From: Jeff Dike <jdike@addtoit.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org,
Blaisorblade <blaisorblade_spam@yahoo.it>,
Bodo Stroesser <bstroesser@fujitsu-siemens.com>
Subject: [PATCH] UML - make vsyscall page into process page tables
Date: Fri, 03 Dec 2004 16:42:40 -0500 [thread overview]
Message-ID: <200412032142.iB3LgeZW004651@ccure.user-mode-linux.org> (raw)
>From Bodo Stroesser:
To make the vsyscall-page available for copy_from_user() and
ptrace(), we should use kernel's "gate-vma" mechanism.
Therefore we need a valid page structure. To have this, one
page (or more) is allocated at boot time, the contents of the
vsyscall-page is copied into this page and the page's pte is
inserted in swapper's pagetables.
Now it will be copied into the pagetables of all processes.
Note: this alone doesn't work, since FIXADDR_USER_START and
FIXADDR_USER_END are not yet defined correctly. Also
access_ok_skas() does not yet grant read accesses to
pages not in the normal user area.
Risks:
Please check the first hunk! I don't know, whether this change is OK.
Maybe fixrange_init() is wrong anyway with 3-level-pagetables?
Here access_ok_skas() and FIXADDR_USER_XXXX are fixed.
Now everything should work fine, while the processes are
running. But if a process crashes, the vsyscall-page will
not be dumped.
Signed-off-by: Bodo Stroesser <bodo.stroesser@fujitsu-siemens.com>
Signed-off-by: Jeff Dike <jdike@addtoit.com>
Index: 2.6.9/arch/um/kernel/mem.c
===================================================================
--- 2.6.9.orig/arch/um/kernel/mem.c 2004-12-03 12:21:11.000000000 -0500
+++ 2.6.9/arch/um/kernel/mem.c 2004-12-03 12:42:11.000000000 -0500
@@ -174,6 +174,29 @@
}
#endif /* CONFIG_HIGHMEM */
+static void __init fixaddr_user_init( void)
+{
+ long size = FIXADDR_USER_END - FIXADDR_USER_START;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ unsigned long paddr, vaddr = FIXADDR_USER_START;
+
+ if ( ! size )
+ return;
+
+ fixrange_init( FIXADDR_USER_START, FIXADDR_USER_END, swapper_pg_dir);
+ paddr = (unsigned long)alloc_bootmem_low_pages( size);
+ memcpy( (void *)paddr, (void *)FIXADDR_USER_START, size);
+ paddr = __pa(paddr);
+ for ( ; size > 0; size-=PAGE_SIZE, vaddr+=PAGE_SIZE, paddr+=PAGE_SIZE) {
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ pmd = pmd_offset(pgd, vaddr);
+ pte = pte_offset_kernel(pmd, vaddr);
+ pte_set_val( (*pte), paddr, PAGE_READONLY);
+ }
+}
+
void paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES], vaddr;
@@ -194,6 +217,8 @@
vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
fixrange_init(vaddr, FIXADDR_TOP, swapper_pg_dir);
+ fixaddr_user_init();
+
#ifdef CONFIG_HIGHMEM
init_highmem();
#endif
Index: 2.6.9/arch/um/kernel/skas/include/uaccess-skas.h
===================================================================
--- 2.6.9.orig/arch/um/kernel/skas/include/uaccess-skas.h 2004-12-03 12:21:11.000000000 -0500
+++ 2.6.9/arch/um/kernel/skas/include/uaccess-skas.h 2004-12-03 12:42:11.000000000 -0500
@@ -7,11 +7,16 @@
#define __SKAS_UACCESS_H
#include "asm/errno.h"
+#include "asm/fixmap.h"
#define access_ok_skas(type, addr, size) \
((segment_eq(get_fs(), KERNEL_DS)) || \
(((unsigned long) (addr) < TASK_SIZE) && \
- ((unsigned long) (addr) + (size) <= TASK_SIZE)))
+ ((unsigned long) (addr) + (size) <= TASK_SIZE)) || \
+ ((type == VERIFY_READ ) && \
+ (size <= (FIXADDR_USER_END - FIXADDR_USER_START)) && \
+ ((unsigned long) (addr) >= FIXADDR_USER_START) && \
+ ((unsigned long) (addr) + (size) <= FIXADDR_USER_END)))
static inline int verify_area_skas(int type, const void * addr,
unsigned long size)
Index: 2.6.9/include/asm-um/fixmap.h
===================================================================
--- 2.6.9.orig/include/asm-um/fixmap.h 2004-12-03 12:21:11.000000000 -0500
+++ 2.6.9/include/asm-um/fixmap.h 2004-12-03 12:23:03.000000000 -0500
@@ -3,6 +3,7 @@
#include <linux/config.h>
#include <asm/kmap_types.h>
+#include <asm/archparam.h>
/*
* Here we define all the compile-time 'special' virtual
@@ -34,7 +35,6 @@
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
#endif
- FIX_VSYSCALL,
__end_of_fixed_addresses
};
@@ -68,8 +68,8 @@
* This is the range that is readable by user mode, and things
* acting like user mode such as get_user_pages.
*/
-#define FIXADDR_USER_START (__fix_to_virt(FIX_VSYSCALL))
-#define FIXADDR_USER_END (FIXADDR_USER_START + PAGE_SIZE)
+#define FIXADDR_USER_START VSYSCALL_BASE
+#define FIXADDR_USER_END VSYSCALL_END
extern void __this_fixmap_does_not_exist(void);
Index: 2.6.9/include/asm-um/pgtable.h
===================================================================
--- 2.6.9.orig/include/asm-um/pgtable.h 2004-12-01 23:43:12.000000000 -0500
+++ 2.6.9/include/asm-um/pgtable.h 2004-12-03 12:38:49.000000000 -0500
@@ -355,6 +355,8 @@
extern pte_t mk_pte(struct page *page, pgprot_t pgprot);
+#define pte_set_val(p, phys, prot) pte_val(p) = (phys | pgprot_val(prot))
+
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
reply other threads:[~2004-12-03 19:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200412032142.iB3LgeZW004651@ccure.user-mode-linux.org \
--to=jdike@addtoit.com \
--cc=akpm@osdl.org \
--cc=blaisorblade_spam@yahoo.it \
--cc=bstroesser@fujitsu-siemens.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®