From: Lukas Hejtmanek <xhejtman@mail.muni.cz>
To: linux-kernel@vger.kernel.org
Subject: 2.6.9-rc1-mm4 - USB suspend issues
Date: Sun, 12 Sep 2004 18:09:09 +0200 [thread overview]
Message-ID: <20040912160909.GQ2260@mail.muni.cz> (raw)
Hello,
I've tried suspend/resume code of USB devices. Unfortunately it does not work :(
First it complains that USB device has 0 interrupts (as module was not used
since start but it was loaded)
Second I got following messages:
Sep 11 12:55:33 debian kernel: usb_unlink_urb() is deprecated for synchronous
unlinks. Use usb_kill_urb()
Sep 11 12:55:33 debian kernel: Badness in usb_unlink_urb at
drivers/usb/core/urb.c:456
Sep 11 12:55:33 debian kernel: [usb_unlink_urb+132/144]
usb_unlink_urb+0x84/0x90
Sep 11 12:55:33 debian kernel: [port_release+142/195] port_release+0x8e/0xc3
Sep 11 12:55:33 debian kernel: [destroy_inode+78/80] destroy_inode+0x4e/0x50
Sep 11 12:55:33 debian kernel: [device_release+25/92] device_release+0x19/0x5c
Sep 11 12:55:33 debian kernel: [iput+85/111] iput+0x55/0x6f
Sep 11 12:55:33 debian kernel: [kobject_cleanup+152/154]
kobject_cleanup+0x98/0x9a
Sep 11 12:55:33 debian kernel: [kobject_release+0/10] kobject_release+0x0/0xa
Sep 11 12:55:33 debian kernel: [kref_put+57/147] kref_put+0x39/0x93
Sep 11 12:55:33 debian kernel: [kobject_put+30/34] kobject_put+0x1e/0x22
Sep 11 12:55:33 debian kernel: [kobject_put+30/34] kobject_put+0x1e/0x22
Sep 11 12:55:33 debian kernel: [kobject_release+0/10] kobject_release+0x0/0xa
Sep 11 12:55:33 debian kernel: [destroy_serial+313/373]
destroy_serial+0x139/0x175
Sep 11 12:55:33 debian kernel: [hcd_endpoint_disable+179/323]
hcd_endpoint_disable+0xb3/0x143
Sep 11 12:55:33 debian kernel: [destroy_serial+0/373] destroy_serial+0x0/0x175
Sep 11 12:55:33 debian kernel: [kref_put+57/147] kref_put+0x39/0x93
Sep 11 12:55:33 debian kernel: [usb_disable_endpoint+79/81]
usb_disable_endpoint+0x4f/0x51
Sep 11 12:55:33 debian kernel: [usb_serial_disconnect+64/147]
usb_serial_disconnect+0x40/0x93
Sep 11 12:55:33 debian kernel: [destroy_serial+0/373] destroy_serial+0x0/0x175
Sep 11 12:55:33 debian kernel: [usb_unbind_interface+122/124]
usb_unbind_interface+0x7a/0x7c
Sep 11 12:55:33 debian kernel: [device_release_driver+100/102]
device_release_driver+0x64/0x66
Sep 11 12:55:33 debian kernel: [bus_remove_device+100/165]
bus_remove_device+0x64/0xa5
Sep 11 12:55:33 debian kernel: [device_del+93/155] device_del+0x5d/0x9b
Sep 11 12:55:33 debian kernel: [usb_disable_device+185/249]
usb_disable_device+0xb9/0xf9
Sep 11 12:55:33 debian kernel: [usb_disconnect+173/300]
usb_disconnect+0xad/0x12c
Sep 11 12:55:33 debian kernel: [hub_port_connect_change+901/951]
hub_port_connect_change+0x385/0x3b7
Sep 11 12:55:33 debian kernel: [clear_port_feature+88/92]
clear_port_feature+0x58/0x5c
Sep 11 12:55:33 debian kernel: [hub_events+625/947] hub_events+0x271/0x3b3
Sep 11 12:55:33 debian kernel: [hub_thread+47/290] hub_thread+0x2f/0x122
Sep 11 12:55:33 debian kernel: [autoremove_wake_function+0/87]
autoremove_wake_function+0x0/0x57
Sep 11 12:55:33 debian kernel: [autoremove_wake_function+0/87]
autoremove_wake_function+0x0/0x57
Sep 11 12:55:33 debian kernel: [hub_thread+0/290] hub_thread+0x0/0x122
Sep 11 12:55:33 debian kernel: [kernel_thread_helper+5/11]
kernel_thread_helper+0x5/0xb
After resume it disables IRQ 11 for USB and that IRQ is shared with eth0:
Sep 11 12:56:04 debian kernel:
....................................................swsusp: Need to copy 22829
pages
Sep 11 12:56:04 debian kernel: ..<3>irq 11: nobody cared!
