Re: 2.6 kernel won't reboot on AMD system - 8042 problem?

[Sascha Wilde <wilde@sha-bang.de>]

On Thu, Aug 05, 2004 at 02:48:02PM +0200, David N. Welton wrote:
> [ Please CC replies to me. ]
> 
> David N. Welton wrote:

> drivers/input/serio.c:753

drivers/input/serio/i8042.c
right?

> 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
> 		printk(KERN_ERR "i8042.c: Can't write CTR while initializing 
> 		i8042.\n");
> 		return -1;
> 	}
> 
> If I do the reboot instructions before this, it reboots fine. 
> Afterwards, and it just sits there, no reboot.

This is quite interesting, as there is only one function/macro, which
seems to be messing up things -- I don't know much (hardly anything)
aboout that hardwarestuff, but I'll have a look at i8042_command as
soon as I find the time.  At least it's a start...

> Sascha, to see if your problem is the same as mine, you might try 
> putting this bit of code before the above call:

[reboot code]
> 
> It will cause your machine to reboot before it's even finished booting, 

It works, so this seems to be the exactly same issue.  I only tested
with the code before the point above, I'll do further testings at the
weekend, but I'm quite optimistic, that you found the point of
failure.  Thanks!

> so don't do it with your only available kernel!

don't worry, lots o'kernel here...  ;-)

cheers
sascha
-- 
Sascha Wilde : "There are 10 types of people in the world. 
             : Those who understand binary and those who don't."