[PATCH] ibmasm: add missing pci_enable_device()

[Bjorn Helgaas <bjorn.helgaas@hp.com>]

I don't have this hardware, so this has not been tested.


Add pci_enable_device()/pci_disable_device().  In the past, drivers
often worked without this, but it is now required in order to route
PCI interrupts correctly.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>

===== drivers/misc/ibmasm/module.c 1.2 vs edited =====
--- 1.2/drivers/misc/ibmasm/module.c	2004-05-14 06:00:50 -06:00
+++ edited/drivers/misc/ibmasm/module.c	2004-08-04 13:15:46 -06:00
@@ -62,10 +62,17 @@
 	int result = -ENOMEM;
 	struct service_processor *sp;
 
+	if (pci_enable_device(pdev)) {
+		printk(KERN_ERR "%s: can't enable PCI device at %s\n",
+			DRIVER_NAME, pci_name(pdev));
+		return -ENODEV;
+	}
+
 	sp = kmalloc(sizeof(struct service_processor), GFP_KERNEL);
 	if (sp == NULL) {
 		dev_err(&pdev->dev, "Failed to allocate memory\n");
-		return result;
+		result = -ENOMEM;
+		goto error_kmalloc;
 	}
 	memset(sp, 0, sizeof(struct service_processor));
 
@@ -148,6 +155,8 @@
 	ibmasm_event_buffer_exit(sp);
 error_eventbuffer:
 	kfree(sp);
+error_kmalloc:
+	pci_disable_device(pdev);
 
 	return result;
 }
@@ -166,6 +175,7 @@
 	iounmap(sp->base_address);
 	ibmasm_event_buffer_exit(sp);
 	kfree(sp);
+	pci_disable_device(pdev);
 }
 
 static struct pci_device_id ibmasm_pci_table[] =