Linux version 2.6.11-rc4-RT-V0.7.39-02 (root@venkman) (gcc version 3.4.3 20050110 (Gentoo Linux 3.4.3.20050110, ssp-3.4.3.20050110-0, pie-8.7.7)) #1 Fri Feb 25 19:15:16 ART 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.1 present. ACPI: RSDP (v000 VIA694 ) @ 0x000f7e90 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Built 1 zonelists Kernel command line: elevator=cfq vga=0x030c Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01401000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1000.243 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 132x60 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 516976k/524224k available (1198k kernel code, 6700k reserved, 306k data, 120k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1978.36 BogoMIPS (lpj=989184) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0080 (from 0ca0) spawn_desched_task(00000000) desched cpu_callback 3/00000000 ksoftirqd started up. softirq RT prio: 24. desched cpu_callback 2/00000000 desched thread 0 started up. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb4b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050125 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 7 devices PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) PCI: Disabling Via external APIC routing pci_hotplug: PCI Hot Plug PCI Core version: 0.5 io scheduler noop registered io scheduler cfq registered (default) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... hdc: QUANTUM FIREBALLP AS20.5, ATA DISK drive hdd: ST330630A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 128KiB hdc: 40132503 sectors (20547 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(100) hdc: cache flushes not supported hdc: hdc1 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 > hdd: max request size: 128KiB hdd: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=59303/16/63, UDMA(66) hdd: cache flushes not supported hdd: hdd1 md: raid0 personality registered as nr 2 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) md: Autodetecting RAID arrays. md: autorun ... md: considering hdd1 ... md: adding hdd1 ... md: adding hdc10 ... md: created md0 md: bind md: bind md: running: md0: setting max_sectors to 64, segment boundary to 16383 raid0: looking at hdd1 raid0: comparing hdd1(29880768) with hdd1(29880768) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at hdc10 raid0: comparing hdc10(17470592) with hdd1(29880768) raid0: NOT EQUAL raid0: comparing hdc10(17470592) with hdc10(17470592) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 1 raid0: checking hdd1 ... contained as device 0 (29880768) is smallest!. raid0: checking hdc10 ... nope. raid0: zone->nb_dev: 1, size: 12410176 raid0: current zone offset: 29880768 raid0: done. raid0 : md_size is 47351360 blocks. raid0 : conf->hash_spacing is 34941184 blocks. raid0 : nb_zone is 2. raid0 : Allocating 8 bytes for hash. md: ... autorun DONE. ReiserFS: hdc9: found reiserfs format "3.6" with standard journal ReiserFS: hdc9: using ordered data mode ReiserFS: hdc9: journal params: device hdc9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc9: checking transaction log (hdc9) ReiserFS: hdc9: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 120k freed NET: Registered protocol family 1 Adding 265032k swap on /dev/discs/disc0/part6. Priority:-1 extents:1 Non-volatile memory driver v1.2 Real Time Clock Driver v1.12 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: irq 11, io base 0xd400 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 usb 1-2: new low speed USB device using uhci_hcd and address 3 input: USB HID v1.10 Keyboard [DARFON USB Composite Keyboard] on usb-0000:00:07.2-1 input: USB HID v1.10 Device [DARFON USB Composite Keyboard] on usb-0000:00:07.2-1 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Explorer] on usb-0000:00:07.2-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PCI: 0000:00:0c.0 has unsupported PM cap regs version (1) ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 11 (level, low) -> IRQ 11 loop: loaded (max 8 devices) Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xd8000000 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6629 Wed Nov 3 13:12:51 PST 2004 ReiserFS: hdc7: found reiserfs format "3.6" with standard journal ReiserFS: hdc7: using ordered data mode ReiserFS: hdc7: journal params: device hdc7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc7: checking transaction log (hdc7) ReiserFS: hdc7: Using r5 hash to sort names ReiserFS: hdc8: found reiserfs format "3.6" with standard journal ReiserFS: hdc8: using ordered data mode ReiserFS: hdc8: journal params: device hdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hdc8: checking transaction log (hdc8) ReiserFS: hdc8: Using r5 hash to sort names SGI XFS with ACLs, security attributes, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem md0 Ending clean XFS mount for filesystem: md0 Adding 262136k swap on /home/.swap. Priority:-2 extents:2 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5 eth0: RealTek RTL8139 at 0xdc00, 00:e0:7d:9f:1f:90, IRQ 5 eth0: Identified 8139 chip type 'RTL-8139C' NET: Registered protocol family 17 eth0: link up, 10Mbps, half-duplex, lpa 0x0000 nfs warning: mount version older than kernel nfs warning: mount version older than kernel agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode NVRM: rm_init_adapter failed