Linux version 2.4.26 (root@reddog) (gcc version 3.2.3) #8 Fri Apr 16 14:59:15 EDT 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
 BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 VIAP4X                                    ) @ 0x000f7240
ACPI: RSDT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: MADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff6d80
ACPI: DSDT (v001 VIAP4X AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
Kernel command line: BOOT_IMAGE=linux2 ro root=301
Initializing CPU#0
Detected 1996.659 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3984.58 BogoMIPS
Memory: 255992k/262080k available (1792k kernel code, 5700k reserved, 678k data, 116k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
PCI: Using configuration type 1
    ACPI-0597: *** Warning: ns_lookup: Type mismatch on _PR_ (Scope), searching for (resource_fld)
    ACPI-0227: *** Error: Invalid type (Scope) for target of Scope operator [\_PR] (Cannot override)
    ACPI-1133: *** Error: [NULL NAME], AE_AML_OPERAND_TYPE
    ACPI-0125: *** Error: acpi_load_tables: Could not load namespace: AE_AML_OPERAND_TYPE
    ACPI-0134: *** Error: acpi_load_tables: Could not load tables: AE_AML_OPERAND_TYPE
ACPI: Unable to load the System Description Tables
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
BIOS EDD facility v0.10 2003-Dec-05, 2 devices found
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT372: IDE controller at PCI slot 00:0f.0
PCI: Found IRQ 10 for device 00:0f.0
PCI: Sharing IRQ 10 with 00:10.1
HPT372: chipset revision 5
HPT372: not 100% native mode: will probe irqs later
HPT37X: using 33MHz PCI clock
    ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd808-0xd80f, BIOS settings: hdg:pio, hdh:pio
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
    ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD400BB-53DEA0, ATA DISK drive
hdb: IOMEGA ZIP 100, ATA DISK drive
blk: queue c03b5400, I/O limit 4095Mb (mask 0xffffffff)
hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdb: set_drive_speed_status: error=0x04 { DriveStatusError }
ide0: Drive 1 didn't accept speed setting. Oh, well.
hdc: Pioneer DVD-ROM ATAPIModel DVD-106S 012, ATAPI CD/DVD-ROM drive
hdd: PCRW804, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: 196608 sectors (101 MB) w/16KiB Cache, CHS=512/12/32
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
Partition check:
 hda: hda1 hda2 hda3 hda4
 hdb: hdb1
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  2322.400 MB/sec
   32regs    :  1505.600 MB/sec
   pIII_sse  :  2615.600 MB/sec
   pII_mmx   :  2336.400 MB/sec
   p5_mmx    :  2253.200 MB/sec
raid5: using function: pIII_sse (2615.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 116k freed
Adding Swap: 1714600k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
ide0(3,2):Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,4)) ...
for (ide0(3,4))
ide0(3,4):Using r5 hash to sort names
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:10.3
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 11, pci mem d0a5d000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:10.0
PCI: Sharing IRQ 11 with 00:08.0
PCI: Sharing IRQ 11 with 00:0e.0
uhci.c: USB UHCI at I/O 0xdc00, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:10.1
PCI: Sharing IRQ 10 with 00:0f.0
uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:10.2
PCI: Sharing IRQ 5 with 00:0d.0
uhci.c: USB UHCI at I/O 0xe400, IRQ 5
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:0e.0
PCI: Sharing IRQ 11 with 00:08.0
PCI: Sharing IRQ 11 with 00:10.0
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 5 for device 00:0d.0
PCI: Sharing IRQ 5 with 00:10.2
eth0: RealTek RTL8139 at 0xd0aa5000, 00:50:2c:06:d2:31, IRQ 5
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
hub.c: new USB device 00:10.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x813/0x2) is not claimed by any active driver.
usb-uhci.c: $Revision: 1.275 $ time 00:22:44 Apr 19 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Linux video capture interface: v1.00
usb.c: registered new driver ov511
ov511.c: USB OV511+ video device found
ov511.c: model: Generic Camera (no ID)
ov511.c: Sensor is an OV6620
ov511.c: Device at usb-00:10.2-2 registered to minor 0
ov511.c: v1.65 : ov511 USB Camera Driver
ov511_decomp.c: v1.6 : OV511 Decompression Module