From: "Stefan Dösinger" <stefandoesinger@gmx.at>
To: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2005@gmx.net>
Cc: acpi-devel@lists.sourceforge.net,
Stefan Schweizer <sschweizer@gmail.com>,
Pavel Machek <pavel@suse.cz>,
kernel list <linux-kernel@vger.kernel.org>,
seife@suse.de, rjw@sisk.pl
Subject: Re: [ACPI] Call for help: list of machines with working S3
Date: Wed, 16 Feb 2005 20:26:53 +0100 [thread overview]
Message-ID: <200502162026.54992.stefandoesinger@gmx.at> (raw)
In-Reply-To: <42136158.5000906@gmx.net>
Am Mittwoch, 16. Februar 2005 16:06 schrieb Carl-Daniel Hailfinger:
> Stefan Dösinger schrieb:
> >>The problems with this patch are:
> >>- you need to press a key to come back from the "resume-console" after
> >>resume. - DRI in X does not work (at least for me with intel-agp, others
> >>reportet it works)
> >>I just disabloed it by not loading intel-agp (hotplug-blacklist)
> >
> > You can force the radeon X driver to use pci mode by setting Option
> > "ForcePciMode" to "true" or something simmilar in you X config file. This
> > way you can get dri without intel-agp. This is much slower, but enought
> > to play tuxracer ;-)
>
> How do I enable DRI with my card to test that crash? I have the
> following in my XF86Config:
>
> Section "DRI"
> Group "video"
> Mode 0660
> EndSection
>
> but nothing else about DRI. So do I have to change something in
> my configuration?
>
> Oh, and could you please include run "lspci -vv" and include the
> part about VGA compatible controller in your mail? I have some
> hypothesis about the settings there having to do with resume.
You can set
Option "BusType" "PCI" in your cards driver section in xorg.conf / XF86Config.
With this setting you should get DRI without having intel-agp loaded(if the
rest is set up correctly)
My lspci output is:
0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev
03)
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable)
Capabilities: [e4] #09 [f104]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+
Rate=x4
0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev
03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: d8000000-dfffffff
Expansion ROM at 00003000 [disabled] [size=4K]
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at 1800 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1820 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 4: I/O ports at 1840 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI
Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 0: Memory at d0000000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] #0a [2080]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 Mobile PCI Bridge (rev 83) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR+
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0200000-d05fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM (ICH4-M) LPC Interface Bridge
(rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4-M) IDE Controller (rev
03) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at 1880 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 1c00
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at d0000800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97
Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 10
Region 0: I/O ports at 2400
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf
[FireGL 9000] (rev 01) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8000000 (32-bit, prefetchable)
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+
Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:02.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev
01)
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0204000 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:02:04.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI
Adapter (rev 04)
Subsystem: Intel Corp. MIM2000/Centrino
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 8500ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0206000 (32-bit, non-prefetchable)
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M1 SmartCardBus MultiMediaBay
Controller (rev 20)
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin A routed to IRQ 255
Region 0: Memory at d0207000 (32-bit, non-prefetchable)
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: d0400000-d04ff000 (prefetchable)
Memory window 1: d0300000-d03ff000 (prefetchable)
I/O window 0: 00004400-000044ff
I/O window 1: 00004000-000040ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite-
16-bit legacy interface ports at 0001
0000:02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M1 SmartCardBus MultiMediaBay
Controller (rev 20)
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 20001000 (32-bit, non-prefetchable) [disabled]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
I/O window 0: 00000000-00000003 [disabled]
I/O window 1: 00000000-00000003 [disabled]
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite-
16-bit legacy interface ports at 0001
0000:02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay
Accelerator
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0208000 (32-bit, non-prefetchable)
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 001f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d0209000 (32-bit, non-prefetchable)
Region 1: Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
The device entry in xorg.conf:
Section "Device"
# vendor=1002, device=4c66
Identifier "Card0"
Driver "radeon"
Option "AGPMode" "4"
#Option "EnablePageFlip" "1"
#Option "DynamicClocks" "1"
Option "dpms" "1"
BusID "PCI:1:0:0"
EndSection
S3 is working fine for me with dri and agp.
