc;
- epwrite = &ifdata->endpoint[0].desc;
+
+ if (ifdata->desc.bInterfaceClass == 10 &&
+ ifdata->desc.bNumEndpoints == 2) {
+ epctrl = &ifcom->endpoint[0].desc;
+ epread = &ifdata->endpoint[0].desc;
+ epwrite = &ifdata->endpoint[1].desc;
+
+ if ((epctrl->bEndpointAddress & 0x80) != 0x80 ||
+ (epctrl->bmAttributes & 3) != 3 ||
+ (epread->bmAttributes & 3) != 2 ||
+ (epwrite->bmAttributes & 3) != 2 ||
+ ((epread->bEndpointAddress & 0x80) ^ (epwrite->bEndpointAddress & 0x80)) != 0x80)
+ goto next_interface;
+
+ dbg("found data interface at %d\n", j);
+ break;
+ } else {
+next_interface:
+ ifdata = NULL;
+ data = NULL;
+ }
+ }
+
+ /* there's been a problem */
+ if (!ifdata) {
+ dbg("interface not found (%p)\n", ifdata);
+ return -ENODEV;
+
}
for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
@@ -696,16 +698,21 @@
acm->line.databits = 8;
acm_set_line(acm, &acm->line);
- usb_driver_claim_interface(&acm_driver, data, acm);
+ if ( (j = usb_driver_claim_interface(&acm_driver, data, acm)) != 0) {
+ err("claim failed");
+ usb_free_urb(acm->ctrlurb);
+ usb_free_urb(acm->readurb);
+ usb_free_urb(acm->writeurb);
+ kfree(acm);
+ kfree(buf);
+ return j;
+ }
tty_register_device(acm_tty_driver, minor, &intf->dev);
acm_table[minor] = acm;
usb_set_intfdata (intf, acm);
return 0;
- }
-
- return -EIO;
}
static void acm_disconnect(struct usb_interface *intf)
[-- Attachment #3: 2_cdc-acm-cosmetic.patch --]
[-- Type: application/octet-stream, Size: 7663 bytes --]
--- drivers/usb/class/cdc-acm.c.new 2004-04-16 23:44:14.208234976 +0200
+++ drivers/usb/class/cdc-acm.c 2004-04-16 23:44:45.442486648 +0200
@@ -581,138 +581,138 @@
dev = interface_to_usbdev (intf);
- cfacm = dev->actconfig;
-
- /* We know we're probe()d with the control interface. */
- ifcom = intf->cur_altsetting;
-
- /* ACM doesn't guarantee the data interface is
- * adjacent to the control interface, or that if one
- * is there it's not for call management ... so find
- * it
- */
- for (j = 0; j < cfacm->desc.bNumInterfaces; j++) {
- ifdata = cfacm->interface[j]->cur_altsetting;
- data = cfacm->interface[j];
-
- if (ifdata->desc.bInterfaceClass == 10 &&
- ifdata->desc.bNumEndpoints == 2) {
- epctrl = &ifcom->endpoint[0].desc;
- epread = &ifdata->endpoint[0].desc;
- epwrite = &ifdata->endpoint[1].desc;
-
- if ((epctrl->bEndpointAddress & 0x80) != 0x80 ||
- (epctrl->bmAttributes & 3) != 3 ||
- (epread->bmAttributes & 3) != 2 ||
- (epwrite->bmAttributes & 3) != 2 ||
- ((epread->bEndpointAddress & 0x80) ^ (epwrite->bEndpointAddress & 0x80)) != 0x80)
- goto next_interface;
-
- dbg("found data interface at %d\n", j);
- break;
- } else {
+ cfacm = dev->actconfig;
+
+ /* We know we're probe()d with the control interface. */
+ ifcom = intf->cur_altsetting;
+
+ /* ACM doesn't guarantee the data interface is
+ * adjacent to the control interface, or that if one
+ * is there it's not for call management ... so find
+ * it
+ */
+ for (j = 0; j < cfacm->desc.bNumInterfaces; j++) {
+ ifdata = cfacm->interface[j]->cur_altsetting;
+ data = cfacm->interface[j];
+
+ if (ifdata->desc.bInterfaceClass == 10 &&
+ ifdata->desc.bNumEndpoints == 2) {
