From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261985AbVDEU2Q (ORCPT ); Tue, 5 Apr 2005 16:28:16 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261923AbVDEU2P (ORCPT ); Tue, 5 Apr 2005 16:28:15 -0400 Received: from DELFT.AURA.CS.CMU.EDU ([128.2.206.88]:40873 "EHLO delft.aura.cs.cmu.edu") by vger.kernel.org with ESMTP id S261985AbVDEUGV (ORCPT ); Tue, 5 Apr 2005 16:06:21 -0400 Message-Id: <20050405193859.506836000@delft.aura.cs.cmu.edu> Date: Tue, 05 Apr 2005 15:38:59 -0400 From: Jan Harkes To: Greg KH , Sam Ravnborg Cc: jaharkes@cs.cmu.edu, Dmitry Torokhov , Marcel Holtmann , linux-kernel@vger.kernel.org Subject: [patch 0/5] Hotplug firmware loader for Keyspan usb-serial driver Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Here is another stab at making the keyspan firmware easily loadable with hotplug. Differences from the previous version, - keep the IHEX parser into a separate module. - added a fw-y and fw-m install targets to kbuild which will install a driver's firmware files in /lib/modules/`uname -r`/firmware. 01 - Add lib/ihex_parser.ko. 02 - Adapt drivers/usb/serial/keyspan.ko to use request_firmware/load_ihex. 03 - Program used to dump the firmware headers to IHEX formatted files. 04 - Result of converting the firmware. 05 - Add "make install_firmware" and the related fw-$(CONFIG_FOO) stuff. Jan