From: "Hemmann, Volker Armin" <volker.hemmann@heim9.tu-clausthal.de>
To: "Heilmann, Oliver" <Oliver.Heilmann@drkw.com>
Cc: linux-kernel@vger.kernel.org, akpm@osdl.org, davej@redhat.com,
oschoett@t-online.de
Subject: Re: [PATCH] SIS AGP vs 2.6.6-rc2
Date: Tue, 27 Apr 2004 19:29:16 +0200 [thread overview]
Message-ID: <200404271929.16786.volker.hemmann@heim9.tu-clausthal.de> (raw)
In-Reply-To: <1083063853.24569.88.camel@pandora>
[-- Attachment #1: Type: text/plain, Size: 616 bytes --]
Hi,
I tried your patch and is has rejects again:
energy linux # patch -p1 < sis.agp.patch
patching file drivers/char/agp/sis-agp.c
Hunk #1 succeeded at 13 with fuzz 2.
Hunk #2 succeeded at 69 with fuzz 2.
Hunk #3 FAILED at 96.
Hunk #4 FAILED at 224.
2 out of 5 hunks FAILED -- saving rejects to file
drivers/char/agp/sis-agp.c.rej
Attached is the .rej file.
Glück Auf
Volker
--
Conclusions
In a straight-up fight, the Empire squashes the Federation like a bug. Even
with its numerical advantage removed, the Empire would still squash the
Federation like a bug. Accept it. -Michael Wong
[-- Attachment #2: sis-agp.c.rej --]
[-- Type: text/x-diff, Size: 3954 bytes --]
***************
*** 94,106 ****
pci_write_config_dword(device, agp + PCI_AGP_COMMAND, command);
/*
- * Weird: on 648(fx) and 746(fx) chipsets any rate change in the target
* command register triggers a 5ms screwup during which the master
* cannot be configured
*/
- if (device->device == PCI_DEVICE_ID_SI_648 ||
- device->device == PCI_DEVICE_ID_SI_746) {
- printk(KERN_INFO PFX "SiS chipset with AGP problems detected. Giving bridge time to recover.\n");
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout (1+(HZ*10)/1000);
}
--- 96,107 ----
pci_write_config_dword(device, agp + PCI_AGP_COMMAND, command);
/*
+ * Weird: on some sis chipsets any rate change in the target
* command register triggers a 5ms screwup during which the master
* cannot be configured
*/
+ if (device->device == agp_bridge->dev->device) {
+ printk(KERN_INFO PFX "SiS delay workaround: giving bridge time to recover.\n");
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout (1+(HZ*10)/1000);
}
***************
*** 223,250 ****
};
static void __devinit sis_get_driver(struct agp_bridge_data *bridge)
{
- if (bridge->dev->device == PCI_DEVICE_ID_SI_648) {
- sis_driver.agp_enable=sis_648_enable;
- if (agp_bridge->major_version == 3) {
- sis_driver.aperture_sizes = agp3_generic_sizes;
- sis_driver.size_type = U16_APER_SIZE;
- sis_driver.num_aperture_sizes = AGP_GENERIC_SIZES_ENTRIES;
- sis_driver.configure = agp3_generic_configure;
- sis_driver.fetch_size = agp3_generic_fetch_size;
- sis_driver.cleanup = agp3_generic_cleanup;
- sis_driver.tlb_flush = agp3_generic_tlbflush;
- }
- }
- if (bridge->dev->device == PCI_DEVICE_ID_SI_746) {
- /*
- * We don't know enough about the 746 to enable it properly.
- * Though we do know that it needs the 'delay' hack to settle
- * after changing modes.
- */
- sis_driver.agp_enable=sis_648_enable;
}
}
--- 224,258 ----
};
+ // chipsets that require the 'delay hack'
+ static int sis_broken_chipsets[] __devinitdata = {
+ PCI_DEVICE_ID_SI_648,
+ PCI_DEVICE_ID_SI_746,
+ 0 // terminator
+ };
+
static void __devinit sis_get_driver(struct agp_bridge_data *bridge)
{
+ int i;
+ for(i=0; sis_broken_chipsets[i]!=0; ++i)
+ if(bridge->dev->device==sis_broken_chipsets[i])
+ break;
+
+ if(sis_broken_chipsets[i] || agp_sis_force_delay)
+ sis_driver.agp_enable=sis_delayed_enable;
+
+ // sis chipsets that indicate less than agp3.5
+ // are not actually fully agp3 compliant
+ if ((agp_bridge->major_version == 3 && agp_bridge->minor_version >= 5
+ && agp_sis_agp_spec!=0) || agp_sis_agp_spec==1) {
+ sis_driver.aperture_sizes = agp3_generic_sizes;
+ sis_driver.size_type = U16_APER_SIZE;
+ sis_driver.num_aperture_sizes = AGP_GENERIC_SIZES_ENTRIES;
+ sis_driver.configure = agp3_generic_configure;
+ sis_driver.fetch_size = agp3_generic_fetch_size;
+ sis_driver.cleanup = agp3_generic_cleanup;
+ sis_driver.tlb_flush = agp3_generic_tlbflush;
}
}
next prev parent reply other threads:[~2004-04-27 17:30 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20040426082159.90513.qmail@web10102.mail.yahoo.com>
2004-04-26 9:32 ` [PATCH] SIS AGP clean up, blacklist and module options Heilmann, Oliver
2004-04-27 11:04 ` [PATCH] SIS AGP vs 2.6.6-rc2 Heilmann, Oliver
2004-04-27 17:29 ` Hemmann, Volker Armin [this message]
2004-04-27 19:00 ` Heilmann, Oliver
2004-04-27 19:40 ` Heilmann, Oliver
2004-04-27 20:22 ` Hemmann, Volker Armin
2004-05-01 12:08 ` Crash in 2.6.6-rc3-mm1 (SiS/Radeon) Adrian Bunk
2004-05-04 8:41 ` Heilmann, Oliver
2004-05-31 0:42 ` Adrian Bunk
2004-05-07 23:08 [PATCH] SIS AGP vs 2.6.6-rc2 Cédric Rivard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200404271929.16786.volker.hemmann@heim9.tu-clausthal.de \
--to=volker.hemmann@heim9.tu-clausthal.de \
--cc=Oliver.Heilmann@drkw.com \
--cc=akpm@osdl.org \
--cc=davej@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oschoett@t-online.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®