From: "Pokey the Penguin" <pokey@linuxmail.org>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] psmouse/usb interaction fix
Date: Tue, 01 Jun 2004 01:40:10 +0800 [thread overview]
Message-ID: <20040531174012.BA07D2B2B58@ws5-7.us4.outblaze.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 759 bytes --]
This patch fixes the case where certain laptop touchpads (ALPS)
are disabled if the machine boots with a usb mouse plugged in.
Without it, users have to choose between using either a usb mouse
or the touchpad. With it, any combination is possible and the usb
mouse can be attached/removed at runtime without breaking the
touchpad.
The patch is ported from a SuSE kernel to 2.6.7-rc2. It's been
around for at least two minor releases. The maintainer was
contacted regarding merging but failed to respond.
Patch vital to certain laptop users. Please apply.
--
______________________________________________
Check out the latest SMS services @ http://www.linuxmail.org
This allows you to send and receive SMS through your mailbox.
Powered by Outblaze
[-- Attachment #2: psmouse-usb-fix-2.6.7-rc2.diff --]
[-- Type: application/octet-stream, Size: 2484 bytes --]
--- linux-2.6.7-rc2-base/drivers/pci/quirks.c 2004-05-31 18:08:55.310606000 +0100
+++ linux-2.6.7-rc2/drivers/pci/quirks.c 2004-05-31 18:18:48.648404952 +0100
@@ -875,6 +875,66 @@ static void __devinit quirk_pciehp_msi(s
pciehp_msi_quirk = 1;
}
+
+#define UHCI_USBLEGSUP 0xc0 /* legacy support */
+#define UHCI_USBCMD 0 /* command register */
+#define UHCI_USBINTR 4 /* interrupt register */
+#define UHCI_USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
+#define UHCI_USBCMD_GRESET 0x0004 /* Global reset */
+
+#define OHCI_CONTROL 0x04
+#define OHCI_CMDSTATUS 0x08
+#define OHCI_INTRENABLE 0x10
+#define OHCI_OCR (1 << 3) /* ownership change request */
+#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
+#define OHCI_INTR_OC (1 << 30) /* ownership change */
+
+static void __init quirk_usb_disable_smm_bios(struct pci_dev *pdev)
+{
+
+ if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x00)) { /* UHCI */
+ int i;
+ unsigned long base = 0;;
+
+ for (i = 0; i < PCI_ROM_RESOURCE; i++)
+ if ((pci_resource_flags(pdev, i) & IORESOURCE_IO)) {
+ base = pci_resource_start(pdev, i);
+ break;
+ }
+
+ if (!base)
+ return;
+
+ outw(0, base + UHCI_USBINTR);
+ outw(UHCI_USBCMD_GRESET, base + UHCI_USBCMD);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((HZ*50+999) / 1000);
+ outw(0, base + UHCI_USBCMD);
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout((HZ*10+999) / 1000);
+
+ pci_write_config_word(pdev, UHCI_USBLEGSUP, UHCI_USBLEGSUP_DEFAULT);
+ }
+
+ if (pdev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10)) { /* OHCI */
+ char *base = ioremap_nocache(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (base == NULL) return;
+
+ if (readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ int temp = 500; /* arbitrary: five seconds */
+ writel(OHCI_INTR_OC, base + OHCI_INTRENABLE);
+ writel(OHCI_OCR, base + OHCI_CMDSTATUS);
+ while (temp && readl(base + OHCI_CONTROL) & OHCI_CTRL_IR) {
+ temp--;
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout( HZ / 100);
+ }
+ }
+ iounmap(base);
+ }
+}
+
/*
* The main table of quirks.
*
@@ -1002,6 +1062,8 @@ static struct pci_fixup pci_fixups[] __d
quirk_intel_ide_combined },
#endif /* CONFIG_SCSI_SATA */
+ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, quirk_usb_disable_smm_bios },
+
{ PCI_FIXUP_FINAL, PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SMCH, quirk_pciehp_msi },
{ 0 }
next reply other threads:[~2004-05-31 17:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-05-31 17:40 Pokey the Penguin [this message]
2004-05-31 18:03 ` Greg KH
2004-05-31 20:01 ` Vojtech Pavlik
2004-06-04 20:30 ` Greg KH
2004-06-05 9:18 ` Vojtech Pavlik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040531174012.BA07D2B2B58@ws5-7.us4.outblaze.com \
--to=pokey@linuxmail.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®