Stefan
next prev parent reply other threads:[~2005-02-16 19:20 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-14 21:11 Pavel Machek
2005-02-14 21:36 ` [ACPI] " Carl-Daniel Hailfinger
2005-02-14 23:23 ` Matthew Garrett
2005-02-14 23:47 ` Matthew Garrett
2005-02-15 6:05 ` Alistair John Strachan
2005-02-15 12:12 ` [ACPI] " Lorenzo Colitti
2005-02-15 13:17 ` Alistair John Strachan
2005-02-15 16:07 ` Lorenzo Colitti
2005-02-15 15:41 ` Matthew Garrett
2005-02-15 16:15 ` Lorenzo Colitti
2005-02-15 16:16 ` Lorenzo Colitti
2005-02-15 17:42 ` Alistair John Strachan
2005-02-15 20:43 ` Matthew Garrett
2005-02-15 21:09 ` Lorenzo Colitti
2005-02-16 1:41 ` Alistair John Strachan
2005-02-16 1:54 ` Pavel Machek
2005-02-16 2:47 ` Nigel Cunningham
2005-02-16 8:30 ` Romano Giannetti
2005-02-16 14:25 ` Kjartan Maraas
2005-02-18 20:49 ` Alistair John Strachan
2005-02-20 9:21 ` Luca Capello
2005-02-21 14:25 ` Kjartan Maraas
2005-02-22 14:33 ` Karol Kozimor
2005-02-15 16:05 ` Stefan Seyfried
2005-02-15 12:55 ` [ACPI] " Norbert Preining
2005-02-15 13:17 ` Karol Kozimor
2005-02-15 16:09 ` Carl-Daniel Hailfinger
2005-02-15 17:08 ` Norbert Preining
2005-02-15 18:57 ` Carl-Daniel Hailfinger
2005-02-15 20:21 ` Matthew Garrett
2005-02-15 22:40 ` Carl-Daniel Hailfinger
2005-02-16 9:51 ` Norbert Preining
2005-02-15 19:37 ` Stefan Dösinger
2005-02-17 11:06 ` Norbert Preining
2005-02-17 19:08 ` Norbert Preining
2005-02-17 20:58 ` Stefan Dösinger
2005-02-18 10:46 ` Norbert Preining
2005-02-18 13:38 ` Norbert Preining
2005-02-18 18:04 ` Stefan Dösinger
2005-02-15 19:47 ` Pavel Machek
2005-02-17 19:09 ` Norbert Preining
2005-02-16 9:34 ` Romano Giannetti
2005-02-16 14:54 ` Carl-Daniel Hailfinger
2005-02-16 16:10 ` Romano Giannetti
2005-02-22 22:08 ` Karol Kozimor
2005-02-24 12:37 ` Norbert Preining
2005-02-24 21:36 ` Karol Kozimor
2005-02-25 17:50 ` Proinnsias Breathnach
2005-02-27 16:57 ` Pavel Machek
2005-02-27 18:04 ` Stefan Seyfried
2005-02-15 16:31 ` Vernon Mauery
2005-02-15 21:28 ` Henrik Brix Andersen
2005-02-16 5:54 ` Stefan Schweizer
2005-02-16 8:48 ` Stefan Dösinger
2005-02-16 15:06 ` Carl-Daniel Hailfinger
2005-02-16 17:43 ` Stefan Schweizer
2005-02-16 19:26 ` Stefan Dösinger [this message]
2005-02-17 6:16 ` Len Brown
2005-02-17 10:15 ` Vojtech Pavlik
2005-02-17 23:12 ` Len Brown
2005-02-17 11:00 ` Matthew Garrett
2005-02-17 16:18 ` Carl-Daniel Hailfinger
2005-02-17 16:44 ` Vernon Mauery
2005-02-17 20:13 ` Carl-Daniel Hailfinger
2005-02-17 19:54 ` Pavel Machek
2005-02-17 20:34 ` Carl-Daniel Hailfinger
2005-02-17 20:42 ` Pavel Machek
2005-02-17 11:02 ` Pavel Machek
2005-02-17 23:19 ` Luca Capello
2005-02-23 19:30 ` Nish Aravamudan
2005-03-02 10:24 ` Stefan Seyfried
2005-03-02 10:57 ` Stefan Seyfried
2005-03-03 16:51 ` Stefan Seyfried
2005-03-03 17:49 ` Avuton Olrich
2005-03-14 6:19 ` Jan De Luyck
2005-03-14 8:00 ` Pavel Machek
2005-03-14 14:39 ` Jan De Luyck
2005-03-15 8:10 ` [ACPI] " Li Shaohua
2005-03-15 11:34 ` Nigel Cunningham
2005-03-15 12:04 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200502162026.54992.stefandoesinger@gmx.at \
--to=stefandoesinger@gmx.at \
--cc=acpi-devel@lists.sourceforge.net \
--cc=c-d.hailfinger.devel.2005@gmx.net \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@suse.cz \
--cc=rjw@sisk.pl \
--cc=seife@suse.de \
--cc=sschweizer@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®