From: Tejun Heo <htejun@gmail.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
lkml <linux-kernel@vger.kernel.org>,
linux-ide <linux-ide@vger.kernel.org>,
Jeff Garzik <jgarzik@pobox.com>
Subject: Re: [PATCH 2.6.11-rc3 04/11] ide: removes unneeded HOB access using ATA_TFLAG_LBA48 flag
Date: Thu, 10 Feb 2005 17:38:29 +0900 (KST) [thread overview]
Message-ID: <20050210083824.97E549BE@htj.dyndns.org> (raw)
In-Reply-To: <20050210083808.48E9DD1A@htj.dyndns.org>
04_ide_ATA_TFLAG_LBA48.patch
This small patch fixes unneeded writes/reads to LBA48 taskfile
registers on LBA48 capable disks for following cases:
* Power Management requests
(WIN_FLUSH_CACHE[_EXT], WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands)
* special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT)
* Host Protected Area support (WIN_READ_NATIVE_MAX, WIN_SET_MAX)
* /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE,
SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands)
* write cache enabling/disabling in ide-disk
(WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE)
* write cache flushing in ide-disk (WIN_FLUSH_CACHE[_EXT])
* acoustic management in ide-disk
(WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM)
* door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK)
* /proc/ide/hd?/identify support (WIN_IDENTIFY)
Patch adds 'unsinged long flags' to ide_task_t and uses
ATA_TFLAG_LBA48 flag (from <linux/ata.h>) to indicate need of
accessing LBA48 taskfile registers.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
drivers/ide/ide-disk.c | 6 ++++++
drivers/ide/ide-io.c | 2 +-
drivers/ide/ide-taskfile.c | 7 +++++--
include/linux/ide.h | 1 +
4 files changed, 13 insertions(+), 3 deletions(-)
Index: linux-ide/drivers/ide/ide-disk.c
===================================================================
--- linux-ide.orig/drivers/ide/ide-disk.c 2005-02-10 17:31:48.698694939 +0900
+++ linux-ide/drivers/ide/ide-disk.c 2005-02-10 17:38:01.169901379 +0900
@@ -362,6 +362,9 @@ static unsigned long long idedisk_read_n
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_READ_NATIVE_MAX_EXT;
args.command_type = IDE_DRIVE_TASK_NO_DATA;
args.handler = &task_no_data_intr;
+
+ args.flags |= ATA_TFLAG_LBA48;
+
/* submit command request */
ide_raw_taskfile(drive, &args, NULL);
@@ -431,6 +434,9 @@ static unsigned long long idedisk_set_ma
args.hobRegister[IDE_CONTROL_OFFSET_HOB]= (drive->ctl|0x80);
args.command_type = IDE_DRIVE_TASK_NO_DATA;
args.handler = &task_no_data_intr;
+
+ args.flags |= ATA_TFLAG_LBA48;
+
/* submit command request */
ide_raw_taskfile(drive, &args, NULL);
/* if OK, compute maximum address value */
Index: linux-ide/drivers/ide/ide-io.c
===================================================================
--- linux-ide.orig/drivers/ide/ide-io.c 2005-02-10 17:38:00.436024471 +0900
+++ linux-ide/drivers/ide/ide-io.c 2005-02-10 17:38:01.171901044 +0900
@@ -487,7 +487,7 @@ void ide_end_drive_cmd (ide_drive_t *dri
args->tfRegister[IDE_SELECT_OFFSET] = hwif->INB(IDE_SELECT_REG);
args->tfRegister[IDE_STATUS_OFFSET] = stat;
- if (drive->addressing == 1) {
+ if (args->flags & ATA_TFLAG_LBA48) {
hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG);
args->hobRegister[IDE_FEATURE_OFFSET] = hwif->INB(IDE_FEATURE_REG);
args->hobRegister[IDE_NSECTOR_OFFSET] = hwif->INB(IDE_NSECTOR_REG);
Index: linux-ide/drivers/ide/ide-taskfile.c
===================================================================
--- linux-ide.orig/drivers/ide/ide-taskfile.c 2005-02-10 17:38:00.832957893 +0900
