From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S266667AbUGVLUJ (ORCPT ); Thu, 22 Jul 2004 07:20:09 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S266674AbUGVLUJ (ORCPT ); Thu, 22 Jul 2004 07:20:09 -0400 Received: from madrid10.amenworld.com ([62.193.203.32]:53775 "EHLO madrid10.amenworld.com") by vger.kernel.org with ESMTP id S266667AbUGVLUD (ORCPT ); Thu, 22 Jul 2004 07:20:03 -0400 Date: Thu, 22 Jul 2004 13:20:56 +0200 From: DervishD To: Eva Dominguez Cc: linux-kernel@vger.kernel.org Subject: Re: aditional parallel port problems Message-ID: <20040722112056.GD6148@DervishD> Mail-Followup-To: Eva Dominguez , linux-kernel@vger.kernel.org References: <20040722090106.36880.qmail@web21110.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <20040722090106.36880.qmail@web21110.mail.yahoo.com> User-Agent: Mutt/1.4.2.1i Organization: Pleyades Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi Eva :) * Eva Dominguez dixit: > 5. The command "dmesg | grep parport" displays: > > "parport0: PC-style at 0x378 irq 7 [PCSPP, > TRISTATE, EPP]" (Is this line telling me the mode of > the parallel port?? in this case...what does it mean?) > "parport1: PC-style at 0x8800 irq 5 [PCSPP, > TRISTATE, EPP]" > "lp0: using parport0 (interrupt-driven)" > "lp1: using parport1 (polling)" Here I have many VIA chipset PC's, and all of them show the same problem: the SPP and EPP modes are detected (but only if I give the proper options, otherwise only SPP works), and ECP is not detected. The problem is longer to explain properly, but that's more or less. I cannot help you (by now...), but I'm trying to isolate and solve my problem with the help of Dino Klein, and as soon as I have something, I can contact you. Anyway, your card seems to be 'moded' through software, am I wrong?, so maybe it should work providing in the module options the io_hi value for the card, so the ECR registers are accessed and you get ECP. Devices connected to the port shouldn't (IMHO) set the mode on the port... Raúl Núñez de Arenas Coronado -- Linux Registered User 88736 http://www.pleyades.net & http://raul.pleyades.net/