mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Mile Davidovic" <mile.davidovic@micronasnit.com>
To: <linux-kernel@vger.kernel.org>
Subject: ITERaid and atkbd
Date: Tue, 16 Nov 2004 15:23:30 +0100	[thread overview]
Message-ID: <200411161427.iAGERt46031185@krt.neobee.net> (raw)

Hi folks

I have trouble with IT8212F raid controller (on Gigabyte boards also known
as GigaRaid) on FedoraCore 3.
There was some problem with building modules but after some fixing Makefile
I succeeded to build module. 

After loading module dmesg shows:
	Found Controller: IT8212 UDMA/ATA133 RAID Controller
	FindDevices: device 0 is IDE
	FindDevices: device 1 is IDE
	Channel[0] BM-DMA at 0xA400-0xA407
	Channel[1] BM-DMA at 0xA408-0xA40F
	scsi2 : ITE RAIDExpress133
	  Vendor: ITE       Model: IT8212F           Rev: 1.3
	  Type:   Direct-Access                      ANSI SCSI revision: 00
	SCSI device sdb: 488397166 512-byte hdwr sectors (250059 MB)
	sdb: asking for cache data failed
	sdb: assuming drive cache: write through
	 sdb: sdb1
	Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
	  Vendor: ITE       Model: IT8212F           Rev: 1.3
	  Type:   Direct-Access                      ANSI SCSI revision: 00
	SCSI device sdc: 488397166 512-byte hdwr sectors (250059 MB)
	sdc: asking for cache data failed
	sdc: assuming drive cache: write through
	 sdc:<4>atkbd.c: Unknown key pressed (translated set 2, code 0x0 on
isa0060/serio0).
	atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
	atkbd.c: Unknown key pressed (translated set 2, code 0x0 on
isa0060/serio0).
	atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
	 sdc1
	Attached scsi disk sdc at scsi2, channel 0, id 1, lun 0

[root@beowulf scsi]# mount /dev/sdb1 /mnt/
atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
...
atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
kjournald starting.  Commit interval 5 seconds
atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
atkbd.c: Unknown key pressed (translated set 2, code 0x0 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 00 <keycode>' to make it known.

I found a lot of messages with this subject but I didn't found any final
answer.
I also tried to use iteraid driver from mm tree but situation is same.

Thanks in a advice
Best regards Mile



             reply	other threads:[~2004-11-16 14:24 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-11-16 14:23 Mile Davidovic [this message]
2004-11-16 15:17 ` Rahul Karnik
2004-11-16 16:29   ` Mile Davidovic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200411161427.iAGERt46031185@krt.neobee.net \
    --to=mile.davidovic@micronasnit.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®