+++ linux-ide/drivers/ide/ide-taskfile.c 2005-02-10 17:38:01.172900876 +0900
@@ -101,7 +101,7 @@ ide_startstop_t do_rw_taskfile (ide_driv
ide_hwif_t *hwif = HWIF(drive);
task_struct_t *taskfile = (task_struct_t *) task->tfRegister;
hob_struct_t *hobfile = (hob_struct_t *) task->hobRegister;
- u8 HIHI = (drive->addressing == 1) ? 0xE0 : 0xEF;
+ u8 HIHI = (task->flags & ATA_TFLAG_LBA48) ? 0xE0 : 0xEF;
/* ALL Command Block Executions SHALL clear nIEN, unless otherwise */
if (IDE_CONTROL_REG) {
@@ -110,7 +110,7 @@ ide_startstop_t do_rw_taskfile (ide_driv
}
SELECT_MASK(drive, 0);
- if (drive->addressing == 1) {
+ if (task->flags & ATA_TFLAG_LBA48) {
hwif->OUTB(hobfile->feature, IDE_FEATURE_REG);
hwif->OUTB(hobfile->sector_count, IDE_NSECTOR_REG);
hwif->OUTB(hobfile->sector_number, IDE_SECTOR_REG);
@@ -573,6 +573,9 @@ int ide_taskfile_ioctl (ide_drive_t *dri
args.data_phase = req_task->data_phase;
args.command_type = req_task->req_cmd;
+ if (drive->addressing == 1)
+ args.flags |= ATA_TFLAG_LBA48;
+
drive->io_32bit = 0;
switch(req_task->data_phase) {
case TASKFILE_OUT_DMAQ:
Index: linux-ide/include/linux/ide.h
===================================================================
--- linux-ide.orig/include/linux/ide.h 2005-02-10 17:38:00.044090212 +0900
+++ linux-ide/include/linux/ide.h 2005-02-10 17:38:01.174900541 +0900
@@ -1258,6 +1258,7 @@ typedef struct ide_task_s {
* struct hd_drive_hob_hdr hobf;
* hob_struct_t hobf;
*/
+ unsigned long flags; /* ATA_TFLAG_xxx */
task_ioreg_t tfRegister[8];
task_ioreg_t hobRegister[8];
ide_reg_valid_t tf_out_flags;
next prev parent reply other threads:[~2005-02-10 8:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-10 8:38 [PATCH 2.6.11-rc3 00/11] ide: ide driver updates series 2, round 2 Tejun Heo
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 01/11] ide: task_end_request() fix Tejun Heo
2005-02-24 15:58 ` Bartlomiej Zolnierkiewicz
2005-02-27 6:49 ` Tejun Heo
2005-03-01 14:30 ` Bartlomiej Zolnierkiewicz
2005-03-01 16:49 ` Tejun Heo
2005-03-02 16:15 ` Bartlomiej Zolnierkiewicz
2005-03-02 5:56 ` Jeff Garzik
2005-03-02 16:07 ` Bartlomiej Zolnierkiewicz
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 02/11] ide: ide_init_drive_cmd() now defaults to REQ_DRIVE_TASKFILE Tejun Heo
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 03/11] ide: ide_diag_taskfile() rq initialization fix Tejun Heo
2005-02-10 8:38 ` Tejun Heo [this message]
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 05/11] ide: fixes io_32bit race in ide_taskfile_ioctl() Tejun Heo
2005-02-11 21:16 ` Bartlomiej Zolnierkiewicz
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 06/11] ide: make disk flush functions use TASKFILE instead of TASK Tejun Heo
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 07/11] ide: make ide_task_ioctl() use TASKFILE Tejun Heo
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 08/11] ide: remove REQ_DRIVE_TASK handling Tejun Heo
2005-02-24 15:45 ` Bartlomiej Zolnierkiewicz
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 09/11] ide: convert uses of REQ_DRIVE_CMD to REQ_DRIVE_TASKFILE Tejun Heo
2005-02-10 8:38 ` [PATCH 2.6.11-rc3 10/11] ide: make ide_cmd_ioctl() use TASKFILE Tejun Heo
2005-02-24 15:50 ` Bartlomiej Zolnierkiewicz
2005-02-27 6:53 ` Tejun Heo
2005-02-27 7:41 ` Jeff Garzik
2005-02-10 8:39 ` [PATCH 2.6.11-rc3 11/11] ide: remove REQ_DRIVE_CMD handling Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050210083824.97E549BE@htj.dyndns.org \
--to=htejun@gmail.com \
--cc=bzolnier@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®