Re: partitionable md devices and partition detection

[Georgi Georgiev <chutz@gg3.net>]

> So the fact that it works for me is a freak accident?
> 
> I have this in lilo.conf:
> 
> append="md=d0,/dev/sda,/dev/sdb root=/dev/md_d0p1 "
> 
> and this is dmesg:
> 
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> md: Loading md_d0: /dev/sda
> md: bind<sda>
> md: bind<sdb>
> raid1: raid set md_d0 active with 2 out of 2 mirrors
>  md_d0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.

I guess my problem (and not only mine it seems) is here:

md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
md: Loading md_d0: /dev/hda
md: bind<hda>
md: bind<sda>
raid1: raid set md_d0 active with 2 out of 2 mirrors
 md_d0: unknown partition table

Why the unknown partition table? It does work fine once I complete booting.
This is with 2.6.7.

Don't pay attention to the hda,sda -- I was using vmware for the tests.

Sorry if I break the thread, but I had trouble finding the proper message to
reply to.

-- 
|    Georgi Georgiev   |  When you have eliminated the impossible,     |
|     chutz@gg3.net    |  whatever remains, however improbable, must   |
|   +81(90)6266-1163   |  be the truth. -- Sherlock Holmes, "The       |
|  ------------------- |  Sign of Four"                                |