Linux version 2.6.7-mm5 (root@venkman) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #7 Thu Jul 1 00:48:38 ART 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.1 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f7e90 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Built 1 zonelists Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 Kernel command line: vga=0x030c quiet PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1000.205 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 132x60 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 516416k/524224k available (1180k kernel code, 7056k reserved, 597k data, 116k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1970.17 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 999.0854 MHz. ..... host bus clock speed is 133.0313 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040615 ACPI: IRQ5 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbec0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbee8, dseg 0xf0000 PnPBIOS: 11 nodes reported by PnP BIOS; 11 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API PCI: Disabling Via external APIC routing pci_hotplug: PCI Hot Plug PCI Core version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found RAMDISK driver initialized: 16 RAM disks of 2048K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio hda: SAMSUNG CD-R/RW DRIVE SW-208F, ATAPI CD/DVD-ROM drive hdb: Pioneer DVD-ROM ATAPIModel DVD-114 0124, ATAPI CD/DVD-ROM drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: QUANTUM FIREBALLP AS20.5, ATA DISK drive hdd: ST330630A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 40132503 sectors (20547 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(100) hdc: cache flushes supported /dev/ide/host0/bus1/target0/lun0: p1 < p5 p6 p7 p8 p9 p10 > hdd: max request size: 128KiB hdd: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=59303/16/63, UDMA(66) hdd: cache flushes supported /dev/ide/host0/bus1/target1/lun0: p1 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) ReiserFS: hdc9: found reiserfs format "3.6" with standard journal ReiserFS: hdc9: using ordered data mode ReiserFS: hdc9: journal params: device hdc9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc9: checking transaction log (hdc9) ReiserFS: hdc9: replayed 6 transactions in 0 seconds ReiserFS: hdc9: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 116k freed NET: Registered protocol family 1 Adding 265032k swap on /dev/discs/disc0/part6. Priority:-1 extents:1 ReiserFS: hdc9: Removing [5769 811 0x0 SD]..done ReiserFS: hdc9: There were 1 uncompleted unlinks/truncates. Completed SCSI subsystem initialized hda: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI DVD-ROM drive, 512kB Cache, UDMA(33) serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: irq 10, io base 0000d400 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usbcore: registered new driver usbmouse drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver mice: PS/2 mouse device common for all mice md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: raid0 personality registered as nr 2 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 usb 1-1: new full speed USB device using address 2 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected md: raidstart(pid 5180) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6 md: autorun ... md: considering hdc10 ... md: adding hdc10 ... md: adding hdd1 ... md: created md0 md: bind md: bind md: running: md0: setting max_sectors to 64, segment boundary to 16383 raid0: looking at hdc10 raid0: comparing hdc10(17470592) with hdc10(17470592) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hdd1 raid0: comparing hdd1(29880768) with hdc10(17470592) raid0: NOT EQUAL raid0: comparing hdd1(29880768) with hdd1(29880768) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 1 raid0: checking hdd1 ... contained as device 0 (29880768) is smallest!. raid0: checking hdc10 ... nope. raid0: zone->nb_dev: 1, size: 12410176 raid0: current zone offset: 29880768 raid0: done. raid0 : md_size is 47351360 blocks. raid0 : conf->hash_spacing is 34941184 blocks. raid0 : nb_zone is 2. raid0 : Allocating 8 bytes for hash. md: ... autorun DONE. usb 1-2: new full speed USB device using address 3 ReiserFS: hdc7: found reiserfs format "3.6" with standard journal ReiserFS: hdc7: using ordered data mode ReiserFS: hdc7: journal params: device hdc7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc7: checking transaction log (hdc7) ReiserFS: hdc7: Using r5 hash to sort names ReiserFS: hdc8: found reiserfs format "3.6" with standard journal ReiserFS: hdc8: using ordered data mode ReiserFS: hdc8: journal params: device hdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc8: checking transaction log (hdc8) ReiserFS: hdc8: Using r5 hash to sort names SGI XFS with ACLs, security attributes, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem md0 usb 1-1.2: new low speed USB device using address 4 input: Microsoft Microsoft IntelliMouse® Explorer on usb-0000:00:07.2-1.2 usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Ending clean XFS mount for filesystem: md0 Real Time Clock Driver v1.12 hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hdc: drive not ready for command hdc: CHECK for good STATUS 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 12 (level, low) -> IRQ 12 eth0: RealTek RTL8139 at 0xdc00, 00:e0:7d:9f:1f:90, IRQ 12 eth0: Identified 8139 chip type 'RTL-8139C' NET: Registered protocol family 17 eth0: link up, 10Mbps, half-duplex, lpa 0x0000 nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004 Linux agpgart interface v0.100 (c) Dave Jones 0: NVRM: AGPGART: unable to retrieve symbol table inserting floppy driver for 2.6.7-mm5 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 nfs warning: mount version older than kernel Linux video capture interface: v1.00 /usr/src/ov511-2.27/ovcamchip_core.c: v2.27 : OV camera chip I2C driver /usr/src/ov511-2.27/ov511_core.c: USB OV511+ video device found /usr/src/ov511-2.27/ov511_core.c: model: Creative Labs WebCam 3 (id=21) /usr/src/ov511-2.27/ovcamchip_core.c: Camera chip is an OV7620 /usr/src/ov511-2.27/ov511_core.c: Device at usb-0000:00:07.2-2 registered to minor 0 usbcore: registered new driver ov511 /usr/src/ov511-2.27/ov511_core.c: v2.27 : ov511 USB Camera Driver (V4L2 disabled)