From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner+willy=40w.ods.org-S261159AbUEQMdN@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S261159AbUEQMdN (ORCPT <rfc822;willy@w.ods.org>);
	Mon, 17 May 2004 08:33:13 -0400
Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261156AbUEQMdN
	(ORCPT <rfc822;linux-kernel-outgoing>);
	Mon, 17 May 2004 08:33:13 -0400
Received: from mion.elka.pw.edu.pl ([194.29.160.35]:35725 "EHLO
	mion.elka.pw.edu.pl") by vger.kernel.org with ESMTP id S261162AbUEQMdL
	(ORCPT <rfc822;linux-kernel@vger.kernel.org>);
	Mon, 17 May 2004 08:33:11 -0400
From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
To: Mike Kordik <Mike@Kordik.net>
Subject: Re: HDIO_SET_DMA failed: with nforce2 board
Date: Mon, 17 May 2004 14:34:24 +0200
User-Agent: KMail/1.5.3
Cc: linux-kernel@vger.kernel.org
References: <pan.2004.05.17.02.15.01.317598@kordik.net> <200405171313.02675.bzolnier@elka.pw.edu.pl> <1084793981.12242.1.camel@Jacob>
In-Reply-To: <1084793981.12242.1.camel@Jacob>
MIME-Version: 1.0
Content-Type: text/plain;
  charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Message-Id: <200405171434.24417.bzolnier@elka.pw.edu.pl>
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org

On Monday 17 of May 2004 13:39, Mike Kordik wrote:
> On Mon, 2004-05-17 at 07:13, Bartlomiej Zolnierkiewicz wrote:
> > On Monday 17 of May 2004 04:15, Mike wrote:
> > > I have an nforce2 based board and I cannot enable dma.
> >
> > 'dmesg' output, please
>
> I posted using PAN and I am trying to respond with PAM but todays posts
> and some of yesterdays are not showing up. I do not know what the
> problem is but I apologize for responding this way. Here is my dmesg
> output:

OK, thanks.

> Linux version 2.6.4-rc1-mm1 (root@cdimage) (gcc version 3.3.3 20040217
> (Gentoo Linux 3.3.3, propolice-3.3-7)) #3 Mon May 17 00:17:40 EDT 2004

...

> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> pnp: the driver 'ide' has been registered
> hda: Maxtor 6Y120L0, ATA DISK drive
> hdb: WDC WD1600BB-00HTA0, ATA DISK drive
> hdc: MATSHITADVD-ROM SR-8582, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15

AMD/nVidia IDE driver didn't recognize the controller
(or driver wasn't compiled in for some reason).

I need full .config and 'lspci -vvv' output to know more.

Bartlomiej