+ epctrl = &ifcom->endpoint[0].desc;
+ epread = &ifdata->endpoint[0].desc;
+ epwrite = &ifdata->endpoint[1].desc;
+
+ if ((epctrl->bEndpointAddress & 0x80) != 0x80 ||
+ (epctrl->bmAttributes & 3) != 3 ||
+ (epread->bmAttributes & 3) != 2 ||
+ (epwrite->bmAttributes & 3) != 2 ||
+ ((epread->bEndpointAddress & 0x80) ^ (epwrite->bEndpointAddress & 0x80)) != 0x80)
+ goto next_interface;
+
+ dbg("found data interface at %d\n", j);
+ break;
+ } else {
next_interface:
- ifdata = NULL;
- data = NULL;
- }
- }
-
- /* there's been a problem */
- if (!ifdata) {
- dbg("interface not found (%p)\n", ifdata);
- return -ENODEV;
-
- }
-
- for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
- if (acm_table[minor]) {
- err("no more free acm devices");
- return -ENODEV;
- }
-
- if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) {
- err("out of memory");
- return -ENOMEM;
- }
- memset(acm, 0, sizeof(struct acm));
-
- ctrlsize = epctrl->wMaxPacketSize;
- readsize = epread->wMaxPacketSize;
- acm->writesize = epwrite->wMaxPacketSize;
- acm->control = intf;
- acm->data = data;
- acm->minor = minor;
- acm->dev = dev;
-
- acm->bh.func = acm_rx_tasklet;
- acm->bh.data = (unsigned long) acm;
- INIT_WORK(&acm->work, acm_softint, acm);
-
- if (!(buf = kmalloc(ctrlsize + readsize + acm->writesize, GFP_KERNEL))) {
- err("out of memory");
- kfree(acm);
- return -ENOMEM;
- }
-
- acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
- if (!acm->ctrlurb) {
- err("out of memory");
- kfree(acm);
- kfree(buf);
- return -ENOMEM;
- }
- acm->readurb = usb_alloc_urb(0, GFP_KERNEL);
- if (!acm->readurb) {
- err("out of memory");
- usb_free_urb(acm->ctrlurb);
- kfree(acm);
- kfree(buf);
- return -ENOMEM;
- }
- acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
- if (!acm->writeurb) {
- err("out of memory");
- usb_free_urb(acm->readurb);
- usb_free_urb(acm->ctrlurb);
- kfree(acm);
- kfree(buf);
- return -ENOMEM;
- }
-
- usb_fill_int_urb(acm->ctrlurb, dev, usb_rcvintpipe(dev, epctrl->bEndpointAddress),
- buf, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
-
- usb_fill_bulk_urb(acm->readurb, dev, usb_rcvbulkpipe(dev, epread->bEndpointAddress),
- buf += ctrlsize, readsize, acm_read_bulk, acm);
- acm->readurb->transfer_flags |= URB_NO_FSBR;
-
- usb_fill_bulk_urb(acm->writeurb, dev, usb_sndbulkpipe(dev, epwrite->bEndpointAddress),
- buf += readsize, acm->writesize, acm_write_bulk, acm);
- acm->writeurb->transfer_flags |= URB_NO_FSBR;
-
- dev_info(&intf->dev, "ttyACM%d: USB ACM device", minor);
-
- acm_set_control(acm, acm->ctrlout);
-
- acm->line.speed = cpu_to_le32(9600);
- acm->line.databits = 8;
- acm_set_line(acm, &acm->line);
-
- if ( (j = usb_driver_claim_interface(&acm_driver, data, acm)) != 0) {
- err("claim failed");
- usb_free_urb(acm->ctrlurb);
- usb_free_urb(acm->readurb);
- usb_free_urb(acm->writeurb);
- kfree(acm);
- kfree(buf);
- return j;
- }
-
- tty_register_device(acm_tty_driver, minor, &intf->dev);
-
- acm_table[minor] = acm;
- usb_set_intfdata (intf, acm);
- return 0;
+ ifdata = NULL;
+ data = NULL;
+ }
+ }
+
+ /* there's been a problem */
+ if (!ifdata) {
+ dbg("interface not found (%p)\n", ifdata);
