Re: [rfc/rft] Fujitsu B-Series Lifebook PS/2 TouchScreen driver

[Vojtech Pavlik <vojtech@suse.cz>]

On Sun, Feb 13, 2005 at 01:49:10AM -0500, Dmitry Torokhov wrote:

> On Friday 11 February 2005 15:10, Vojtech Pavlik wrote:
> > +       if (set_properties) {
> > +               psmouse->vendor = "Fujitsu Lifebook";
> > +               psmouse->name = "TouchScreen";
> > +       }
> > +
> > +       psmouse->dev.evbit[0] = BIT(EV_ABS) | BIT(EV_KEY) | BIT(EV_REL);
> > +       psmouse->dev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_MIDDLE) | BIT(BTN_RIGHT);
> > +       psmouse->dev.keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
> > +       psmouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
> > +       input_set_abs_params(&psmouse->dev, ABS_X, 130, 885, 0, 0);
> > +       input_set_abs_params(&psmouse->dev, ABS_Y, 272, 830, 0, 0);
> > +
> > +       psmouse->protocol_handler = lifebook_process_byte;
> > +       psmouse->disconnect = lifebook_disconnect;
> > +       psmouse->reconnect = lifebook_reconnect;
> > +       psmouse->pktsize = 3;
> > 
> 
> Hi Vojtech,
> 
> I have been trying not alter kernel state in probe routines (still has
> to touch hardware for mice that do not have separate detection routine)
> unless set_properties is set. So all of the above should be in 
> "if (set_properties)" statement.

Ok, I updated the patch.

-- 
Vojtech Pavlik
SuSE Labs, SuSE CR