Re: Sensors (W83627HF) in Tyan S2882

[Jan Kasprzak <kas@informatics.muni.cz>]

Fabian Fenaut wrote:
: Jan Kasprzak a écrit le 19.04.2004 14:01:
: >
: >I have two systems with Tyan S2882 boards (K8S Pro). The sensors chip is
: >Winbond w83627hf according to the mainboard documentation.  The w83627hf 
: >driver can read values from the sensors, but apparently not all values. The
: >board has six fan connectors (two labeled CPU1 fan and CPU2 fan, and four
: >chassis fans). BIOS displays the fan status correctly for all fans, so all
: >fans are connected to the sensors chip. However, there are only three fans
: >listed in /sys/devices/platform/i2c-1/1-0290.
: 
: 
: Probably unrelated to your problem, but isn't there a typo in 
: drivers/i2c/chips/Kconfig ? maybe patch below ?
: 
	Yes, I had CONFIG_SENSORS_W83781D=y. I have recompiled with
CONFIG_SENSORS_W83627HF=y and without CONFIG_SENSORS_W83781D, but the new
kernel still can see only three fans.

-Yenya

-- 
| Jan "Yenya" Kasprzak  <kas at {fi.muni.cz - work | yenya.net - private}> |
| GPG: ID 1024/D3498839      Fingerprint 0D99A7FB206605D7 8B35FCDE05B18A5E |
| http://www.fi.muni.cz/~kas/   Czech Linux Homepage: http://www.linux.cz/ |
 Any compiler or language that likes to hide things like memory allocations
 behind your back just isn't a good choice for a kernel.   --Linus Torvalds