Sep 11 12:56:04 debian kernel: [__report_bad_irq+42/139]
__report_bad_irq+0x2a/0x8b
Sep 11 12:56:04 debian kernel: [note_interrupt+124/222]
note_interrupt+0x7c/0xde
Sep 11 12:56:04 debian kernel: [do_IRQ+235/237] do_IRQ+0xeb/0xed
Sep 11 12:56:04 debian kernel: [common_interrupt+24/32]
common_interrupt+0x18/0x20
Sep 11 12:56:05 debian kernel: [__do_softirq+47/138] __do_softirq+0x2f/0x8a
Sep 11 12:56:05 debian kernel: [do_softirq+38/40] do_softirq+0x26/0x28
Sep 11 12:56:05 debian kernel: [do_IRQ+202/237] do_IRQ+0xca/0xed
Sep 11 12:56:05 debian kernel: [common_interrupt+24/32]
common_interrupt+0x18/0x20
Sep 11 12:56:05 debian kernel: [setup_irq+120/170] setup_irq+0x78/0xaa
Sep 11 12:56:05 debian kernel: [usb_hcd_irq+0/103] usb_hcd_irq+0x0/0x67
Sep 11 12:56:05 debian kernel: [request_irq+167/220] request_irq+0xa7/0xdc
Sep 11 12:56:05 debian kernel: [pci_find_capability+41/45]
pci_find_capability+0x29/0x2d
Sep 11 12:56:05 debian kernel: [usb_hcd_pci_resume+143/326]
usb_hcd_pci_resume+0x8f/0x146
Sep 11 12:56:05 debian kernel: [usb_hcd_irq+0/103] usb_hcd_irq+0x0/0x67
Sep 11 12:56:05 debian kernel: [pci_device_resume+44/46]
pci_device_resume+0x2c/0x2e
Sep 11 12:56:05 debian kernel: [resume_device+39/41] resume_device+0x27/0x29
Sep 11 12:56:05 debian kernel: [dpm_resume+98/100] dpm_resume+0x62/0x64
Sep 11 12:56:05 debian kernel: [device_resume+21/33] device_resume+0x15/0x21
Sep 11 12:56:05 debian kernel: [finish+8/58] finish+0x8/0x3a
Sep 11 12:56:05 debian kernel: [pm_suspend_disk+65/126]
pm_suspend_disk+0x41/0x7e
Sep 11 12:56:05 debian kernel: [enter_state+140/144] enter_state+0x8c/0x90
Sep 11 12:56:05 debian kernel: [software_suspend+15/19]
software_suspend+0xf/0x13
Sep 11 12:56:05 debian kernel: [acpi_system_write_sleep+139/141]
acpi_system_write_sleep+0x8b/0x8d
Sep 11 12:56:05 debian kernel: [vfs_write+188/295] vfs_write+0xbc/0x127
Sep 11 12:56:05 debian kernel: [sys_write+81/128] sys_write+0x51/0x80
Sep 11 12:56:05 debian kernel: [syscall_call+7/11] syscall_call+0x7/0xb
--
Lukáš Hejtmánek
reply other threads:[~2004-09-12 16:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20040912160909.GQ2260@mail.muni.cz \
--to=xhejtman@mail.muni.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®