From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: akpm@osdl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] s390 (5/9): dasd device driver.
Date: Wed, 21 Apr 2004 16:47:32 +0200 [thread overview]
Message-ID: <20040421144732.GF2951@mschwid3.boeblingen.de.ibm.com> (raw)
[PATCH] s390: dasd driver
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
dasd device driver changes:
- Initialize open_count with -1 to account for blkdev_open in
dasd_scan_partitions.
- Introduce USE_ERP request flag to selectivly switch off error
recovery for reserve, release & unconditional reserve ioctls.
diffstat:
drivers/s390/block/dasd.c | 15 +++++++++++----
drivers/s390/block/dasd_3990_erp.c | 3 ++-
drivers/s390/block/dasd_eckd.c | 5 ++++-
drivers/s390/block/dasd_int.h | 6 +++++-
4 files changed, 22 insertions(+), 7 deletions(-)
diff -urN linux-2.6/drivers/s390/block/dasd.c linux-2.6-s390/drivers/s390/block/dasd.c
--- linux-2.6/drivers/s390/block/dasd.c Sun Apr 4 05:37:06 2004
+++ linux-2.6-s390/drivers/s390/block/dasd.c Wed Apr 21 16:29:38 2004
@@ -7,7 +7,7 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001
*
- * $Revision: 1.136 $
+ * $Revision: 1.139 $
*/
#include <linux/config.h>
@@ -74,6 +74,8 @@
if (device == NULL)
return ERR_PTR(-ENOMEM);
memset(device, 0, sizeof (struct dasd_device));
+ /* open_count = 0 means device online but not in use */
+ atomic_set(&device->open_count, -1);
/* Get two pages for normal block device operations. */
device->ccw_mem = (void *) __get_free_pages(GFP_ATOMIC | GFP_DMA, 1);
@@ -549,6 +551,7 @@
}
strncpy((char *) &cqr->magic, magic, 4);
ASCEBC((char *) &cqr->magic, 4);
+ set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
dasd_get_device(device);
return cqr;
}
@@ -597,6 +600,7 @@
}
strncpy((char *) &cqr->magic, magic, 4);
ASCEBC((char *) &cqr->magic, 4);
+ set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
dasd_get_device(device);
return cqr;
}
@@ -688,9 +692,10 @@
rc = ccw_device_clear(device->cdev, (long) cqr);
switch (rc) {
case 0: /* termination successful */
- if (cqr->retries > 0)
+ if (cqr->retries > 0) {
+ cqr->retries--;
cqr->status = DASD_CQR_QUEUED;
- else
+ } else
cqr->status = DASD_CQR_FAILED;
cqr->stopclk = get_clock();
break;
@@ -982,6 +987,8 @@
irb->scsw.cstat == 0 &&
!irb->esw.esw0.erw.cons)
era = dasd_era_none;
+ else if (!test_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags))
+ era = dasd_era_fatal; /* don't recover this request */
else if (irb->esw.esw0.erw.cons)
era = device->discipline->examine_error(cqr, irb);
else
@@ -1875,7 +1882,7 @@
* the blkdev_get in dasd_scan_partitions. We are only interested
* in the other openers.
*/
- max_count = device->bdev ? 1 : 0;
+ max_count = device->bdev ? 0 : -1;
if (atomic_read(&device->open_count) > max_count) {
printk (KERN_WARNING "Can't offline dasd device with open"
" count = %i.\n",
diff -urN linux-2.6/drivers/s390/block/dasd_3990_erp.c linux-2.6-s390/drivers/s390/block/dasd_3990_erp.c
--- linux-2.6/drivers/s390/block/dasd_3990_erp.c Sun Apr 4 05:38:00 2004
+++ linux-2.6-s390/drivers/s390/block/dasd_3990_erp.c Wed Apr 21 16:29:38 2004
@@ -5,7 +5,7 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000, 2001
*
- * $Revision: 1.28 $
+ * $Revision: 1.30 $
*/
#include <linux/timer.h>
@@ -1763,6 +1763,7 @@
erp->magic = default_erp->magic;
erp->expires = 0;
erp->retries = 256;
+ cqr->buildclk = get_clock();
erp->status = DASD_CQR_FILLED;
/* remove the default erp */
diff -urN linux-2.6/drivers/s390/block/dasd_eckd.c linux-2.6-s390/drivers/s390/block/dasd_eckd.c
--- linux-2.6/drivers/s390/block/dasd_eckd.c Sun Apr 4 05:36:13 2004
+++ linux-2.6-s390/drivers/s390/block/dasd_eckd.c Wed Apr 21 16:29:38 2004
@@ -7,7 +7,7 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.53 $
+ * $Revision: 1.54 $
*/
#include <linux/config.h>
@@ -1130,6 +1130,7 @@
cqr->cpaddr->count = 32;
cqr->cpaddr->cda = (__u32)(addr_t) cqr->data;
cqr->device = device;
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->retries = 0;
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
@@ -1173,6 +1174,7 @@
cqr->cpaddr->count = 32;
cqr->cpaddr->cda = (__u32)(addr_t) cqr->data;
cqr->device = device;
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->retries = 0;
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
@@ -1215,6 +1217,7 @@
cqr->cpaddr->count = 32;
cqr->cpaddr->cda = (__u32)(addr_t) cqr->data;
cqr->device = device;
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->retries = 0;
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
diff -urN linux-2.6/drivers/s390/block/dasd_int.h linux-2.6-s390/drivers/s390/block/dasd_int.h
--- linux-2.6/drivers/s390/block/dasd_int.h Sun Apr 4 05:37:37 2004
+++ linux-2.6-s390/drivers/s390/block/dasd_int.h Wed Apr 21 16:29:38 2004
@@ -6,7 +6,7 @@
* Bugreports.to..: <Linux390@de.ibm.com>
* (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
*
- * $Revision: 1.56 $
+ * $Revision: 1.57 $
*/
#ifndef DASD_INT_H
@@ -159,6 +159,7 @@
struct ccw1 *cpaddr; /* address of channel program */
char status; /* status of this request */
short retries; /* A retry counter */
+ unsigned long flags; /* flags of this request */
/* ... and how */
unsigned long starttime; /* jiffies time of request start */
@@ -192,6 +193,9 @@
#define DASD_CQR_ERROR 0x04 /* request is completed with error */
#define DASD_CQR_FAILED 0x05 /* request is finally failed */
+/* per dasd_ccw_req flags */
+#define DASD_CQR_FLAGS_USE_ERP 0 /* use ERP for this request */
+
/* Signature for error recovery functions. */
typedef struct dasd_ccw_req *(*dasd_erp_fn_t) (struct dasd_ccw_req *);
reply other threads:[~2004-04-21 14:54 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040421144732.GF2951@mschwid3.boeblingen.de.ibm.com \
--to=schwidefsky@de.ibm.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®