On Sat, Jan 01, 2005 at 09:57:53PM -0800, Barry K. Nathan wrote:
> > e100 does not help, fault is not in e100]. Are you running with APIC
> > enabled? Try noapic. Try acpi=off.
> Reloading doesn't help, with either e100 or 8139too. I forgot to 
> mention
> that in my other e-mail in this thread. (As I previously mentioned, 
> on
> my system with 8139too, noapic makes matters worse, and the problem 
> goes
> away if I use *either* pci=routeirq or acpi=off. I haven't tried 
> using
> both.)

pci=routeirq worked for me to get my e100 working again after resume.

so what's that mean?  what's the trade-off for using this option?

thanks for the guidance.
-- 
John M Flinchbaugh
john@hjsoft.com