[PATCH] IDE update for 2.6.7-rc3 [10/12]

[Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl>]

[PATCH] ide: tiny task_mulout_intr() (CONFIG_IDE_TASKFILE_IO=n) cleanup

- merge status checking code for rq->current_nr_sectors
  and !rq->current_nr_sectors cases
- remove !rq->bio check as it is always true

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

 linux-2.6.7-rc3-bzolnier/drivers/ide/ide-taskfile.c |   19 ++++---------------
 1 files changed, 4 insertions(+), 15 deletions(-)

diff -puN drivers/ide/ide-taskfile.c~ide_task_mulout_intr drivers/ide/ide-taskfile.c
--- linux-2.6.7-rc3/drivers/ide/ide-taskfile.c~ide_task_mulout_intr	2004-06-10 23:15:19.927432736 +0200
+++ linux-2.6.7-rc3-bzolnier/drivers/ide/ide-taskfile.c	2004-06-10 23:15:19.931432128 +0200
@@ -505,29 +505,18 @@ ide_startstop_t task_mulout_intr (ide_dr
 	u8 stat				= hwif->INB(IDE_STATUS_REG);
 	struct request *rq		= HWGROUP(drive)->rq;
 	char *pBuf			= NULL;
-	ide_startstop_t startstop	= ide_stopped;
 	unsigned int msect		= drive->mult_count;
 	unsigned int nsect;
 	unsigned long flags;
 
-	/*
-	 * (ks/hs): Handle last IRQ on multi-sector transfer,
-	 * occurs after all data was sent in this chunk
-	 */
-	if (rq->current_nr_sectors == 0) {
+	if (!OK_STAT(stat, DATA_READY, BAD_R_STAT) || !rq->current_nr_sectors) {
 		if (stat & (ERR_STAT|DRQ_STAT)) {
 			return DRIVER(drive)->error(drive, "task_mulout_intr", stat);
 		}
-		if (!rq->bio)
+		/* Handle last IRQ, occurs after all data was sent. */
+		if (!rq->current_nr_sectors) {
 			DRIVER(drive)->end_request(drive, 1, 0);
-		return startstop;
-	}
-	/*
-	 * DON'T be lazy code the above and below togather !!!
-	 */
-	if (!OK_STAT(stat,DATA_READY,BAD_R_STAT)) {
-		if (stat & (ERR_STAT|DRQ_STAT)) {
-			return DRIVER(drive)->error(drive, "task_mulout_intr", stat);
+			return ide_stopped;
 		}
 		/* no data yet, so wait for another interrupt */
 		if (HWGROUP(drive)->handler == NULL)

_