From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264723AbUG2Ngi (ORCPT ); Thu, 29 Jul 2004 09:36:38 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264704AbUG2Ngh (ORCPT ); Thu, 29 Jul 2004 09:36:37 -0400 Received: from users.linvision.com ([62.58.92.114]:58009 "HELO bitwizard.nl") by vger.kernel.org with SMTP id S264677AbUG2NgT (ORCPT ); Thu, 29 Jul 2004 09:36:19 -0400 Date: Thu, 29 Jul 2004 15:36:17 +0200 From: Erik Mouw To: Mikael Pettersson Cc: linux-kernel@vger.kernel.org, wli@holomorphy.com Subject: Re: 2.4.26 doesn't boot on a 386 without "Unsynced TSC support" Message-ID: <20040729133617.GG1395@harddisk-recovery.com> References: <200407281908.i6SJ8c9I015801@harpo.it.uu.se> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200407281908.i6SJ8c9I015801@harpo.it.uu.se> User-Agent: Mutt/1.3.28i Organization: Harddisk-recovery.com Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Jul 28, 2004 at 09:08:38PM +0200, Mikael Pettersson wrote: > On Wed, 28 Jul 2004 17:47:49 +0200, Erik Mouw wrote: > >My question is: is this a code bug, or a documentation bug? Right now, > >I guess 2.4.26 will not run on anything < Pentium without > >CONFIG_X86_TSC_DISABLE enabled. > > It's a limitation in scripts/Configure. > If you start with a .config with TSC enabled/required, > and just flip the CPU selection option to a TSC-less > CPU, like 386 or 486, then you end up with a .config > that _still_ has TSC enabled/required. I was indeed starting from a "known good" .config for an Athlon. > The workaround is to run 'make oldconfig' afterwards. That did the trick. Thanks for the explanation, Erik -- +-- Erik Mouw -- www.harddisk-recovery.com -- +31 70 370 12 90 -- | Lab address: Delftechpark 26, 2628 XH, Delft, The Netherlands