From: Kahro Raie <kahroo@hot.ee>
To: linux-kernel@vger.kernel.org
Subject: ERROR: Disabling IRQ #11
Date: Fri, 29 Oct 2004 09:27:46 +0300 (EEST) [thread overview]
Message-ID: <20041029062746.B69E312CE@portal.hot.ee> (raw)
[-- Attachment #1: Type: text/plain, Size: 1293 bytes --]
Description:
After my system has been up for about 10 minutes I allways get the following 2 line error message on every console:
Message from syslogd@etna at Fri Oct 29 08:46:55 2004 ...
etna kernel: Disabling IRQ #11
Keywords:
kernel irq 11 usb_hcd_irq usbcore
Kernel version:
Linux version 2.6.8-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 Thu Oct 7 03:15:25 EDT 2004
My system:
Debian GNU/Linux (testing)
Other notes:
I think that the dmesg info is the most relevant and descriptive as it contains a block that appares when the error is reported:
irq 11: nobody cared!
[<c010841a>] __report_bad_irq+0x2a/0x90
[<c0108510>] note_interrupt+0x70/0xb0
[<c01087f0>] do_IRQ+0x120/0x130
[<c0106a20>] common_interrupt+0x18/0x20
[<c028007b>] schedule+0x38b/0x4d0
[<c0104053>] default_idle+0x23/0x40
[<c01040e4>] cpu_idle+0x34/0x40
[<c03307b8>] start_kernel+0x1a8/0x1f0
[<c0330380>] unknown_bootoption+0x0/0x160
handlers:
[<e029c770>] (usb_hcd_irq+0x0/0x70 [usbcore])
[<e029c770>] (usb_hcd_irq+0x0/0x70 [usbcore])
Disabling IRQ #11
I don't need a replay for my mail, I just want to report that the bug still excists on my system and hope my info helps.
-----------------------------------------
ITV - Sinu lemmiksaated internetis!
http://www.itv.ee
[-- Attachment #2: "proc.cpuinfo" --]
[-- Type: application/octet-stream, Size: 407 bytes --]
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 11
model name : Intel(R) Celeron(TM) CPU 1100MHz
stepping : 1
cpu MHz : 1102.870
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 2179.07
[-- Attachment #3: "proc.iomem" --]
[-- Type: application/octet-stream, Size: 661 bytes --]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccfff : Video ROM
000f0000-000fffff : System ROM
00100000-1f7effff : System RAM
00100000-0028190a : Kernel code
0028190b-0032cadf : Kernel data
1f7f0000-1f7f2fff : ACPI Non-volatile Storage
1f7f3000-1f7fffff : ACPI Tables
d0000000-d7ffffff : 0000:00:08.0
d8000000-daffffff : PCI Bus #01
d9000000-d97fffff : 0000:01:00.0
d9800000-d9ffffff : 0000:01:00.0
da000000-da01ffff : 0000:01:00.0
dc000000-dc3fffff : 0000:00:00.0
dc400000-dc40ffff : 0000:00:08.0
dc410000-dc4100ff : 0000:00:0e.0
dc410000-dc4100ff : 8139too
ffff0000-ffffffff : reserved
[-- Attachment #4: "proc.ioports" --]
[-- Type: application/octet-stream, Size: 758 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
5000-500f : 0000:00:07.4
6000-607f : 0000:00:07.4
c000-c00f : 0000:00:07.1
c000-c007 : ide0
c008-c00f : ide1
c400-c41f : 0000:00:07.2
c400-c41f : uhci_hcd
c800-c81f : 0000:00:07.3
c800-c81f : uhci_hcd
cc00-ccff : 0000:00:07.5
cc00-ccff : VIA686A
d000-d003 : 0000:00:07.5
d400-d403 : 0000:00:07.5
d400-d401 : VIA82xx MPU401
dc00-dcff : 0000:00:08.0
e000-e0ff : 0000:00:0e.0
e000-e0ff : 8139too
[-- Attachment #5: "proc.modules" --]
[-- Type: application/octet-stream, Size: 2310 bytes --]
radeon 132452 2 - Live 0xe037f000
ipv6 264612 8 - Live 0xe03a5000
8139cp 20672 0 - Live 0xe0352000
8139too 26112 0 - Live 0xe034a000
mii 5120 2 8139cp,8139too, Live 0xe02ed000
crc32 4320 2 8139cp,8139too, Live 0xe0293000
snd_via82xx 29540 2 - Live 0xe02c5000
snd_ac97_codec 70020 1 snd_via82xx, Live 0xe031d000
snd_pcm_oss 55048 0 - Live 0xe030e000
snd_mixer_oss 20096 2 snd_pcm_oss, Live 0xe02d6000
snd_pcm 98728 2 snd_via82xx,snd_pcm_oss, Live 0xe02f4000
snd_timer 25668 1 snd_pcm, Live 0xe02ce000
snd_page_alloc 11752 2 snd_via82xx,snd_pcm, Live 0xe0285000
gameport 4704 1 snd_via82xx, Live 0xe0282000
