mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Gene Heskett <gene.heskett@verizon.net>
To: linux-kernel@vger.kernel.org
Cc: Stephen Wille Padnos <spadnos@sover.net>
Subject: Re: I/O card vs linux
Date: Mon, 18 Oct 2004 05:46:53 -0400	[thread overview]
Message-ID: <200410180546.53707.gene.heskett@verizon.net> (raw)
In-Reply-To: <41734721.3070508@sover.net>

On Monday 18 October 2004 00:31, Stephen Wille Padnos wrote:
>Gene Heskett wrote:
>>Greetings;
>>
>>This may be OT, but can anyone advise me on a pci card thats
>> basicly an 8255 with a 34 pin or greater port on the card or back
>> panel to bring out all 3 ports, and a suitable linux compatible
>> driver for it?
>
>3 possibilities: (there are more, including some with industrial
>protection, isolation, etc.)
>
>www.computerboards.com : PCI-DIO24 and PCI-DIO24H, $89.  These are
>basically a single 8255 connected to the bus through a PCI glue
> chip. They don't seem to provide a driver, but I would think the
> board would be set up automatically by the PCI code, and then there
> are just the standard 4 ports to read/write (you just have to find
> the base address theough the PCI subsystem).
>
>www.ni.com : NI-PCI-6503, $145.  This is a 24 I/O board, but has
> added logic (like a programmable power-on I/O state).  There don't
> seem to be Linux drivers, but they may exist if you ask tech
> support.  (NI is fairly Linux-friendly - they made a LabView/Linux
> version).
>
>www.byterunner.com : PCI-1284-P2, $39.95.  This is a dual IEEE1284
> PCI parallel port card, with Linux drivers.  It's not quite what
> you're looking for, but it will give you 24 I/O's (16 bidir, 10
> dedicated, 2 interrupts).
>
>Hope this helps
>- Steve

I did find the NI site, but the $ scared me off, I'm trying to do this 
on the cheap since I'm mostly retired now.  I have a triple 8255 
board with 72 I/O lines from Futurlec.com coming now, with surface 
shipping, a hair over $70.  I don't believe the output is more than 
what the 8255 can sink by itself, no real buffering seems to be 
visible in the photo's on their wab page.  Its called the PCI8255.
The byterunner card might possibly be usable too but it didn't fall 
out of the search terms I used.  Bios wise, I'll find out when it 
gets here sometime this week.

Thanks Stephen.

-- 
Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.27% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com attorneys please note, additions to this message
by Gene Heskett are:
Copyright 2004 by Maurice Eugene Heskett, all rights reserved.

      reply	other threads:[~2004-10-18  9:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-10-16  8:23 Gene Heskett
2004-10-17 12:18 ` Jan-Benedict Glaw
2004-10-17 14:15   ` Gene Heskett
2004-10-18  4:31 ` Stephen Wille Padnos
2004-10-18  9:46   ` Gene Heskett [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200410180546.53707.gene.heskett@verizon.net \
    --to=gene.heskett@verizon.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=spadnos@sover.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®