Hi Linus! Please apply this patch. It corrects the the wrong use of "DB9" to the correct name, "DE9". Signed-Off-By: Jan-Benedict Glaw --- linux-2.6.9-rc1-bk1/drivers/input/keyboard/lkkbd.c~ 2004-08-25 16:07:18.000000000 +0200 +++ linux-2.6.9-rc1-bk1/drivers/input/keyboard/lkkbd.c 2004-08-25 16:07:45.000000000 +0200 @@ -14,13 +14,13 @@ * DISCLAIMER: This works for _me_. If you break anything by using the * information given below, I will _not_ be liable! * - * RJ11 pinout: To DB9: Or DB25: + * RJ11 pinout: To DE9: Or DB25: * 1 - RxD <----> Pin 3 (TxD) <-> Pin 2 (TxD) * 2 - GND <----> Pin 5 (GND) <-> Pin 7 (GND) * 4 - TxD <----> Pin 2 (RxD) <-> Pin 3 (RxD) - * 3 - +12V (from HDD drive connector), DON'T connect to DB9 or DB25!!! + * 3 - +12V (from HDD drive connector), DON'T connect to DE9 or DB25!!! * - * Pin numbers for DB9 and DB25 are noted on the plug (quite small:). For + * Pin numbers for DE9 and DB25 are noted on the plug (quite small:). For * RJ11, it's like this: * * __=__ Hold the plug in front of you, cable downwards, -- Jan-Benedict Glaw jbglaw@lug-owl.de . +49-172-7608481 _ O _ "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen Krieg _ _ O fuer einen Freien Staat voll Freier Bürger" | im Internet! | im Irak! O O O ret = do_actions((curr | FREE_SPEECH) & ~(NEW_COPYRIGHT_LAW | DRM | TCPA));