mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Devel <devel@integra-sc.it>
To: Shesha Sreenivasamurthy <shesha@inostor.com>
Cc: linux-kernel@vger.kernel.org, kernelnewbies@nl.linux.org
Subject: Re: O_DIRECT
Date: Thu, 22 Jul 2004 11:46:45 +0200	[thread overview]
Message-ID: <20040722114645.4b64429b.devel@integra-sc.it> (raw)
In-Reply-To: <40FE9F3F.2090205@inostor.com>

Thanks a lot for your answare.
So if i would write information on a partition without a fs i have to write additional information to "retrive" the first one.
Do you know some readable material about o project about that?


Il Wed, 21 Jul 2004 09:52:15 -0700
Shesha Sreenivasamurthy <shesha@inostor.com> scrisse:

> Usually what you do is, partition the disk, create filesystem and read 
> or write files.
>   Reading and writing is without a filesystem.
>    Assume you have maintained some superblock information of your own 
> driver say last 512 bytes you have designated as superblock. You can 
> seek to that position and read the last 512 bytes which is meaningful 
> only to you. Note that I am read/writing raw bytes not any file. 
> Therefore you can read/write without a filesystem and even without any 
> partition,
> 
> -Shesha
> 
> 
> Devel wrote:
> 
> >Hi all,
> >how i can write data on a partition without a filesystem??
> >
> >Saluti Carlo!
> >
> >Il Tue, 20 Jul 2004 20:48:24 +0200
> >bert hubert <ahu@ds9a.nl> scrisse:
> >
> >  
> >
> >>On Tue, Jul 20, 2004 at 10:27:57AM -0700, Shesha Sreenivasamurthy wrote:
> >>    
> >>
> >>>I am having trouble with O_DIRECT. Trying to read or write from a block 
> >>>device partition.
> >>>
> >>>1. Can O_DIRECT be used on a plain block device partition say 
> >>>"/dev/sda11" without having a filesystem on it.
> >>>      
> >>>
> >>As fas as I know, yes, but be aware that O_DIRECT requires page aligned
> >>addresses! (an integral of 4096 on most systems).
> >>
> >>    
> >>
> >>>2. If no file system is created then what should be the softblock size. 
> >>>I am using the IOCTL "BLKBSZGET". Is this correct?
> >>>      
> >>>
> >>No idea what you mean - but see above about the aligned addresses.
> >>
> >>    
> >>
> >>>3. Can we use SEEK_END with O_DIRECT on a partition without filesystem.
> >>>      
> >>>
> >>I see no reason why not. Good luck!
> >>
> >>-- 
> >>http://www.PowerDNS.com      Open source, database driven DNS Software 
> >>http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
> >>-
> >>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> >>the body of a message to majordomo@vger.kernel.org
> >>More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >>Please read the FAQ at  http://www.tux.org/lkml/
> >>
> >>    
> >>
> >
> >--
> >Kernelnewbies: Help each other learn about the Linux kernel.
> >Archive:       http://mail.nl.linux.org/kernelnewbies/
> >FAQ:           http://kernelnewbies.org/faq/
> >
> >
> >.
> >
> >  
> >
> 

  parent reply	other threads:[~2004-07-22  9:41 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-07-20 17:27 O_DIRECT Shesha Sreenivasamurthy
2004-07-20 18:48 ` O_DIRECT bert hubert
     [not found]   ` <40FD6FCB.5020408@inostor.com>
2004-07-20 20:17     ` O_DIRECT bert hubert
2004-07-21  0:10   ` O_DIRECT Rob van Nieuwkerk
2004-07-21 14:45   ` O_DIRECT Devel
     [not found]     ` <40FE9F3F.2090205@inostor.com>
2004-07-22  9:46       ` Devel [this message]
2004-07-24  9:56   ` O_DIRECT Rogier Wolff
2004-07-26  1:24     ` O_DIRECT Andrew Morton
2004-07-21  0:05 ` O_DIRECT Rob van Nieuwkerk
     [not found]   ` <40FEA382.8050700@inostor.com>
2004-07-21 17:20     ` O_DIRECT Rob van Nieuwkerk
     [not found]       ` <40FEAF70.4070407@inostor.com>
2004-07-21 18:15         ` O_DIRECT Rob van Nieuwkerk
2004-07-21 18:45           ` O_DIRECT Shesha Sreenivasamurthy
2004-07-21 23:18           ` O_DIRECT Shesha Sreenivasamurthy
2004-07-21 23:54             ` O_DIRECT Rob van Nieuwkerk
2004-07-22  0:00               ` O_DIRECT Shesha Sreenivasamurthy
2004-07-22  0:18                 ` O_DIRECT Rob van Nieuwkerk
2004-07-22  0:48                   ` O_DIRECT Shesha Sreenivasamurthy
     [not found] <200306262021.h5QKLhN10771@devserv.devel.redhat.com>
     [not found] ` <1056706819.2418.11.camel@sisko.scot.redhat.com>
2003-06-27 10:35   ` O_DIRECT Stephen C. Tweedie
2003-06-27 11:07     ` O_DIRECT Alan Cox
     [not found] <200208291113.g7TBDut26852@tench.street-vision.com>
2002-08-29 11:22 ` O_DIRECT Peter T. Breuer
2002-08-29 12:14 ` O_DIRECT Peter T. Breuer
  -- strict thread matches above, loose matches on Subject: below --
2002-08-29 11:04 O_DIRECT Peter T. Breuer
2001-04-12 21:09 O_DIRECT Andrea Arcangeli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20040722114645.4b64429b.devel@integra-sc.it \
    --to=devel@integra-sc.it \
    --cc=kernelnewbies@nl.linux.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=shesha@inostor.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome