From: Dominik Karall <dominik.karall@gmx.net>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.9-rc2-mm1
Date: Fri, 17 Sep 2004 20:09:44 +0200 [thread overview]
Message-ID: <200409172009.47617.dominik.karall@gmx.net> (raw)
In-Reply-To: <20040916024020.0c88586d.akpm@osdl.org>
[-- Attachment #1: Type: text/plain, Size: 16930 bytes --]
On Thursday 16 September 2004 11:40, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc2/2.6
>.9-rc2-mm1/
I get a lot of usb error messages on boot, here the relevant dmesg output.
I also attached lsusb -v output, which maybe useful, if you need more
information, let me know!
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
input: PC Speaker
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4 S5)
ACPI wakeup devices:
FUTS PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 PS2M PS2K
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 136k freed
Adding 514040k swap on /dev/hda9. Priority:-1 extents:1
EXT3 FS on hda10, internal journal
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
ohci1394: $Rev: 1226 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e2427000-e24277ff]
Max Packet=[2048]
snd: Unknown parameter `device_gid'
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
intel8x0_measure_ac97_clock: measured 49665 usecs
intel8x0: clocking to 48000
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 20, pci mem 0xe2420000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: SiS init quirk
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller
(#2)
ohci_hcd 0000:00:03.1: irq 21, pci mem 0xe2421000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: SiS init quirk
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
(#3)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc001ee09a]
ohci_hcd 0000:00:03.2: irq 22, pci mem 0xe2422000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.2: SiS init quirk
usb 2-1: new full speed USB device using address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 23, pci mem 0xe2423000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
usb 2-1: USB disconnect, address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ohci_hcd 0000:00:03.1: wakeup
sis900.c: v1.08.07 11/02/2003
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: Unknown PHY transceiver found at address 0.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Unknown PHY transceiver found at address 2.
eth0: Unknown PHY transceiver found at address 3.
eth0: Unknown PHY transceiver found at address 4.
eth0: Unknown PHY transceiver found at address 5.
eth0: Unknown PHY transceiver found at address 6.
eth0: Unknown PHY transceiver found at address 7.
eth0: Unknown PHY transceiver found at address 8.
eth0: Unknown PHY transceiver found at address 9.
eth0: Unknown PHY transceiver found at address 10.
eth0: Unknown PHY transceiver found at address 11.
eth0: Unknown PHY transceiver found at address 12.
eth0: Unknown PHY transceiver found at address 13.
eth0: Unknown PHY transceiver found at address 14.
eth0: Unknown PHY transceiver found at address 15.
eth0: Unknown PHY transceiver found at address 16.
eth0: Unknown PHY transceiver found at address 17.
eth0: Unknown PHY transceiver found at address 18.
eth0: Unknown PHY transceiver found at address 19.
eth0: Unknown PHY transceiver found at address 20.
eth0: Unknown PHY transceiver found at address 21.
eth0: Unknown PHY transceiver found at address 22.
eth0: Unknown PHY transceiver found at address 23.
eth0: Unknown PHY transceiver found at address 24.
eth0: Unknown PHY transceiver found at address 25.
usb 2-1: new full speed USB device using address 3
eth0: Unknown PHY transceiver found at address 26.
eth0: Unknown PHY transceiver found at address 27.
eth0: Unknown PHY transceiver found at address 28.
eth0: Unknown PHY transceiver found at address 29.
eth0: Unknown PHY transceiver found at address 30.
eth0: Unknown PHY transceiver found at address 31.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:10:fa:3f:29:16.
