From: Martin Schwidefsky <schwidefsky@de.ibm.com>
To: akpm@osdl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] s390 (5/6): zfcp host adapter.
Date: Thu, 13 May 2004 21:15:19 +0200 [thread overview]
Message-ID: <20040513191519.GF2916@mschwid3.boeblingen.de.ibm.com> (raw)
[PATCH] s390: zfcp host adapter.
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
zfcp host adapter change:
- Prevent infinite retry of SCSI commands when FCP adapter is unavailable.
- Always queue error recovery structure to the error recovery running list.
- Add help text to zfcp config option.
diffstat:
drivers/s390/scsi/zfcp_ccw.c | 8 +++++++-
drivers/s390/scsi/zfcp_erp.c | 5 +++--
drivers/s390/scsi/zfcp_fsf.c | 4 ++--
drivers/scsi/Kconfig | 11 ++++++++++-
4 files changed, 22 insertions(+), 6 deletions(-)
diff -urN linux-2.6/drivers/s390/scsi/zfcp_ccw.c linux-2.6-s390/drivers/s390/scsi/zfcp_ccw.c
--- linux-2.6/drivers/s390/scsi/zfcp_ccw.c Mon May 10 04:32:26 2004
+++ linux-2.6-s390/drivers/s390/scsi/zfcp_ccw.c Thu May 13 21:01:04 2004
@@ -26,7 +26,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#define ZFCP_CCW_C_REVISION "$Revision: 1.52 $"
+#define ZFCP_CCW_C_REVISION "$Revision: 1.54 $"
#include <linux/init.h>
#include <linux/module.h>
@@ -232,14 +232,19 @@
case CIO_GONE:
ZFCP_LOG_NORMAL("adapter %s: device gone\n",
zfcp_get_busid_by_adapter(adapter));
+ debug_text_event(adapter->erp_dbf,1,"dev_gone");
+ zfcp_erp_adapter_shutdown(adapter, 0);
break;
case CIO_NO_PATH:
ZFCP_LOG_NORMAL("adapter %s: no path\n",
zfcp_get_busid_by_adapter(adapter));
+ debug_text_event(adapter->erp_dbf,1,"no_path");
+ zfcp_erp_adapter_shutdown(adapter, 0);
break;
case CIO_OPER:
ZFCP_LOG_NORMAL("adapter %s: operational again\n",
zfcp_get_busid_by_adapter(adapter));
+ debug_text_event(adapter->erp_dbf,1,"dev_oper");
zfcp_erp_modify_adapter_status(adapter,
ZFCP_STATUS_COMMON_RUNNING,
ZFCP_SET);
@@ -247,6 +252,7 @@
ZFCP_STATUS_COMMON_ERP_FAILED);
break;
}
+ zfcp_erp_wait(adapter);
up(&zfcp_data.config_sema);
return 1;
}
diff -urN linux-2.6/drivers/s390/scsi/zfcp_erp.c linux-2.6-s390/drivers/s390/scsi/zfcp_erp.c
--- linux-2.6/drivers/s390/scsi/zfcp_erp.c Mon May 10 04:32:02 2004
+++ linux-2.6-s390/drivers/s390/scsi/zfcp_erp.c Thu May 13 21:01:04 2004
@@ -31,7 +31,7 @@
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_ERP
/* this drivers version (do not edit !!! generated and updated by cvs) */
-#define ZFCP_ERP_REVISION "$Revision: 1.51 $"
+#define ZFCP_ERP_REVISION "$Revision: 1.52 $"
#include "zfcp_ext.h"
@@ -2540,6 +2540,7 @@
atomic_clear_mask(ZFCP_STATUS_ADAPTER_HOST_CON_INIT,
&adapter->status);
ZFCP_LOG_DEBUG("Doing exchange config data\n");
+ zfcp_erp_action_to_running(erp_action);
zfcp_erp_timeout_init(erp_action);
if (zfcp_fsf_exchange_config_data(erp_action)) {
retval = ZFCP_ERP_FAILED;
@@ -2566,7 +2567,7 @@
* _must_ be the one belonging to the 'exchange config
* data' request.
*/
- down_interruptible(&adapter->erp_ready_sem);
+ down(&adapter->erp_ready_sem);
if (erp_action->status & ZFCP_STATUS_ERP_TIMEDOUT) {
ZFCP_LOG_INFO("error: exchange of configuration data "
"for adapter %s timed out\n",
diff -urN linux-2.6/drivers/s390/scsi/zfcp_fsf.c linux-2.6-s390/drivers/s390/scsi/zfcp_fsf.c
--- linux-2.6/drivers/s390/scsi/zfcp_fsf.c Mon May 10 04:32:54 2004
+++ linux-2.6-s390/drivers/s390/scsi/zfcp_fsf.c Thu May 13 21:01:04 2004
@@ -29,7 +29,7 @@
*/
/* this drivers version (do not edit !!! generated and updated by cvs) */
-#define ZFCP_FSF_C_REVISION "$Revision: 1.45 $"
+#define ZFCP_FSF_C_REVISION "$Revision: 1.46 $"
#include "zfcp_ext.h"
@@ -412,7 +412,7 @@
fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR;
atomic_set_mask(ZFCP_STATUS_ADAPTER_HOST_CON_INIT,
&(adapter->status));
- debug_text_event(adapter->erp_dbf, 4, "prot_con_init");
+ debug_text_event(adapter->erp_dbf, 3, "prot_con_init");
break;
case FSF_PROT_DUPLICATE_REQUEST_ID:
diff -urN linux-2.6/drivers/scsi/Kconfig linux-2.6-s390/drivers/scsi/Kconfig
--- linux-2.6/drivers/scsi/Kconfig Thu May 13 21:00:43 2004
+++ linux-2.6-s390/drivers/scsi/Kconfig Thu May 13 21:01:04 2004
@@ -1736,8 +1736,17 @@
# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
config ZFCP
- tristate "IBM z900 OpenFCP/SCSI support"
+ tristate "FCP host bus adapter driver for IBM eServer zSeries"
depends on ARCH_S390 && SCSI
+ help
+ If you want to access SCSI devices attached to your IBM eServer
+ zSeries by means of Fibre Channel interfaces say Y.
+ For details please refer to the documentation provided by IBM at
+ <http://oss.software.ibm.com/developerworks/opensource/linux390>
+
+ This driver is also available as a module. This module will be
+ called zfcp. If you want to compile it as a module, say M here
+ and read Documentation/modules.txt.
endmenu
next reply other threads:[~2004-05-13 19:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-13 19:15 Martin Schwidefsky [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-04-28 16:50 Martin Schwidefsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040513191519.GF2916@mschwid3.boeblingen.de.ibm.com \
--to=schwidefsky@de.ibm.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®