mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Steven A. DuChene" <linux-clusters@mindspring.com>
To: linux-kernel@vger.kernel.org
Subject: AIC-7899 not found with 2.6.9-rc4-mm1
Date: Thu, 14 Oct 2004 06:28:49 -0400	[thread overview]
Message-ID: <20041014062848.U22429@lapsony.mydomain.here> (raw)

I have a system with two on-board SCSI controllers (see lsoci output below)
and one AHA-2940U stuck into a PCI slot. The on-board controllers are Adaptec
AIC-7899P U160 chips on the Intel server mboard. I have been running the system with
2.6.8-rc4-mm1 but detected some abnormalities with NFS server subsystem stuff
so I decided to update to 2.6.9-rc4-mm1 however when I did so only the AHA-2940U
card that is stuck into the PCI slot is found. Since this is not the controller
with the disks attached the system is not able to find it's root filesystem.
The output of lspci looks like:

xcvs:/usr/local/src/linux-2.6.9-rc4-mm1 # lspci 
00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 05)
00:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a)
00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:07.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
00:08.0 SCSI storage controller: Adaptec AHA-2940U/UW/D / AIC-7881U
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4f)
00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04)
01:04.0 SCSI storage controller: Adaptec AIC-7899P U160/m
01:04.1 SCSI storage controller: Adaptec AIC-7899P U160/m

In my .config file I have the following set:

CONFIG_SCSI_AIC7XXX=y 
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set

This same configuration worked fine with 2.6.8-rc4-mm1 but not with the
2.6.9-rc4-mm1 source tree. Later this afternoon I will try backing out
the mm1 patch to the 2.6.9-rc4 source tree and see if the problem still
occures with just the plain 2.6.9-rc4 kernel.
-- 
Steven A. DuChene     linux-clusters at mindspring dot com

             reply	other threads:[~2004-10-14 14:15 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-10-14 10:28 Steven A. DuChene [this message]
2004-10-14 16:09 ` K.R. Foley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20041014062848.U22429@lapsony.mydomain.here \
    --to=linux-clusters@mindspring.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®