snd_mpu401_uart 7968 1 snd_via82xx, Live 0xe0237000
snd_rawmidi 25156 1 snd_mpu401_uart, Live 0xe028b000
snd_seq_device 8200 1 snd_rawmidi, Live 0xe027e000
snd 57156 11 snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device, Live 0xe02b6000
soundcore 10336 2 snd, Live 0xe0233000
uhci_hcd 33136 0 - Live 0xe0274000
usbcore 119012 3 uhci_hcd, Live 0xe0297000
pci_hotplug 34640 0 - Live 0xe026a000
via_agp 9056 1 - Live 0xe022a000
agpgart 34696 2 via_agp, Live 0xe0260000
parport_pc 35392 0 - Live 0xe0256000
parport 41832 1 parport_pc, Live 0xe024a000
mousedev 10476 2 - Live 0xe0217000
floppy 61200 0 - Live 0xe023a000
tsdev 7392 0 - Live 0xe021b000
psmouse 20360 0 - Live 0xe021f000
pcspkr 3592 0 - Live 0xe0048000
evdev 9600 0 - Live 0xe0213000
nls_iso8859_1 4032 1 - Live 0xe0140000
nls_cp437 5696 1 - Live 0xe013d000
capability 4520 0 - Live 0xe0091000
commoncap 7232 1 capability, Live 0xe004a000
ide_cd 42656 0 - Live 0xe00ac000
cdrom 40732 1 ide_cd, Live 0xe009f000
rtc 12760 0 - Live 0xe009a000
vfat 14656 1 - Live 0xe0036000
fat 46784 1 vfat, Live 0xe004e000
reiserfs 247760 1 - Live 0xe0144000
ext2 71848 0 - Live 0xe00ba000
ext3 127240 0 - Live 0xe00df000
jbd 62616 1 ext3, Live 0xe0080000
mbcache 9348 2 ext2,ext3, Live 0xe001c000
ide_generic 1408 0 - Live 0xe00b8000
ide_disk 19296 4 - Live 0xe0094000
via82cxxx 14332 1 - Live 0xe003b000
ide_core 139940 4 ide_cd,ide_generic,ide_disk,via82cxxx, Live 0xe005c000
unix 28692 410 - Live 0xe002d000
font 8320 0 - Live 0xe0020000
vesafb 6656 0 - Live 0xe0013000
cfbcopyarea 3840 1 vesafb, Live 0xe001a000
cfbimgblt 3040 1 vesafb, Live 0xe0018000
cfbfillrect 3776 1 vesafb, Live 0xe0016000
[-- Attachment #6: "lspci" --]
[-- Type: application/octet-stream, Size: 7453 bytes --]
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at dc000000 (32-bit, prefetchable) [size=4M]
Capabilities: [a0] AGP version 2.0
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d8000000-daffffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at c000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.4 0080: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. Onboard Audio on EP7KXA
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at cc00 [size=256]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at d400 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:08.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon 7500] (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd RV200 QW [Radeon 7500 PCI Dual Display]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at dc00 [size=256]
Region 2: Memory at dc400000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at dc410000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 6a) (prog-if 00 [VGA])
Subsystem: Trident Microsystems CyberBlade/i1
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 169
Region 0: Memory at d9800000 (32-bit, non-prefetchable) [disabled] [size=8M]
Region 1: Memory at da000000 (32-bit, non-prefetchable) [disabled] [size=128K]
Region 2: Memory at d9000000 (32-bit, non-prefetchable) [disabled] [size=8M]
Capabilities: [80] AGP version 2.0
Status: RQ=33 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [90] Power Management version 1
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[-- Attachment #7: "dmesg" --]
[-- Type: application/octet-stream, Size: 13733 bytes --]
next reply other threads:[~2004-10-29 6:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-29 6:27 Kahro Raie [this message]
2004-10-29 7:00 ` Len Brown
2004-10-29 15:10 ` Maciej W. Rozycki
2004-10-29 11:24 ` linux-os
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041029062746.B69E312CE@portal.hot.ee \
--to=kahroo@hot.ee \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®