Linux version 2.6.8.1 (thias@cinnamon) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 Sat Aug 21 14:04:46 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001df40000 (usable) BIOS-e820: 000000001df40000 - 000000001df50000 (ACPI data) BIOS-e820: 000000001df50000 - 000000001e000000 (ACPI NVS) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) 479MB LOWMEM available. On node 0 totalpages: 122688 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 118592 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000fad90 ACPI: RSDT (v001 A M I OEMRSDT 0x05000425 MSFT 0x00000097) @ 0x1df40000 ACPI: FADT (v001 A M I OEMFACP 0x05000425 MSFT 0x00000097) @ 0x1df40200 ACPI: ECDT (v001 A M I OEMECDT 0x05000425 MSFT 0x00000097) @ 0x1df40360 ACPI: OEMB (v001 A M I OEMBIOS 0x05000425 MSFT 0x00000097) @ 0x1df50040 ACPI: DSDT (v001 A0009 A0009000 0x00000000 INTL 0x20030522) @ 0x00000000 Built 1 zonelists Kernel command line: ro root=/dev/hda5 acpi_os_name="Microsoft Windows XP" Found and enabled local APIC! Initializing CPU#0 CPU 0 irqstacks, hard=c0400000 soft=c03ff000 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1400.274 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 482424k/490752k available (2055k kernel code, 7556k reserved, 829k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2777.08 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1399.0862 MHz. ..... host bus clock speed is 99.0990 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. ACPI: Found ECDT ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node ddeb37e0), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\ECIO] (Node ddeb3320), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node ddeb2bc0), AE_AML_NO_RETURN_VALUE ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node ddeb2bc0), AE_AML_NO_RETURN_VALUE ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Embedded Controller [EC0] (gpe 6) ACPI-0347: *** Error: Handler for [EmbeddedControl] returned AE_TIME ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node ddeb37e0), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\ECIO] (Node ddeb3320), AE_AML_NO_RETURN_VALUE ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.BAT0._STA] (Node ddeb2bc0), AE_AML_NO_RETURN_VALUE ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) Linux Kernel Card Services options: [pci] [cardbus] [pm] usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:00:14.6[B] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7 ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 7 (level, low) -> IRQ 7 ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 5 (level, low) -> IRQ 5 Machine check exception polling timer started. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Ati IGP9100/M chipset agpgart: Maximum main memory to use for agp memory: 409M agpgart: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI interrupt 0000:00:14.6[B] -> GSI 5 (level, low) -> IRQ 5 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller at PCI slot 0000:00:14.1 ACPI: PCI interrupt 0000:00:14.1[A] -> GSI 11 (level, low) -> IRQ 11 ATIIXP: chipset revision 0 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N060ATMR04-0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 > ieee1394: Initialized config rom entry `ip1394' usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio4 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino: found "Intel(R) Pentium(R) M processor 1400MHz": max frequency: 1400000kHz PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 156k freed Adding 1004020k swap on /dev/hda1. Priority:-1 extents:1 Real Time Clock Driver v1.12 Asus Laptop ACPI Extras version 0.28 L4R model detected, unsupported, trying default values, supply the developers with your DSDT ACPI: PCI interrupt 0000:00:14.5[B] -> GSI 5 (level, low) -> IRQ 5 ATI IXP AC97 controller: probe of 0000:00:14.5 failed with error -13 kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:13.0: PCI device 1002:4347 (ATI Technologies Inc) ohci_hcd 0000:00:13.0: irq 10, pci mem de8d1000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:13.1[A] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:13.1: PCI device 1002:4348 (ATI Technologies Inc) ohci_hcd 0000:00:13.1: irq 10, pci mem de8dc000 ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:13.2[A] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 0000:00:13.2: irq 10, pci mem de8de000 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected hub 3-0:1.0: over-current change on port 1 hub 3-0:1.0: over-current change on port 6 ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 5 (level, low) -> IRQ 5 Yenta: CardBus bridge found at 0000:02:05.0 [1043:1834] Yenta: ISA IRQ mask 0x0018, PCI irq 5 Socket status: 30000006 ohci1394: $Rev: 1223 $ Ben Collins ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 7 (level, low) -> IRQ 7 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[7] MMIO=[fe000000-fe0007ff] Max Packet=[2048] b44.c:v0.94 (May 4, 2004) ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 7 (level, low) -> IRQ 7 eth0: Broadcom 4400 10/100BaseT Ethernet 00:0e:a6:8e:d1:c5 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000317baeb] ip1394: $Rev: 1224 $ Ben Collins ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ip_conntrack version 2.1 (3834 buckets, 30672 max) - 296 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team b44: eth0: Link is down.