From: Andre Costa <costa@tecgraf.puc-rio.br>
To: linux-kernel@vger.kernel.org
Subject: 2.4.26: IDE drives become unavailable randomly
Date: Wed, 30 Jun 2004 08:41:42 -0300 [thread overview]
Message-ID: <20040630084142.10a3598b.costa@tecgraf.puc-rio.br> (raw)
(please cc me on any replies, because I am not subscribed to this list;
if I do need to subscribe, just let me know)
Hi,
I am using 2.4.26 SMP on a ABIT AT7 mobo, with a 2.8GHz P4 processor
with hyper-threading enabled. I have one 80GB Seagate IDE disk
as /dev/hda, and from time to time it seems to "disappear", usually
after these messages appear a couple of trimes on/var/log/messages:
Jun 27 17:15:00 dali kernel: hda: status timeout: status=0x80 { Busy }
Jun 27 17:15:00 dali kernel:
Jun 27 17:15:00 dali kernel: hda: drive not ready for command
Jun 27 17:15:03 dali kernel: ide0: reset: success
I already had some ide-related issues, namely the one mentioned here:
http://www.x86-64.org/lists/discuss/msg04679.html
Due to that, I am booting with:
hdc=ide-scsi apm=off acpi=ht noapic
Turning off APIC and keeping ACPI to a minimum seems to have fixed the
"dma status == 0x24" problem, but I still experience the "status
timeout" above, which is very frustrating because this is supposed to be
a server for our intranet.
I tried turning off APM for this disk with 'hdparm -B255 /dev/hda', but
it didn't work:
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
I have turned off spindown with 'hdparm -S0 /dev/hda', but frankly I am
not sure this will help (besides being bad for harddisk lifetime).
So, given this scenario, I would really appreciate any suggestions on
how to workaround this issue... Please, let me know if you need
additional info. I am attaching below the output of 'hdparm -I /dev/hda'
in case it helps. I am running Fedora Core 1.
TIA
Andre
-------- output of 'hdparm -I /dev/hda' --------
/dev/hda:
ATA device, with non-removable media
Model Number: ST380011A
Serial Number: 3JV78385
Firmware Revision: 3.06
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 2
Supported: 6 5 4 3
Configuration:
Logical max current
cylinders 16383 65535
heads 16 1
sectors/track 63 63
--
CHS current addressable sectors: 4128705
LBA user addressable sectors: 156301488
LBA48 user addressable sectors: 156301488
device size with M = 1024*1024: 76319 MBytes
device size with M = 1000*1000: 80026 MBytes (80 GB)
Capabilities:
LBA, IORDY(can be disabled)
bytes avail on r/w long: 4 Queue depth: 1
Standby timer values: spec'd by Standard
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=240ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* Look-ahead
* Write cache
* Power Management feature set
Security Mode feature set
* SMART feature set
* FLUSH CACHE EXT command
* Mandatory FLUSH CACHE command
* Device Configuration Overlay feature set
* 48-bit Address feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
* SMART self-test
* SMART error logging
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
--
Andre Oliveira da Costa
(costa@tecgraf.puc-rio.br)
next reply other threads:[~2004-06-30 11:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-30 11:41 Andre Costa [this message]
2004-06-30 13:59 ` tom st denis
2004-06-30 14:51 ` Andre Costa
2004-06-30 15:18 Nick Warne
2004-07-01 9:48 ` Bruce Allen
2004-07-01 10:49 ` Andre Costa
2004-07-01 18:43 ` Nick Warne
2004-07-01 19:03 ` Andre Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040630084142.10a3598b.costa@tecgraf.puc-rio.br \
--to=costa@tecgraf.puc-rio.br \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®