From: John M Flinchbaugh <glynis@butterfly.hjsoft.com>
To: linux-kernel@vger.kernel.org
Subject: 2.6.7 oops in usb hotplugging (hiddev/cpia_usb)
Date: Wed, 7 Jul 2004 02:08:08 -0400 [thread overview]
Message-ID: <20040707060808.GA6435@butterfly.hjsoft.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 5081 bytes --]
i boot up without my cpia_usb camera plugged in. when i plug
it in, the modprobe hangs, and i see this error in dmesg:
---
hub 1-1:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
usb 1-1.1: USB disconnect, address 4
usb 1-1.1: usb_disable_device nuking all URBs
ohci_hcd 0000:00:07.4: shutdown urb de607ad8 pipe 40408480 ep1in-intr
usb 1-1.1: unregistering interface 1-1.1:1.0
usb 1-1.1:1.0: hotplug
usb 1-1.1: unregistering device
usb 1-1.1: hotplug
hub 1-1:1.0: debounce: port 1: delay 100ms stable 4 status 0x301
usb 1-1.1: new low speed USB device using address 7
usb 1-1.1: skipped 1 descriptor after interface
usb 1-1.1: new device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-1.1: default language 0x0409
usb 1-1.1: Product: Back-UPS RS 1000 FW:7.g5 .D USB FW:g5
usb 1-1.1: Manufacturer: American Power Conversion
usb 1-1.1: SerialNumber: BB0100009999
usb 1-1.1: hotplug
usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
usb 1-1.1:1.0: hotplug
usbhid 1-1.1:1.0: usb_probe_interface
usbhid 1-1.1:1.0: usb_probe_interface - got id
Unable to handle kernel paging request at virtual address 2023f8fc
printing eip:
e0e46c34
*pde = 00000000
Oops: 0002 [#1]
SMP
Modules linked in: nfsd exportfs lockd sunrpc parport_pc lp parport autofs4 capability commoncap ipt_REJECT iptable_filter iptable_nat ip_conntrack ip_tables md5 ipv6 af_packet sr_mod cdrom usb_storage usbhid snd_ens1371 snd_rawmidi snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_timer snd_ac97_codec snd soundcore ohci1394 ieee1394 ne2k_pci 8390 crc32 ohci_hcd usbcore amd74xx ide_core amd_k7_agp agpgart sg 3c59x psmouse
CPU: 1
EIP: 0060:[<e0e46c34>] Not tainted
EFLAGS: 00010246 (2.6.7)
EIP is at hiddev_cleanup+0x14/0x40 [usbhid]
eax: cfcfcfcf ebx: df43e9c8 ecx: de356e0c edx: e0e4b61c
esi: df43e9e0 edi: de356800 ebp: de6dcf78 esp: de6dcf74
ds: 007b es: 007b ss: 0068
Process apcupsd (pid: 2216, threadinfo=de6dc000 task=df1258f0)
Stack: df43e9c8 de6dcf8c e0e46ce8 dec287e0 dffb00a0 de231e20 de6dcfa4 c01565fe
df7e8a64 dec287e0 00000000 dfb186c0 de6dcfbc c0154e6f 00000000 00000004
0000000a 0808a7d0 de6dc000 c0104e33 00000004 00000000 08084018 0000000a
Call Trace:
[<c0105c0a>] show_stack+0x7a/0x90
[<c0105d97>] show_registers+0x157/0x1b0
[<c0105f1c>] die+0x8c/0x100
[<c0115f23>] do_page_fault+0x253/0x50f
[<c010589d>] error_code+0x2d/0x38
[<e0e46ce8>] hiddev_release+0x88/0x90 [usbhid]
[<c01565fe>] __fput+0xfe/0x110
[<c0154e6f>] filp_close+0x4f/0x80
[<c0104e33>] syscall_call+0x7/0xb
Code: c7 04 85 c0 b9 e4 e0 00 00 00 00 8b 43 14 8b 80 48 0c 00 00
<7>drivers/usb/core/file.c: looking for a minor, starting at 0
hiddev1: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g5 .D USB FW:g5] on usb-0000:00:07.4-1.1
hub 1-1:1.0: 312mA power budget left
hub 1-1:1.0: port 4, status 0101, change 0001, 12 Mb/s
hub 1-1:1.0: debounce: port 4: delay 100ms stable 4 status 0x101
hub 1-1:1.0: port 4 not reset yet, waiting 10ms
usb 1-1.4: new full speed USB device using address 8
usb 1-1.4: new device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.4: default language 0x0409
usb 1-1.4: Product: USB Camera
usb 1-1.4: hotplug
usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0)
usb 1-1.4:1.0: hotplug
hub 1-1:1.0: 212mA power budget left
Linux video capture interface: v1.00
V4L-Driver for Vision CPiA based cameras v1.2.3
---
hanging modprobe:
---
root 4933 4906 0 01:56 ? 00:00:00 /sbin/modprobe -s -q cpia_usb
root 4935 4934 0 01:56 ? 00:00:00 /sbin/modprobe -q -- cpia_usb
glynis 5167 4208 0 01:59 tty1 00:00:00 grep modprobe
---
ver_linux:
---
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux butterfly 2.6.7 #1 SMP Tue Jul 6 23:30:14 EDT 2004 i686 GNU/Linux
Gnu C 3.3.4
Gnu make 3.80
binutils 2.14.90.0.7
util-linux 2.12
mount 2.12
module-init-tools 3.1-pre4
e2fsprogs 1.35
quota-tools 3.12.
nfs-utils 1.0.6
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.2.1
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.0.91
Modules Loaded cpia videodev nfsd exportfs lockd sunrpc parport_pc lp parport autofs4 capability commoncap ipt_REJECT iptable_filter iptable_nat ip_conntrack ip_tables md5 ipv6 af_packet sr_mod cdrom usb_storage usbhid snd_ens1371 snd_rawmidi snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_timer snd_ac97_codec snd soundcore ohci1394 ieee1394 ne2k_pci 8390 crc32 ohci_hcd usbcore amd74xx ide_core amd_k7_agp agpgart sg 3c59x psmouse
---
--
____________________}John Flinchbaugh{______________________
| glynis@hjsoft.com http://www.hjsoft.com/~glynis/ |
~~Powered by Linux: Reboots are for hardware upgrades only~~
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
reply other threads:[~2004-07-07 6:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040707060808.GA6435@butterfly.hjsoft.com \
--to=glynis@butterfly.hjsoft.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®