Re: 2.6.7-mm7 ide errors

["Eric D. Mudama" <edmudama@bounceswoosh.org>]

On Sat, Jul 10 at  8:48, Ed Tomlinson wrote:
>Hi,
>
>The ide error introduced with the barrier patches are still happening here with mm7. 
>
>Jul 10 08:06:04 bert usb.agent[1705]:      usbhid: loaded successfully
>Jul 10 08:06:04 bert input.agent[1738]:      joydev: loaded successfully
>Jul 10 08:06:06 bert kernel: lp: driver loaded but no devices found
>Jul 10 08:06:16 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
>Jul 10 08:06:16 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
>Jul 10 08:06:16 bert kernel: ide: failed opcode was: 0xe7
>Jul 10 08:06:18 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
>Jul 10 08:06:18 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError }
>Jul 10 08:06:18 bert kernel: ide: failed opcode was: 0xe7
>
>Typically  I get one of the above every couple of minutes and have since the barrier changes
>when into mm.
>
>What can I do to help get to the bottom of this problem?

0xE7 is the 'FLUSH CACHE' command for use on drives <= 137GB.

What model of drive do you have, and how big is it?


-- 
Eric D. Mudama
edmudama@mail.bounceswoosh.org