From: Andrew Morton <akpm@osdl.org>
To: Andy Isaacson <adi@hexapodia.org>
Cc: linux-kernel@vger.kernel.org,
linux-input@atrey.karlin.mff.cuni.cz,
Vojtech Pavlik <vojtech@suse.cz>
Subject: Re: 2.6.11-rc4: Alps touchpad too slow
Date: Mon, 21 Mar 2005 22:25:14 -0800 [thread overview]
Message-ID: <20050321222514.7f98e255.akpm@osdl.org> (raw)
In-Reply-To: <20050322061336.GA2809@hexapodia.org>
Andy Isaacson <adi@hexapodia.org> wrote:
>
> On Mon, Mar 21, 2005 at 02:44:12PM -0800, Andrew Morton wrote:
> > Andy Isaacson <adi@hexapodia.org> wrote:
> > > My Vaio r505te comes up with an unusably slow touchpad if I allow the
> > > ALPS driver to drive it. It says
> > >
> > > > ALPS Touchpad (Glidepoint) detected
> > > > Disabling hardware tapping
> > > > input: AlpsPS/2 ALPS TouchPad on isa0060/serio1
> > >
> > > and then the trackpad operates at about 1/8 the speed I've gotten used
> > > to. ... 2.6.11-rc4 ...
> >
> > Andy, could you please test 2.6.12-rc1 and let us know which problems
> > remain?
>
> With cvsbk rev 423b66b6oJOGN68OhmSrBFxxLOtIEA (rsynced Monday, it claims
> to be "2.6.12-rc1"), the situation is much improved. The AlpsPS/2
> driver recognizes the trackpad, tracking speed is back to normal, and
> tapping is turned on by default. (Drat, now I need to figure out how to
> turn that off again.)
Wonderful, thanks.
> The kernel output is a bit odd, though:
>
> [ 1200.254707] Adding 987988k swap on /dev/hda3. Priority:-1 extents:1
> [ 1200.330453] EXT3 FS on hda2, internal journal
> [ 1203.504154] SCSI subsystem initialized
> [ 1204.039053] Enabling hardware tapping
> [ 1204.099034] ieee1394: Initialized config rom entry `ip1394'
> [ 1204.266077] input: PS/2 Mouse on isa0060/serio1
> [ 1204.400583] input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
> [ 1204.779799] sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
> [ 1206.183165] kjournald starting. Commit interval 5 seconds
>
> Note how the "Enabling hardware tapping" message is several lines
> earlier than it seems it should be... I don't think I'm supposed to be
> tapping on my SCSI hardware.
>
> ... ah, I think I'm missing the "ALPS GlidePoint detected" message which
> I used to get. Without it, the "Enabling hardware tapping" message is a
> bit opaque.
Yes, alps_init() had a printk removed and now the output looks funny.
diff -puN drivers/input/mouse/alps.c~alps-printk-tidy drivers/input/mouse/alps.c
--- 25/drivers/input/mouse/alps.c~alps-printk-tidy 2005-03-21 22:23:46.000000000 -0800
+++ 25-akpm/drivers/input/mouse/alps.c 2005-03-21 22:23:53.000000000 -0800
@@ -395,7 +395,7 @@ int alps_init(struct psmouse *psmouse)
}
if (param[0] & 0x04) {
- printk(KERN_INFO " Enabling hardware tapping\n");
+ printk(KERN_INFO "alps.c: Enabling hardware tapping\n");
if (alps_tap_mode(psmouse, 1))
printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
}
_
next prev parent reply other threads:[~2005-03-22 6:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-04 22:15 Andy Isaacson
2005-03-05 12:53 ` Vojtech Pavlik
2005-03-21 22:44 ` Andrew Morton
2005-03-22 6:13 ` Andy Isaacson
2005-03-22 6:25 ` Andrew Morton [this message]
2005-03-22 7:41 ` Vojtech Pavlik
2005-03-22 13:23 ` Dmitry Torokhov
[not found] <fa.fsi044a.12gkq90@ifi.uio.no>
[not found] ` <fa.h4bjs27.mm8c1n@ifi.uio.no>
2005-03-22 14:03 ` Bodo Eggert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050321222514.7f98e255.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=adi@hexapodia.org \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®