I am getting these too in recent kernels, but only on a 10Mhz half-duplex network. I have to manually down and up the interface to recover. On a 100Mhz switched network, the e100 is OK (at least 12hours+). Mike. NETDEV WATCHDOG: eth0: transmit timed out --- Mike@Keehan.net wrote: > ----- Forwarded message from Eamonn Hamilton > ----- > > Subject: e100 NETDEV WATCHDOG transmit timeout since 2.6.4 > From: Eamonn Hamilton > To: linux-kernel@vger.kernel.org > Date: Tue, 20 Apr 2004 10:13:33 +0100 > > Hi, > > Since 2.6.4 my ethernet interface is timing out after successfully > operating for 30 minutes or so, and is reset by the watchdog and runs > for another 30 minutes or so. This behaviour is only since 2.6.4 when > I > believe a rewrite of the code was done. I've tried it with acpi > disabled, and got the same results if this helps. > > Anybody got any ideas? > > Cheers, > Eamonn > -- > Eamonn Hamilton > > - > To unsubscribe from this list: send the line "unsubscribe > linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > > > ----- End forwarded message ----- __________________________________ Do you Yahoo!? Yahoo! Photos: High-quality 4x6 digital prints for 25¢ http://photos.yahoo.com/ph/print_splash