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: RealTek RTL8139 at 0xd134a000, 00:50:fc:2d:9a:5c, IRQ 18
eth1: Identified 8139 chip type 'RTL-8139C'
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb 2-1: control timeout on ep0in
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
eth0: Media Link On 100mbps full-duplex
eth0: Media Link On 100mbps full-duplex
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb usb3: string descriptor 0 read error: -113
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb 2-1: string descriptor 0 read error: -110
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
usb usb1: string descriptor 0 read error: -113
lsusb -v:
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.8.1-ck8 ehci_hcd
iProduct 2 Silicon Integrated Systems [SiS] USB 2.0
Controller
iSerial 1 0000:00:03.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 12
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.8.1-ck8 ohci_hcd
iProduct 2 Silicon Integrated Systems [SiS] USB 1.0
Controller(#3)
iSerial 1 0000:00:03.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 002 Device 003: ID 0db0:6982 Micro Star International Medion Flash XL
V2.7ACard Reader
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0db0 Micro Star International
idProduct 0x6982 Medion Flash XL V2.7A Card Reader
bcdDevice 2.6d
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0x80
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 bytes 64 once
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 bytes 64 once
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 bytes 8 once
bInterval 10
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.8.1-ck8 ohci_hcd
iProduct 2 Silicon Integrated Systems [SiS] USB 1.0
Controller(#2)
iSerial 1 0000:00:03.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.8.1-ck8 ohci_hcd
iProduct 2 Silicon Integrated Systems [SiS] USB 1.0
Controller
iSerial 1 0000:00:03.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
[-- Attachment #2: Type: application/pgp-signature, Size: 307 bytes --]
next prev parent reply other threads:[~2004-09-17 18:02 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-16 9:40 2.6.9-rc2-mm1 Andrew Morton
2004-09-16 13:10 ` 2.6.9-rc2-mm1 Diego Calleja
2004-09-16 12:27 ` 2.6.9-rc2-mm1 Alan Cox
2004-09-16 13:34 ` 2.6.9-rc2-mm1 Ryan Cumming
2004-09-16 14:20 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-16 16:45 ` 2.6.9-rc2-mm1 Norberto Bensa
2004-09-16 17:16 ` 2.6.9-rc2-mm1 Arjan van de Ven
2004-09-16 17:28 ` 2.6.9-rc2-mm1 Norberto Bensa
2004-09-16 17:30 ` 2.6.9-rc2-mm1 Arjan van de Ven
2004-09-17 19:29 ` 2.6.9-rc2-mm1 Valdis.Kletnieks
2004-09-20 17:41 ` 2.6.9-rc2-mm1 Terence Ripperda
2004-09-16 17:37 ` 2.6.9-rc2-mm1 Jedi/Sector One
2004-09-16 17:57 ` 2.6.9-rc2-mm1 Norberto Bensa
2004-09-16 17:14 ` 2.6.9-rc2-mm1 Jesse Barnes
2004-09-16 17:38 ` 2.6.9-rc2-mm1 Bjorn Helgaas
2004-09-17 3:00 ` 2.6.9-rc2-mm1 Norberto Bensa
2004-09-17 18:09 ` Dominik Karall [this message]
2004-09-18 1:10 ` 2.6.9-rc2-mm1 Sean Neakums
2004-09-18 6:01 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-18 8:18 ` 2.6.9-rc2-mm1 Russell King
2004-09-20 1:12 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-20 4:37 ` 2.6.9-rc2-mm1 Paul Jackson
2004-09-20 23:27 ` 2.6.9-rc2-mm1 Jesse Barnes
2004-09-20 2:34 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-20 4:18 ` 2.6.9-rc2-mm1 Albert Cahalan
2004-09-20 7:47 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-20 15:00 ` 2.6.9-rc2-mm1 Albert Cahalan
2004-09-20 21:01 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-20 22:20 ` 2.6.9-rc2-mm1 William Lee Irwin III
[not found] ` <200409201939.04207.>
2004-09-20 17:58 ` 2.6.9-rc2-mm1 Andrew Morton
2004-09-20 20:15 ` 2.6.9-rc2-mm1 Magnus Määttä
2004-09-20 20:45 ` 2.6.9-rc2-mm1 David Howells
2004-09-24 5:30 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-24 7:11 ` 2.6.9-rc2-mm1 Jens Axboe
2004-09-24 7:24 ` 2.6.9-rc2-mm1 William Lee Irwin III
2004-09-17 5:18 2.6.9-rc2-mm1 Protasevich, Natalie
2004-09-17 6:50 ` 2.6.9-rc2-mm1 Len Brown
2004-09-17 15:57 ` 2.6.9-rc2-mm1 Jesse Barnes
[not found] <2F1dX-2r9-5@gated-at.bofh.it>
[not found] ` <2F7VJ-7o7-7@gated-at.bofh.it>
[not found] ` <2F8fj-7yw-39@gated-at.bofh.it>
[not found] ` <2F8oL-7DK-1@gated-at.bofh.it>
[not found] ` <2F8oR-7DK-17@gated-at.bofh.it>
[not found] ` <2FwKr-7VO-7@gated-at.bofh.it>
[not found] ` <2GAsE-21G-9@gated-at.bofh.it>
2004-09-20 19:30 ` 2.6.9-rc2-mm1 Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200409172009.47617.dominik.karall@gmx.net \
--to=dominik.karall@gmx.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®