From: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>
To: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: [patch 2.6] don't put IDE disks in standby mode on halt on Alpha
Date: Thu, 27 May 2004 18:54:21 +0200 [thread overview]
Message-ID: <200405271854.21499.bzolnier@elka.pw.edu.pl> (raw)
In-Reply-To: <20040527194920.A1709@jurassic.park.msu.ru>
On Thursday 27 of May 2004 17:49, Ivan Kokshaysky wrote:
> Spinning the disks down across a 'halt' on Alpha is even
> worse than doing that on reboot on i386 (assuming the
> boot device is IDE disk).
> Typically, the sequence to boot another kernel is:
> # halt
> kernel shuts down, firmware re-initializes,
> then on firmware prompt we type something like
>
> >>> boot -file new_kernel_image.gz
How is it different from reboot?
[ I don't know much about alpha. ]
> Unfortunately, the firmware does not expect the IDE drive
> to be in standby mode and reports 'bootstrap failure' on
> the first and all subsequent boot attempts until the
> drive spins up, which is extremely annoying and
> confuses users a lot.
So how does it work in 2.4?
> This patch allows architectures override the default
> behavior (don't spin the disks down on reboot only)
> in asm/ide.h.
No more <asm/ide.h> crap, please.
> Ivan.
>
> --- 2.6/drivers/ide/ide-disk.c Fri May 21 21:06:12 2004
> +++ linux/drivers/ide/ide-disk.c Fri May 21 21:48:09 2004
> @@ -1723,7 +1723,7 @@ static void ide_device_shutdown(struct d
> {
> ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
>
> - if (system_state == SYSTEM_RESTART) {
> + if (ide_shutdown_omit_standby(system_state)) {
> ide_cacheflush_p(drive);
> return;
> }
> --- 2.6/include/linux/ide.h Fri May 21 21:47:13 2004
> +++ linux/include/linux/ide.h Fri May 21 21:48:09 2004
> @@ -1709,4 +1709,8 @@ static inline int ata_can_queue(ide_driv
>
> extern struct bus_type ide_bus_type;
>
> +#ifndef ide_shutdown_omit_standby
> +#define ide_shutdown_omit_standby(sys_state) (sys_state == SYSTEM_RESTART)
> +#endif
> +
> #endif /* _IDE_H */
> --- 2.6/include/asm-alpha/ide.h Fri May 21 21:47:54 2004
> +++ linux/include/asm-alpha/ide.h Fri May 21 21:48:34 2004
> @@ -52,6 +52,8 @@ static inline unsigned long ide_default_
> #define ide_init_default_irq(base) ide_default_irq(base)
> #endif
>
> +#define ide_shutdown_omit_standby(sys_state) (sys_state !=
> SYSTEM_POWER_OFF) +
> #include <asm-generic/ide_iops.h>
>
> #endif /* __KERNEL__ */
next prev parent reply other threads:[~2004-05-27 17:02 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-27 15:49 Ivan Kokshaysky
2004-05-27 16:26 ` Arjan van de Ven
2004-05-27 17:11 ` Ivan Kokshaysky
2004-05-27 17:12 ` Arjan van de Ven
2004-05-27 17:41 ` Miquel van Smoorenburg
2004-05-27 16:54 ` Bartlomiej Zolnierkiewicz [this message]
2004-05-27 17:08 ` Ivan Kokshaysky
2004-05-27 17:40 ` Bartlomiej Zolnierkiewicz
2004-05-28 15:10 ` Ivan Kokshaysky
2004-05-28 15:40 ` Bartlomiej Zolnierkiewicz
2004-05-28 21:37 ` Ivan Kokshaysky
2004-05-29 18:07 ` Bartlomiej Zolnierkiewicz
2004-05-28 10:34 ` Mark McClelland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200405271854.21499.bzolnier@elka.pw.edu.pl \
--to=b.zolnierkiewicz@elka.pw.edu.pl \
--cc=akpm@osdl.org \
--cc=ink@jurassic.park.msu.ru \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®