From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S266879AbUHIUmE (ORCPT ); Mon, 9 Aug 2004 16:42:04 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S267274AbUHIUlR (ORCPT ); Mon, 9 Aug 2004 16:41:17 -0400 Received: from fw.osdl.org ([65.172.181.6]:16876 "EHLO mail.osdl.org") by vger.kernel.org with ESMTP id S266879AbUHIUgH (ORCPT ); Mon, 9 Aug 2004 16:36:07 -0400 Date: Mon, 9 Aug 2004 13:14:21 -0700 From: "Randy.Dunlap" To: Henry Molina Cc: linux-kernel@vger.kernel.org Subject: Re: EDD Support Message-Id: <20040809131421.61cfa546.rddunlap@osdl.org> In-Reply-To: <1092082252.2907.123.camel@prometeo> References: <1092069811.2907.85.camel@prometeo> <20040809093545.5a5e1673.rddunlap@osdl.org> <1092073482.2907.88.camel@prometeo> <1092082252.2907.123.camel@prometeo> Organization: OSDL X-Mailer: Sylpheed version 0.9.10 (GTK+ 1.2.10; i686-pc-linux-gnu) X-Face: +5V?h'hZQPB9kW Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 09 Aug 2004 15:10:52 -0500 Henry Molina wrote: | Ok Patrick, but /sys/firmware is not created. | | I using now module-init-tools 3.00-pre10 | | modprobe -v -s edd | insmod /lib/modules/2.6.5-1.358/kernel/drivers/firmware/edd.ko 2.6.5 ?? you said 2.6.7 elsewhere. Please test a current kernel. | and /proc/kmsg shows: | <6>BIOS EDD facility v0.15 2004-May-17, 1 devices found That's better. | On Mon, 2004-08-09 at 12:44, Henry Molina wrote: | > No Randy, no messages, I'm using insmod from BusyBox v1.00-pre10, and | > lsmod shows the module ok. | > | > On Mon, 2004-08-09 at 11:35, Randy.Dunlap wrote: | > > On Mon, 09 Aug 2004 11:43:31 -0500 Henry Molina wrote: | > > | > > | Hi everyone, | > > | > > Hi Henry, | > > | > > | I'm compiling kernel 2.6.7 with CONFIG_EDD fine, then I proceed to | > > | install the module but I can't get the /proc/sys/firmware/edd entry. | > > | | > > | Any Suggestion?. | > > | > > Any kernel log messages when you load the module? | > > Hint: there should be. | > > | > > | Many Thanks, | > > | | > > | Henry Molina | > > | | > > | PD: I attach the dmidecode output | > > | | > > | # dmidecode 2.2 | > > | SMBIOS 2.3 present. | > > | 31 structures occupying 1017 bytes. | > > | Table at 0x000F0630. | > > | Handle 0x0000 | > > | DMI type 0, 20 bytes. | > > | BIOS Information | > > | Vendor: American Megatrends Inc. | > > | Version: 1.02 | > > | Release Date: 05/09/2003 | > > | Address: 0xF0000 | > > | Runtime Size: 64 kB | > > | ROM Size: 512 kB | > > | Characteristics: | > > | ISA is supported | > > | PCI is supported | > > | PNP is supported | > > | APM is supported | > > | BIOS is upgradeable | > > | BIOS shadowing is allowed | > > | ESCD support is available | > > | Boot from CD is supported | > > | Selectable boot is supported | > > | BIOS ROM is socketed | > > | EDD is supported | > > | 5.25"/360 KB floppy services are supported (int 13h) | > > | 5.25"/1.2 MB floppy services are supported (int 13h) | > > | 3.5"/720 KB floppy services are supported (int 13h) | > > | 3.5"/2.88 MB floppy services are supported (int 13h) | > > | Print screen service is supported (int 5h) | > > | 8042 keyboard services are supported (int 9h) | > > | Printer services are supported (int 17h) | > > | CGA/mono video services are supported (int 10h) | > > | ACPI is supported | > > | USB legacy is supported | > > | AGP is supported | > > | LS-120 boot is supported | > > | ATAPI Zip drive boot is supported | > > | BIOS boot specification is supported | > > | Handle 0x0001 | > > | DMI type 1, 25 bytes. | > > | System Information | > > | Manufacturer: Hewlett-Packard | > > | Product Name: HP d220 MT (DC526A) | > > | Version: | > > | Serial Number: MXD33701GQ | > > | UUID: 15F4C490-59EA-D711-851C-517B4801761B | > > | Wake-up Type: Power Switch | > > | Handle 0x0002 | > > | DMI type 2, 8 bytes. | > > | Base Board Information | > > | Manufacturer: Lite-On Tech. | > > | Product Name: 0888h | > > | Version: | > > | Serial Number: 01234567 | > > | Handle 0x0003 | > > | DMI type 3, 17 bytes. | > > | Chassis Information | > > | Manufacturer: Hewlett-Packard | > > | Type: Desktop | > > | Lock: Not Present | > > | Version: | > > | Serial Number: | > > | Asset Tag: | > > | Boot-up State: Safe | > > | Power Supply State: Safe | > > | Thermal State: Safe | > > | Security Status: None | > > | OEM Information: 0x00000000 | > > | Handle 0x0004 | > > | DMI type 4, 32 bytes. | > > | Processor Information | > > | Socket Designation: mPGA-478 | > > | Type: Central Processor | > > | Family: Pentium 4 | > > | Manufacturer: Intel | > > | ID: 29 0F 41 33 FF FB EB BF | > > | Signature: Type 0, Family 34F, Model 12, Stepping 9 | > > | Flags: | > > | FPU (Floating-point unit on-chip) | > > | VME (Virtual mode extension) | > > | DE (Debugging extension) | > > | PSE (Page size extension) | > > | TSC (Time stamp counter) | > > | MSR (Model specific registers) | > > | PAE (Physical address extension) | > > | MCE (Machine check exception) | > > | CX8 (CMPXCHG8 instruction supported) | > > | APIC (On-chip APIC hardware supported) | > > | SEP (Fast system call) | > > | MTRR (Memory type range registers) | > > | PGE (Page global enable) | > > | MCA (Machine check architecture) | > > | CMOV (Conditional move instruction supported) | > > | PAT (Page attribute table) | > > | PSE-36 (36-bit page size extension) | > > | CLFSH (CLFLUSH instruction supported) | > > | DS (Debug store) | > > | ACPI (ACPI supported) | > > | MMX (MMX technology supported) | > > | FXSR (Fast floating-point save and restore) | > > | SSE (Streaming SIMD extensions) | > > | SSE2 (Streaming SIMD extensions 2) | > > | SS (Self-snoop) | > > | HTT (Hyper-threading technology) | > > | TM (Thermal monitor supported) | > > | SBF (Signal break on FERR) | > > | Version: PENTIUM 4 | > > | Voltage: 2.9 V | > > | External Clock: 133 MHz | > > | Max Speed: 4000 MHz | > > | Current Speed: 2400 MHz | > > | Status: Populated, Enabled | > > | Upgrade: ZIF Socket | > > | L1 Cache Handle: 0x0005 | > > | L2 Cache Handle: 0x0006 | > > | L3 Cache Handle: Not Provided | > > | Handle 0x0005 | > > | DMI type 7, 19 bytes. | > > | Cache Information | > > | Socket Designation: Internal Cache | > > | Configuration: Enabled, Not Socketed, Level 1 | > > | Operational Mode: Write Back | > > | Location: Internal | > > | Installed Size: 8 KB | > > | Maximum Size: 1024 KB | > > | Supported SRAM Types: | > > | Synchronous | > > | Installed SRAM Type: Pipeline Burst Synchronous | > > | Speed: 40 ns | > > | Error Correction Type: Single-bit ECC | > > | System Type: Data | > > | Associativity: 4-way Set-associative | > > | Handle 0x0006 | > > | DMI type 7, 19 bytes. | > > | Cache Information | > > | Socket Designation: Internal Cache | > > | Configuration: Enabled, Not Socketed, Level 2 | > > | Operational Mode: Write Back | > > | Location: Internal | > > | Installed Size: 512 KB | > > | Maximum Size: 1024 KB | > > | Supported SRAM Types: | > > | Synchronous | > > | Installed SRAM Type: Synchronous | > > | Speed: 40 ns | > > | Error Correction Type: Parity | > > | System Type: Unified | > > | Associativity: 8-way Set-associative | > > | Handle 0x0007 | > > | DMI type 5, 20 bytes. | > > | Memory Controller Information | > > | Error Detecting Method: None | > > | Error Correcting Capabilities: None | > > | Supported Interleave: One-way Interleave | > > | Current Interleave: One-way Interleave | > > | Maximum Memory Module Size: 1024 MB | > > | Maximum Total Memory Size: 2048 MB | > > | Supported Speeds: | > > | Other | > > | Supported Memory Types: | > > | DIMM | > > | SDRAM | > > | Memory Module Voltage: 3.3 V | > > | Associated Memory Slots: 2 | > > | 0x0008 | > > | 0x0009 | > > | Enabled Error Correcting Capabilities: None | > > | Handle 0x0008 | > > | DMI type 6, 12 bytes. | > > | Memory Module Information | > > | Socket Designation: DIMM1 | > > | Bank Connections: 1 0 | > > | Current Speed: Unknown | > > | Type: DIMM SDRAM | > > | Installed Size: 128 MB (Single-bank Connection) | > > | Enabled Size: 128 MB (Single-bank Connection) | > > | Error Status: OK | > > | Handle 0x0009 | > > | DMI type 6, 12 bytes. | > > | Memory Module Information | > > | Socket Designation: DIMM2 | > > | Bank Connections: 3 2 | > > | Current Speed: Unknown | > > | Type: Unknown | > > | Installed Size: Not Installed (Single-bank Connection) | > > | Enabled Size: Not Installed (Single-bank Connection) | > > | Error Status: OK | > > | Handle 0x000A | > > | DMI type 9, 13 bytes. | > > | System Slot Information | > > | Designation: PCI1 | > > | Type: 32-bit PCI | > > | Current Usage: Available | > > | Length: Long | > > | ID: 1 | > > | Characteristics: | > > | 3.3 V is provided | > > | Opening is shared | > > | PME signal is supported | > > | Handle 0x000B | > > | DMI type 9, 13 bytes. | > > | System Slot Information | > > | Designation: PCI2 | > > | Type: 32-bit PCI | > > | Current Usage: Available | > > | Length: Long | > > | ID: 2 | > > | Characteristics: | > > | 3.3 V is provided | > > | Opening is shared | > > | PME signal is supported | > > | Handle 0x000C | > > | DMI type 9, 13 bytes. | > > | System Slot Information | > > | Designation: PCI3 | > > | Type: 32-bit PCI | > > | Current Usage: Available | > > | Length: Long | > > | ID: 3 | > > | Characteristics: | > > | 3.3 V is provided | > > | Opening is shared | > > | PME signal is supported | > > | Handle 0x000D | > > | DMI type 9, 13 bytes. | > > | System Slot Information | > > | Designation: AGP | > > | Type: 32-bit PCI | > > | Current Usage: Available | > > | Length: Long | > > | ID: 1 | > > | Characteristics: | > > | 3.3 V is provided | > > | Opening is shared | > > | PME signal is supported | > > | Handle 0x000E | > > | DMI type 11, 5 bytes. | > > | OEM Strings | > > | String 1: SMBIOS Support from AMI | > > | Handle 0x000F | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: USB0 | > > | Internal Connector Type: None | > > | External Reference Designator: USB1 | > > | External Connector Type: Access Bus (USB) | > > | Port Type: USB | > > | Handle 0x0010 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: USB1 | > > | Internal Connector Type: None | > > | External Reference Designator: USB2 | > > | External Connector Type: Access Bus (USB) | > > | Port Type: USB | > > | Handle 0x0011 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: USB2 | > > | Internal Connector Type: None | > > | External Reference Designator: USB3 | > > | External Connector Type: Access Bus (USB) | > > | Port Type: USB | > > | Handle 0x0012 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: USB3 | > > | Internal Connector Type: None | > > | External Reference Designator: USB4 | > > | External Connector Type: Access Bus (USB) | > > | Port Type: USB | > > | Handle 0x0013 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: USB4 | > > | Internal Connector Type: None | > > | External Reference Designator: USB5 | > > | External Connector Type: Access Bus (USB) | > > | Port Type: USB | > > | Handle 0x0014 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: USB5 | > > | Internal Connector Type: None | > > | External Reference Designator: USB6 | > > | External Connector Type: Access Bus (USB) | > > | Port Type: USB | > > | Handle 0x0015 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: COM1 | > > | Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) | > > | External Reference Designator: COM1 | > > | External Connector Type: DB-9 male | > > | Port Type: Serial Port 16550A Compatible | > > | Handle 0x0016 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: LPT | > > | Internal Connector Type: 25 Pin Dual Inline (pin 26 cut) | > > | External Reference Designator: LPT | > > | External Connector Type: DB-25 male | > > | Port Type: Parallel Port ECP/EPP | > > | Handle 0x0017 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: KEYBOARD | > > | Internal Connector Type: None | > > | External Reference Designator: KEYBOARD | > > | External Connector Type: PS/2 | > > | Port Type: Keyboard Port | > > | Handle 0x0018 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: MOUSE | > > | Internal Connector Type: None | > > | External Reference Designator: MOUSE | > > | External Connector Type: PS/2 | > > | Port Type: Mouse Port | > > | Handle 0x0019 | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: Floppy | > > | Internal Connector Type: On Board Floppy | > > | External Reference Designator: Floppy | > > | External Connector Type: None | > > | Port Type: None | > > | Handle 0x001A | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: Primary IDE | > > | Internal Connector Type: On Board IDE | > > | External Reference Designator: IDE-1 | > > | External Connector Type: None | > > | Port Type: None | > > | Handle 0x001B | > > | DMI type 8, 9 bytes. | > > | Port Connector Information | > > | Internal Reference Designator: Secondary IDE | > > | Internal Connector Type: On Board IDE | > > | External Reference Designator: IDE-2 | > > | External Connector Type: None | > > | Port Type: None | > > | Handle 0x001C | > > | DMI type 12, 5 bytes. | > > | System Configuration Options | > > | Option 1: System Management BIOS from Atlanta | > > | Handle 0x001D | > > | DMI type 13, 22 bytes. | > > | BIOS Language Information | > > | Installable Languages: 4 | > > | English | > > | Traditional Chinese | > > | Simplified Chinese | > > | Japanese | > > | Currently Installed Language: English | > > | Handle 0x001E | > > | DMI type 127, 4 bytes. | > > | End Of Table -- ~Randy