Linux version 2.4.26 (root@flash) (gcc version 2.95.3 20010315 (release)) #21 Thu Oct 28 22:37:07 CEST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f1dfc - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000002800000 (usable)
 BIOS-e820: 00000000ffff1dfc - 0000000100000000 (reserved)
40MB LOWMEM available.
On node 0 totalpages: 10240
zone(0): 4096 pages.
zone(1): 6144 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: root=/dev/hda1 rw reboot=fast BOOT_IMAGE=bzimage
Initializing CPU#0
Detected 165.787 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 330.95 BogoMIPS
Memory: 37496k/40960k available (1590k kernel code, 3076k reserved, 637k data, 112k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Intel Pentium with F0 0F bug - workaround enabled.
CPU:     After generic, caps: 000001bf 00000000 00000000 00000000
CPU:             Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
PCI: BIOS32 Service Directory structure at 0xc00fdba0
PCI: BIOS32 Service Directory entry at 0xf6e20
PCI: BIOS probe returned s=00 hw=01 ver=02.10 l=00
PCI: PCI BIOS revision 2.10 entry at 0xf7019, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Scanning bus 00
Found 00:00 [10b9/1521] 000600 00
PCI: Calling quirk c010fba8 for 00:00.0
PCI: Calling quirk c021b0a8 for 00:00.0
Found 00:10 [10b9/1523] 000601 00
PCI: Calling quirk c010fba8 for 00:02.0
PCI: Calling quirk c021b0a8 for 00:02.0
Found 00:11 [10b9/5219] 000101 00
PCI: Calling quirk c010fba8 for 00:02.1
PCI: IDE base address fixup for 00:02.1
PCI: Calling quirk c021b0a8 for 00:02.1
Found 00:20 [104c/ac12] 000607 02
PCI: Calling quirk c010fba8 for 00:04.0
PCI: Calling quirk c021b0a8 for 00:04.0
Found 00:21 [104c/ac12] 000607 02
PCI: Calling quirk c010fba8 for 00:04.1
PCI: Calling quirk c021b0a8 for 00:04.1
Found 00:30 [102c/00e0] 000300 00
PCI: Calling quirk c010fba8 for 00:06.0
PCI: Calling quirk c021b0a8 for 00:06.0
Fixups for bus 00
PCI: Scanning for ghost devices on bus 0
Scanning behind PCI bridge 00:04.0, config 050100, pass 0
Scanning behind PCI bridge 00:04.1, config 0a0600, pass 0
Scanning behind PCI bridge 00:04.0, config 050100, pass 1
Scanning behind PCI bridge 00:04.1, config 0a0600, pass 1
Bus scan for 00 returning with max=0a
PCI: IRQ init
PCI: Interrupt Routing Table found at 0xc00f7720
00:03 slot=01 0:02/def8 1:03/def8 2:04/def8 3:01/def8
00:04 slot=02 0:01/def8 1:02/def8 2:00/def8 3:00/def8
00:02 slot=00 0:00/0000 1:00/0000 2:00/0000 3:00/0000
00:06 slot=00 0:00/0000 1:00/0000 2:00/0000 3:00/0000
PCI: Attempting to find IRQ router for 0000:0000
PCI: Interrupt router not found at ff:ff. Aieee, do you have ALi chipset?
PCI: OK, found 10b9:1523. Let's playing a game!
PCI: Using IRQ router ALI [10b9/1523] at 00:02.0
PCI: IRQ fixup
00:04.0: ignoring bogus IRQ 255
00:04.1: ignoring bogus IRQ 255
IRQ for 00:02.1:0 -> not routed
IRQ for 00:04.0:0 -> PIRQ 01, mask def8, excl 0000 -> newirq=0 ... failed
IRQ for 00:04.1:1 -> PIRQ 02, mask def8, excl 0000 -> newirq=0 ... failed
PCI: Allocating resources
PCI: Resource 0000f000-0000f00f (f=101, d=0, p=0)
PCI: Resource fd000000-fdffffff (f=200, d=0, p=0)
  got res[10000000:10000fff] for resource 0 of Texas Instruments PCI1130
  got res[10001000:10001fff] for resource 0 of Texas Instruments PCI1130 (#2)
PCI: Sorting device list...
PCI: Calling quirk c0341b78 for 00:00.0
PCI: Calling quirk c034172c for 00:02.0
Activating ISA DMA hang workarounds.
PCI: Calling quirk c0341b78 for 00:02.0
PCI: Calling quirk c0341b78 for 00:02.1
PCI: Calling quirk c0341b78 for 00:04.0
PCI: Calling quirk c0341b78 for 00:04.1
PCI: Calling quirk c0341b78 for 00:06.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: TOSHIBA MK6017MAP, ATA DISK drive
hdc: UJDCD6700, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 11733120 sectors (6007 MB), CHS=776/240/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 6X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
Partition check:
 hda: hda1 hda4
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :    67.600 MB/sec
   32regs    :   106.800 MB/sec
raid5: using function: 32regs (106.800 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.8(17/11/2003)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
UMSDOS 0.86k (compatibility level 0.4, fast msdos)
check_pseudo_root: mounted as root
check_pseudo_root: found //linux
check_pseudo_root: found sbin/init, enabling pseudo-root
UMSDOS: changed to alternate root
VFS: Mounted root (umsdos filesystem).
Freeing unused kernel memory: 112k freed
Adding Swap: 32760k swap-space (priority -1)
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Databook TCIC-2 PCMCIA probe: not found.
IRQ for 00:04.0:0 -> PIRQ 01, mask def8, excl 0000 -> newirq=5 -> assigning IRQ 5 -> edge ... OK
PCI: Assigned IRQ 5 for device 00:04.0
IRQ for 00:04.1:1 -> PIRQ 02, mask def8, excl 0000 -> newirq=9 -> assigning IRQ 9 -> edge ... OK
PCI: Assigned IRQ 9 for device 00:04.1
spurious 8259A interrupt: IRQ7.
Yenta ISA IRQ mask 0x0c80, PCI irq 5
Socket status: 30000020
Yenta ISA IRQ mask 0x0c80, PCI irq 9
Socket status: 30000006
cs: cb_alloc(bus 1): vendor 0x10ec, device 0x8139
Found 01:00 [10ec/8139] 000200 00
  got res[4000:40ff] for resource 0 of PCI device 10ec:8139
  got res[10800000:108001ff] for resource 1 of PCI device 10ec:8139
PCI: Enabling device 01:00.0 (0000 -> 0003)
IRQ for 01:00.0:0 -> not found in routing table
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x178-0x17f 0x220-0x22f 0x378-0x37f 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
UMSDOS_notify_change: //linux not in EMD, ret=-2
8139too Fast Ethernet driver 0.9.26
IRQ for 01:00.0:0 -> not found in routing table
PCI: Enabling bus mastering for device 01:00.0
PCI: Setting latency timer of device 01:00.0 to 64
eth0: RealTek RTL8139 at 0xc3035000, 00:50:fc:b8:f7:fb, IRQ 5
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996
sb: No ISAPnP cards found, trying standard ones...
SB 3.01 detected OK (220)
ESS chip ES1688 detected