+ return -ENODEV;
+
+ }
+
+ for (minor = 0; minor < ACM_TTY_MINORS && acm_table[minor]; minor++);
+ if (acm_table[minor]) {
+ err("no more free acm devices");
+ return -ENODEV;
+ }
+
+ if (!(acm = kmalloc(sizeof(struct acm), GFP_KERNEL))) {
+ err("out of memory");
+ return -ENOMEM;
+ }
+ memset(acm, 0, sizeof(struct acm));
+
+ ctrlsize = epctrl->wMaxPacketSize;
+ readsize = epread->wMaxPacketSize;
+ acm->writesize = epwrite->wMaxPacketSize;
+ acm->control = intf;
+ acm->data = data;
+ acm->minor = minor;
+ acm->dev = dev;
+
+ acm->bh.func = acm_rx_tasklet;
+ acm->bh.data = (unsigned long) acm;
+ INIT_WORK(&acm->work, acm_softint, acm);
+
+ if (!(buf = kmalloc(ctrlsize + readsize + acm->writesize, GFP_KERNEL))) {
+ err("out of memory");
+ kfree(acm);
+ return -ENOMEM;
+ }
+
+ acm->ctrlurb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!acm->ctrlurb) {
+ err("out of memory");
+ kfree(acm);
+ kfree(buf);
+ return -ENOMEM;
+ }
+ acm->readurb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!acm->readurb) {
+ err("out of memory");
+ usb_free_urb(acm->ctrlurb);
+ kfree(acm);
+ kfree(buf);
+ return -ENOMEM;
+ }
+ acm->writeurb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!acm->writeurb) {
+ err("out of memory");
+ usb_free_urb(acm->readurb);
+ usb_free_urb(acm->ctrlurb);
+ kfree(acm);
+ kfree(buf);
+ return -ENOMEM;
+ }
+
+ usb_fill_int_urb(acm->ctrlurb, dev, usb_rcvintpipe(dev, epctrl->bEndpointAddress),
+ buf, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
+
+ usb_fill_bulk_urb(acm->readurb, dev, usb_rcvbulkpipe(dev, epread->bEndpointAddress),
+ buf += ctrlsize, readsize, acm_read_bulk, acm);
+ acm->readurb->transfer_flags |= URB_NO_FSBR;
+
+ usb_fill_bulk_urb(acm->writeurb, dev, usb_sndbulkpipe(dev, epwrite->bEndpointAddress),
+ buf += readsize, acm->writesize, acm_write_bulk, acm);
+ acm->writeurb->transfer_flags |= URB_NO_FSBR;
+
+ dev_info(&intf->dev, "ttyACM%d: USB ACM device", minor);
+
+ acm_set_control(acm, acm->ctrlout);
+
+ acm->line.speed = cpu_to_le32(9600);
+ acm->line.databits = 8;
+ acm_set_line(acm, &acm->line);
+
+ if ( (j = usb_driver_claim_interface(&acm_driver, data, acm)) != 0) {
+ err("claim failed");
+ usb_free_urb(acm->ctrlurb);
+ usb_free_urb(acm->readurb);
+ usb_free_urb(acm->writeurb);
+ kfree(acm);
+ kfree(buf);
+ return j;
+ }
+
+ tty_register_device(acm_tty_driver, minor, &intf->dev);
+
+ acm_table[minor] = acm;
+ usb_set_intfdata (intf, acm);
+ return 0;
}
static void acm_disconnect(struct usb_interface *intf)
next prev parent reply other threads:[~2004-04-17 10:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-15 18:11 Colin Leroy
2004-04-15 18:50 ` [linux-usb-devel] " Oliver Neukum
2004-04-15 18:54 ` David Brownell
2004-04-15 19:23 ` Colin Leroy
2004-04-15 19:59 ` David Brownell
2004-04-16 10:24 ` Colin Leroy
2004-04-16 18:44 ` David Brownell
2004-04-16 21:48 ` [PATCH] " Colin Leroy
2004-04-17 9:54 ` Colin Leroy [this message]
2004-04-15 20:24 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040417115425.0b2f0d6a@jack.colino.net \
--to=colin@colino.net \
--cc=david-b@pacbell.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®