Sorry for this poor bugreport, but I haven't had time to track it down more carefully. Hardware: Vaio r505te, i815, onboard e100 Kernel: 2.6.12-rc1-mm1 plus patch to fix GlidePoint resume hang After a swsusp resume, the onboard e100 does not pass traffic. When I was running 2.6.11-rc2 (IIRC) the network worked fine after resume. I will try to verify this today. Oddly enough, things are at least well-enough connected that the driver does print "link up" messages when I connect the cat5. doing a "rmmod e100; modprobe e100" brings it back to life. /var/log/dmesg, current dmesg buffer, and lspci -vvx are attached. I'm guessing an ACPI interrupt routing issue? -andy