From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265124AbUELQwN (ORCPT ); Wed, 12 May 2004 12:52:13 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265100AbUELQwN (ORCPT ); Wed, 12 May 2004 12:52:13 -0400 Received: from smtp4.poczta.onet.pl ([213.180.130.28]:63407 "EHLO smtp4.poczta.onet.pl") by vger.kernel.org with ESMTP id S265124AbUELQwJ (ORCPT ); Wed, 12 May 2004 12:52:09 -0400 From: Marcin Garski Reply-To: garski@poczta.onet.pl To: linux-kernel@vger.kernel.org Subject: Re: SiI3112 Serial ATA - no response on boot Date: Wed, 12 May 2004 18:51:42 +0200 User-Agent: KMail/1.6.2 References: <200405112052.44979.garski@poczta.onet.pl> <40A12409.40808@dotnetitalia.it> In-Reply-To: <40A12409.40808@dotnetitalia.it> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Message-Id: <200405121851.42401.garski@poczta.onet.pl> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org [Please CC me on replies, I am not subscribed to the list, thanks] Marco Adurno wrote: > I've got the same problem some time ago. > You have just to appen the string > hdg=none > in your boot loader config file Thanks, that's working. But isn't that a workaround for problem with probe (on NON SATA HDD probe don't generate such errors) that should be fixed somehow? > Marcin Garski wrote: > > > > Hi, > > > > I have a Abit NF7-S V2.0 mainboard (nForce2 chipset + SiI3112 > > SATA), with Seagate S-ATA connected to Sil3112. > > > > During boot i get following messages: > > SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0 > > SiI3112 Serial ATA: chipset revision 2 > > SiI3112 Serial ATA: 100% native mode on irq 11 > > ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio > > ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio > > hde: ST380013AS, ATA DISK drive > > ide2 at 0xe083c080-0xe083c087,0xe083c08a on irq 11 > > hdg: no response (status = 0xfe) > > hdg: no response (status = 0xfe), resetting drive > > hdg: no response (status = 0xfe) > > > > Each "no response" message delays booting about 20 seconds. > > I don't have any device connected to hdg. > > I was wondering how to speed up booting, because this "hdg: no > > response (status = 0xfe), resetting drive" info is little > > irritating? I'm running on 2.6.6 kernel (on 2.6.4 this "no > > response" messages also appear). -- Best Regards Marcin Garski