mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "R. J. Wysocki" <rjwysocki@sisk.pl>
To: Mark Watts <m.watts@eris.qinetiq.com>, linux-kernel@vger.kernel.org
Cc: Andrew Morton <akpm@osdl.org>
Subject: Re: 2.6.8-rc2-mm2
Date: Tue, 3 Aug 2004 15:05:37 +0200	[thread overview]
Message-ID: <200408031505.37005.rjwysocki@sisk.pl> (raw)
In-Reply-To: <200408030927.18395.m.watts@eris.qinetiq.com>

On Tuesday 03 of August 2004 10:27, Mark Watts wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
>
> Something bad might have slipped in to do with dual opterons.

I've run it successfully on a dual-Opteron system, so it's not related to dual 
Opterons in general.  Could you be more specific, please?

> Whenever I boot, I get a kernel panic right after it brings up the
> processors.
>
> console=ttyS0 only lets me see
> 'Kernel unable to handle ...'  with the rest cut off.
>
> If I boot normally, there's a couple of oops' or panics on the screen but
> the roll by to fast to see.
>
> .config is attched and its the same config that boots 2.6.8rc2 just fine.

Ah, I've set CONFIG_NR_CPUS=2.  The rest looks similarly.

Greets,
R.

-- 
Rafael J. Wysocki
[tel. (+48) 605 053 693]
----------------------------
For a successful technology, reality must take precedence over public 
relations, for nature cannot be fooled.
					-- Richard P. Feynman

  reply	other threads:[~2004-08-03 12:56 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-08-02  8:55 2.6.8-rc2-mm2 Andrew Morton
2004-08-02  9:23 ` 2.6.8-rc2-mm2 Espen Fjellvær Olsen
2004-08-02 12:10 ` 2.6.8-rc2-mm2 Rik van Riel
2004-08-05 10:56   ` 2.6.8-rc2-mm2 Hideo AOKI
2004-08-05 12:55     ` 2.6.8-rc2-mm2 Hideo AOKI
2004-08-02 13:07 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03  6:43   ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-03  7:35     ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03  7:43       ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-03  7:45       ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04  8:35         ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:12           ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04 10:33             ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 11:42               ` 2.6.8-rc2-mm2 bert hubert
2004-08-05  1:21                 ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:31           ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-04 10:46             ` 2.6.8-rc2-mm2 Nick Piggin
2004-08-04 10:47             ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-04 12:45               ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-05  2:53                 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-05  8:34                   ` 2.6.8-rc2-mm2 Helge Hafting
2004-08-05  9:34                     ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-05 10:47                   ` 2.6.8-rc2-mm2 Ingo Molnar
2004-08-02 13:52 ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 16:12   ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 14:28 ` 2.6.8-rc2-mm2 William Lee Irwin III
2004-08-02 15:31 ` 2.6.8-rc2-mm2 Mark Watts
2004-08-02 15:33   ` 2.6.8-rc2-mm2 Jesper Juhl
2004-08-02 15:38   ` 2.6.8-rc2-mm2 Dominik Karall
2004-08-02 16:02     ` 2.6.8-rc2-mm2 Mark Watts
2004-08-03  6:55   ` 2.6.8-rc2-mm2 Clemens Schwaighofer
2004-08-02 15:57 ` 2.6.8-rc2-mm2 Martin Zwickel
2004-08-02 17:59 ` 2.6.8-rc2-mm2 (compile stats) John Cherry
2004-08-02 18:15 ` 2.6.8-rc2-mm2 Peter Osterlund
2004-08-02 22:16 ` [patch] 2.6.8-rc2-mm2: compile error with SWAP=n Adrian Bunk
2004-08-03  8:27 ` 2.6.8-rc2-mm2 Mark Watts
2004-08-03 13:05   ` R. J. Wysocki [this message]
2004-08-03 13:13 ` 2.6.8-rc2-mm2 Con Kolivas
2004-08-03 19:44 ` 2.6.8-rc2-mm2 Adrian Bunk
2004-08-04 16:32 ` 2.6.8-rc2-mm2 Dominik Karall
2004-08-05  4:38 ` [sparc32] [1/13] turbosparc flush warnings William Lee Irwin III
2004-08-05  4:39   ` [sparc32] [2/13] sparc32 init_idle() William Lee Irwin III
2004-08-05  4:41     ` [sparc32] [3/13] sun4d cpu_present_map is a cpumask_t William Lee Irwin III
2004-08-05  4:44       ` [sparc32] [4/13] smp_processor_id() BITFIXUP fixes William Lee Irwin III
2004-08-05  4:46         ` [sparc32] [5/13] reinstate smp_reschedule_irq() William Lee Irwin III
2004-08-05  4:47           ` [sparc32] [6/13] remove references to start_secondary() William Lee Irwin III
2004-08-05  4:48             ` [sparc32] [7/13] remove references to num_context_patch2 William Lee Irwin III
2004-08-05  4:49               ` [sparc32] [8/13] define cache_decay_ticks William Lee Irwin III
2004-08-05  4:54                 ` [sparc32] [9/13] remove unused variable in dvma.c William Lee Irwin III
2004-08-05  4:55                   ` [sparc32] [10/13] sun4 does not support SMP William Lee Irwin III
2004-08-05  4:56                     ` [sparc32] [11/13] make CONFIG_SMP depend on CONFIG_BROKEN William Lee Irwin III
2004-08-05  5:01                       ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S William Lee Irwin III
2004-08-05  5:31                         ` [sparc32] [13/13] ignore undefined symbols with 3 or more leading underscores William Lee Irwin III
2004-08-05  7:28                         ` [sparc32] [12/13] gcc-3.3 macro parenthesization fix for memcpy.S Jakub Jelinek
2004-08-05  7:38                           ` William Lee Irwin III

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200408031505.37005.rjwysocki@sisk.pl \
    --to=rjwysocki@sisk.pl \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.watts@eris.qinetiq.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®