From: domen@coderock.org
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org, domen@coderock.org, nacc@us.ibm.com
Subject: [patch 06/14] 16/34: char/istallion: replace interruptible_sleep_on() with wait_event_interruptible()
Date: Sun, 06 Mar 2005 23:36:33 +0100 [thread overview]
Message-ID: <20050306223633.B13171EFA4@trashy.coderock.org> (raw)
Use wait_event_interruptible() instead of the deprecated
interruptible_sleep_on(). The replacements were all straight-forward as every
sleep was conditionally-looped. Patch is compile-tested (still warns about
{save,restore}_flags(),cli()).
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
---
kj-domen/drivers/char/istallion.c | 76 ++++++++++++++++----------------------
1 files changed, 33 insertions(+), 43 deletions(-)
diff -puN drivers/char/istallion.c~int_sleep_on-drivers_char_istallion drivers/char/istallion.c
--- kj/drivers/char/istallion.c~int_sleep_on-drivers_char_istallion 2005-03-05 16:11:34.000000000 +0100
+++ kj-domen/drivers/char/istallion.c 2005-03-05 16:11:34.000000000 +0100
@@ -41,6 +41,7 @@
#include <linux/init.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/device.h>
+#include <linux/wait.h>
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -1068,11 +1069,10 @@ static int stli_open(struct tty_struct *
tty->driver_data = portp;
portp->refcount++;
- while (test_bit(ST_INITIALIZING, &portp->state)) {
- if (signal_pending(current))
- return(-ERESTARTSYS);
- interruptible_sleep_on(&portp->raw_wait);
- }
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_INITIALIZING, &portp->state));
+ if (signal_pending(current))
+ return(-ERESTARTSYS);
if ((portp->flags & ASYNC_INITIALIZED) == 0) {
set_bit(ST_INITIALIZING, &portp->state);
@@ -1275,12 +1275,11 @@ static int stli_rawopen(stlibrd_t *brdp,
* order of opens and closes may not be preserved across shared
* memory, so we must wait until it is complete.
*/
- while (test_bit(ST_CLOSING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CLOSING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
/*
@@ -1309,13 +1308,10 @@ static int stli_rawopen(stlibrd_t *brdp,
*/
rc = 0;
set_bit(ST_OPENING, &portp->state);
- while (test_bit(ST_OPENING, &portp->state)) {
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- interruptible_sleep_on(&portp->raw_wait);
- }
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_OPENING, &portp->state));
+ if (signal_pending(current))
+ rc = -ERESTARTSYS;
restore_flags(flags);
if ((rc == 0) && (portp->rc != 0))
@@ -1352,12 +1348,11 @@ static int stli_rawclose(stlibrd_t *brdp
* occurs on this port.
*/
if (wait) {
- while (test_bit(ST_CLOSING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CLOSING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
}
@@ -1385,13 +1380,10 @@ static int stli_rawclose(stlibrd_t *brdp
* to come back.
*/
rc = 0;
- while (test_bit(ST_CLOSING, &portp->state)) {
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- interruptible_sleep_on(&portp->raw_wait);
- }
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CLOSING, &portp->state));
+ if (signal_pending(current))
+ rc = -ERESTARTSYS;
restore_flags(flags);
if ((rc == 0) && (portp->rc != 0))
@@ -1420,22 +1412,20 @@ static int stli_cmdwait(stlibrd_t *brdp,
save_flags(flags);
cli();
- while (test_bit(ST_CMDING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CMDING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
- while (test_bit(ST_CMDING, &portp->state)) {
- if (signal_pending(current)) {
- restore_flags(flags);
- return(-ERESTARTSYS);
- }
- interruptible_sleep_on(&portp->raw_wait);
+ wait_event_interruptible(portp->raw_wait,
+ !test_bit(ST_CMDING, &portp->state));
+ if (signal_pending(current)) {
+ restore_flags(flags);
+ return -ERESTARTSYS;
}
restore_flags(flags);
_
reply other threads:[~2005-03-06 23:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050306223633.B13171EFA4@trashy.coderock.org \
--to=domen@coderock.org \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nacc@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome