From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263304AbUEKSxM (ORCPT ); Tue, 11 May 2004 14:53:12 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263370AbUEKSxM (ORCPT ); Tue, 11 May 2004 14:53:12 -0400 Received: from smtp1.poczta.onet.pl ([213.180.130.31]:43755 "EHLO smtp1.poczta.onet.pl") by vger.kernel.org with ESMTP id S263304AbUEKSxJ (ORCPT ); Tue, 11 May 2004 14:53:09 -0400 From: Marcin Garski Reply-To: garski@poczta.onet.pl To: linux-kernel@vger.kernel.org Subject: SiI3112 Serial ATA - no response on boot Date: Tue, 11 May 2004 20:52:44 +0200 User-Agent: KMail/1.6.2 MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: 7bit Message-Id: <200405112052.44979.garski@poczta.onet.pl> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org [Please CC me on replies, I am not subscribed to the list, thanks] Hi, I have a Abit NF7-S V2.0 mainboard (nForce2 chipset + SiI3112 SATA), with Seagate S-ATA connected to Sil3112. During boot i get following messages: SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0 SiI3112 Serial ATA: chipset revision 2 SiI3112 Serial ATA: 100% native mode on irq 11 ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio hde: ST380013AS, ATA DISK drive ide2 at 0xe083c080-0xe083c087,0xe083c08a on irq 11 hdg: no response (status = 0xfe) hdg: no response (status = 0xfe), resetting drive hdg: no response (status = 0xfe) Each "no response" message delays booting about 20 seconds. I don't have any device connected to hdg. I was wondering how to speed up booting, because this "hdg: no response (status = 0xfe), resetting drive" info is little irritating? I'm running on 2.6.6 kernel (on 2.6.4 this "no response" messages also appear). -- Best Regards Marcin Garski