From: Vojtech Pavlik <vojtech@suse.de>
To: Dmitry Torokhov <dtor_core@ameritech.net>
Cc: linux-input@atrey.karlin.mff.cuni.cz,
linux-kernel@vger.kernel.org, zhilla <zhilla@spymac.com>,
Victor Hahn <victorhahn@web.de>
Subject: Re: [RFC/RFT] Better handling of bad xfers/interrupt delays in psmouse
Date: Sat, 5 Feb 2005 22:11:36 +0100 [thread overview]
Message-ID: <20050205211136.GB8451@ucw.cz> (raw)
In-Reply-To: <200502051448.57492.dtor_core@ameritech.net>
On Sat, Feb 05, 2005 at 02:48:56PM -0500, Dmitry Torokhov wrote:
> Hi,
>
> The patch below attempts to better handle situation when psmouse interrupt
> is delayed for more than 0.5 sec by requesting a resend. This will allow
> properly synchronize with the beginning of the packet as mouse is supposed
> to resend entire package.
Have you actually tested the mouse is really sending the whole packet?
I'd suspect it could just resend the last byte. :I Maybe using the
GET_PACKET command would be more useful in this case.
Also, we could use GET_PACKET to check the mode of the mouse, when we
get several successive lost bytes.
> Additionally, psmouse will also request resend if KBC indicates parity or
> timeout errors.
>
> The patch should apply to 2.6.11-rc2+. A version of this patch for 2.6.10
> is available here:
>
> http://www.geocities.com/dt_or/input/2_6_10/
>
> --
> Dmitry
>
>
> ===================================================================
>
>
> ChangeSet@1.2006, 2005-02-05 14:33:05-05:00, dtor_core@ameritech.net
> Input: psmouse - better handle bad transfers and interrupt delays
> by requesting resend of the last packet so we don't need to
> guess if received byte is remainder of last packet or start
> of a new one.
>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
>
>
> psmouse-base.c | 48 +++++++++++++++++++++++++++++++++++++++++++-----
> psmouse.h | 2 ++
> 2 files changed, 45 insertions(+), 5 deletions(-)
>
>
> ===================================================================
>
>
>
> diff -Nru a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
> --- a/drivers/input/mouse/psmouse-base.c 2005-02-05 14:37:51 -05:00
> +++ b/drivers/input/mouse/psmouse-base.c 2005-02-05 14:37:51 -05:00
> @@ -134,6 +134,42 @@
> return PSMOUSE_FULL_PACKET;
> }
>
> +static void psmouse_handle_bad_xfer(struct psmouse *psmouse, unsigned int flags)
> +{
> + if (psmouse->state == PSMOUSE_ACTIVATED)
> + printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
> + flags & SERIO_TIMEOUT ? " timeout" : "",
> + flags & SERIO_PARITY ? " bad parity" : "");
> +
> + if (!psmouse->resend) {
> + /*
> + * This is first error. Try to request resend but not if we got
> + * timeout and we are in initialize phase - there most likely no
> + * mouse at all.
> + */
> + if (psmouse->state > PSMOUSE_INITIALIZING || (~flags & SERIO_TIMEOUT)) {
> + if (serio_write(psmouse->ps2dev.serio, PSMOUSE_CMD_RESEND) == 0) {
> + psmouse->resend = 1;
> + psmouse->pktcnt = 0;
> + }
> + }
> + } else {
> + /*
> + * This is second error in a row. If mouse was itialized - attempt
> + * to rconnect, otherwise just signal failure.
> + */
> + psmouse->resend = 0;
> + if (psmouse->state > PSMOUSE_INITIALIZING) {
> + psmouse->state = PSMOUSE_IGNORE;
> + printk(KERN_NOTICE "psmouse.c: issuing reconnect request\n");
> + serio_reconnect(psmouse->ps2dev.serio);
> + }
> + }
> +
> + if (!psmouse->resend)
> + ps2_cmd_aborted(&psmouse->ps2dev);
> +}
> +
> /*
> * psmouse_interrupt() handles incoming characters, either gathering them into
> * packets or passing them to the command routine as command output.
> @@ -149,11 +185,7 @@
> goto out;
>
> if (flags & (SERIO_PARITY|SERIO_TIMEOUT)) {
> - if (psmouse->state == PSMOUSE_ACTIVATED)
> - printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
> - flags & SERIO_TIMEOUT ? " timeout" : "",
> - flags & SERIO_PARITY ? " bad parity" : "");
> - ps2_cmd_aborted(&psmouse->ps2dev);
> + psmouse_handle_bad_xfer(psmouse, flags);
> goto out;
> }
>
> @@ -168,11 +200,17 @@
> if (psmouse->state == PSMOUSE_INITIALIZING)
> goto out;
>
> + psmouse->resend = 0;
> +
> if (psmouse->state == PSMOUSE_ACTIVATED &&
> psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) {
> printk(KERN_WARNING "psmouse.c: %s at %s lost synchronization, throwing %d bytes away.\n",
> psmouse->name, psmouse->phys, psmouse->pktcnt);
> psmouse->pktcnt = 0;
> + if (serio_write(serio, PSMOUSE_CMD_RESEND) == 0) {
> + psmouse->resend = 1;
> + goto out;
> + }
> }
>
> psmouse->last = jiffies;
> diff -Nru a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
> --- a/drivers/input/mouse/psmouse.h 2005-02-05 14:37:51 -05:00
> +++ b/drivers/input/mouse/psmouse.h 2005-02-05 14:37:51 -05:00
> @@ -13,6 +13,7 @@
> #define PSMOUSE_CMD_ENABLE 0x00f4
> #define PSMOUSE_CMD_DISABLE 0x00f5
> #define PSMOUSE_CMD_RESET_DIS 0x00f6
> +#define PSMOUSE_CMD_RESEND 0x00fe
> #define PSMOUSE_CMD_RESET_BAT 0x02ff
>
> #define PSMOUSE_RET_BAT 0xaa
> @@ -48,6 +49,7 @@
> unsigned long last;
> unsigned long out_of_sync;
> enum psmouse_state state;
> + unsigned int resend;
> char devname[64];
> char phys[32];
>
>
>
--
Vojtech Pavlik
SuSE Labs, SuSE CR
next prev parent reply other threads:[~2005-02-05 21:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-05 19:48 Dmitry Torokhov
2005-02-05 21:11 ` Vojtech Pavlik [this message]
2005-02-06 5:29 ` Dmitry Torokhov
2005-02-06 7:23 ` Dmitry Torokhov
2005-02-06 8:37 ` Vojtech Pavlik
2005-02-06 17:52 ` Dmitry Torokhov
2005-02-06 8:29 ` Vojtech Pavlik
2005-02-06 9:27 ` Pavel Machek
2005-02-06 17:55 ` Dmitry Torokhov
2005-02-07 5:31 ` Ryan Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050205211136.GB8451@ucw.cz \
--to=vojtech@suse.de \
--cc=dtor_core@ameritech.net \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=victorhahn@web.de \
--cc=zhilla@spymac.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®